How to lay rubber wetpour with A1 Rubber. For our full range of recreational surfacing products, please visit our website: www.a1rubber.com/products-info/recreational/ www.a1rubber.com
Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
(Obviously not the wetpour), but, would any of your other products or coatings work as a roofing material, for say chicken coops, sunrooms, or small farm buildings ?. Also, do you sell a coating that would work for boat decks, or truck beds ?.
You do not want it too bouncy as it will cause more damage to the child such as long bone injury. The bounce is rated in HIC (head injury criteria) using a Triax head drop tester. The base material is not the major cost but is important for surface stability. The main cost is the polyurethane used to binder the rubber granules on the surface wear layer.
Hi, where can i buy this rubber and adhesive in the UK as I have an area on my back garden that I wish to cover in this that already has a cement base. thank you
Hi Barry, we will be sending to Home Base the DIY kits in the near future but in the mean time you could try MRI Polytech, I know they have the MDI Polyurethane binder but may be able to assist with rubber granules too.
Yes wetpour can be used for driveways and walking paths. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
the binder is a single part MDI Polyurethane, ours is called Procure and the lube we use is an ester called Polysolv but the chemical name is Rhodiasolv. Diesel can be used but not as clean. see more at www.a1rubber.com
Yes it can be applied to any stable or compacted surface, crusher dust, road base, bitumen, concrete etc. not available from us yet in the USA but we may soon be adding to Home Depot in small DIY kits.
No the polyurethane coating causes it to self extinguish even with an accelerator . It would need an open flame >88 degrees Celsius for over several minutes to start it smoking
it is preferred to compact crusher dust or whatever you use to prep for a concrete slab, this will guarantee stability from rain erosion, weeds and good drainage. But technically it can be laid over weeds.
what kind of floor you want to install ?for running track or for playgroud ?there is one kind of pu top coat can be used to increase the tensile and tear strength , or you must use the good quanlity EPDM and more glue .
Using rubbaroc pics at the end there but to prevent seem when you start next day rough up edgde from pervious day so granuals work back into eachother and carry on dont just start with a straight edge from previous day or seem will be noticable
The products used by Rubaroc was from A1 Rubber, also Urban Play and several other companies. A1 Rubber is the largest supplier in Australia and NZ and does not install themselves therefore competing with it's customer base.
Hi. It is PU binder. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
This is cute. I could put it in the bed of a pickup truck:) Hmm.. It would be great in 1/2 of the backyard so I would not have to cut the grass so much. It would even be awesome in the kitchen & bathroom or the whole house. It would help my feet feel better & it prevents slipping. (Perhaps rubber tiles are better for inside the house)
Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
Great explanatory video - however, I have a couple of things that I'd pick up on: at 3:36 you're showing a very clear trip hazard, it would surely be better to have in-filled at least to the corner of the concrete slabs; secondly, the caption appearing at 4:08 has a missing 'b' from "Look at what you can create with ruber wetpour".
sorry to be offtopic but does someone know a tool to get back into an instagram account?? I somehow forgot the account password. I would love any assistance you can give me.
@Jadiel Carl thanks so much for your reply. I found the site thru google and I'm trying it out now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
No. For gym flooring we produce roll mats and tiles with these EPDM granules you see in this video. Top quality, factory price. Please let me know if you are interested. Thanks. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
HOw do you prevent "day seams"? I'm talking about when you are doing large jobs where you need to do one part one day and when you come back the next day it is dry. When you start again there is always a bad looking seam. Do you know how to prevent the bad looking seam??
You can use a ramp or key join. Just as long as your join is not only vertical. e.g. a 20mm thickness can step 10mm then horizontal then 10mm. This can be achieved with a small piece of 10mm beading pressed into the edge.
Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
Hi. This is PU binder. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
Please see the mixer in my video. I think here is a mixer you need. Nice and cheap. th-cam.com/video/G6jCb2c3DPo/w-d-xo.html Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
Or with a 11kg heating roller. We use it a lot. Makes job easier and the surface smooth and firm. Very easy to use. Here is the video for reference: th-cam.com/video/G6jCb2c3DPo/w-d-xo.html
Depending on the granules used 1-4mm will give fast drainage 120Litres per square metre per minute. The base layer if 4mesh or our Aero shockpads are used will offer 240litres/m2/minute . System is OneSafe. If a 1-2mm granule is used this will reduce the porosity down to only 10%, this will then require at least a 1-2% pitch to drain away. the 10% will allow any water trapped underneath to drain away and will give a firmer surface for outdoor furniture or light mobility vehicles, scooters etc. This is primarily used on aged care patios, around pools, verandahs, bike tracks and golf clubs, our system is called Cova Rubba.
check out www.miroadrubber.co.uk they sell all the materials you need to do this but please be aware they only sell to businesses and not the public. based in Bridgwater,Somerset UK. I cant have you waiting another year for big Vlad to get back to you.
Hello👋🙋♂️ there Amazing and very interesting🎥 video.. Super like👌👌👌 project Good information very helpful🎥 Do keep posting Warm regards and best👍💯 wishes The UnknownManCub 👍😎👨🏭
You aren't a builder and apparently you aren't very observant either. It was leveled with a float and final step was done with a finishing trowel. You should probably just stick to your day job.
How thick are you laying that, surly a 25mm will suffice on a properly prepared base. That would make the product go 4 times further. It is sold by the bag so devide the depth of the bag into 25mm sections and your bag covers 4 times the area. Do some homework before piling tons of rubber onto your drive.
You would need rubber tiles for horse barn flooring. Not sure if you need factory price rubber tiles. We would help with technical support during installation and maintenance. Eos Zhang Email: lily_gdf@hotmail.com Cell/WhatsAPP: +86-13816843215
This is not a sales site, purely discussion and info. We do not currently sell to the USA but we may in the near future to Home Depot. Sorry for the delay but we have been locked out of this account and only recently regained control.
A1 Rubber Would u want to sell to the RIGHT American? I sent an e-mail to you/filled out the inquiry on your website. The Google icon is the same as my TH-cam account. I approached RubberStone and didn't like the way they do business. If you absolutely will not sell to the US, do you recommend a US company at least? Shipping and customs are not impossible obstacles though!
We have no problem selling to America but freight costs prohibit it unless sold in large volumes. There is a company in the USA that has been following our lead, Sparton Enterprises.
I love this video because it explains how to do it and step by step guide LIKED
Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
You know you're life is going down hill when you starting watching these types of videos for no reason.
HAHAHAHAHAHAHA
Lol... is it bad I think this is cool and entertaining
Damn my life going down hill. That sucks I just thought I was bored.
😅😅😅😅
The comment made me smile.. the channel name made me lol
What does “trowel lubricant” consist of?
(Obviously not the wetpour), but, would any of your other products or coatings work as a roofing material, for say chicken coops, sunrooms, or small farm buildings ?. Also, do you sell a coating that would work for boat decks, or truck beds ?.
Are those kind of rubbers the one's used by the marines for training outside? Or were those the one used for basketball court?
is this a non-slip product? because I am busy making a product and I would like to make use of this method
great video thanks
Does this allow drainage of water through it?
Finally something to make that rubber car idea a reality.
Extraordinary video 🤩🤩🤩💙💙💙
bn dia tienen reprecentantes en colombia? saludos
I do this kind of work in southern Nevada, we use another material under the final rubber surface, make it more bouncy and lower the cost of installs.
You do not want it too bouncy as it will cause more damage to the child such as long bone injury. The bounce is rated in HIC (head injury criteria) using a Triax head drop tester. The base material is not the major cost but is important for surface stability. The main cost is the polyurethane used to binder the rubber granules on the surface wear layer.
I live in NE. How does it stand up to shoveling and salting?
Really professional, with good street shoes, nice pants, does he wear a tie?
great and very smart idea
Can I used black SBR with pigment powder instead of CSBR????
Great explanatory video,it would surely better to have in filled at least to the corner of the concert slabs wetpour
what to you do to prepare garden area with before laying
You can put it down right on top of dirt?
sounds good. .do you have agents in England United Kingdom
Softfallguys loves A1 Rubber products!
Hi, where can i buy this rubber and adhesive in the UK as I have an area on my back garden that I wish to cover in this that already has a cement base. thank you
Hi Barry, we will be sending to Home Base the DIY kits in the near future but in the mean time you could try MRI Polytech, I know they have the MDI Polyurethane binder but may be able to assist with rubber granules too.
would y pls. tell me the quantity of glue and rubber.thanks
Fantastic
Can this be laid over a big asphalt driveway? 🤔
Softfallguys loves this video!
How does this hold up in MN winters?
does a1 also sell those slipper shoes?
Pickit fencing
yeh 4.99 lol
@@dennis12879 Know more details in:
Whatsapp:+86 15107149073
Do you have a recommended adhesive for use on driveways?
Yes wetpour can be used for driveways and walking paths. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
Can you drive on this?
what is the model of glow?
what kind of glue should I use and lubricating
the binder is a single part MDI Polyurethane, ours is called Procure and the lube we use is an ester called Polysolv
but the chemical name is Rhodiasolv. Diesel can be used but not as clean. see more at www.a1rubber.com
The lubricating is silicone? I can use water and soap as lubricant?
What's kind of the lubricant
where is this product available in NY and can it be done on top of blacktop
Yes it can be applied to any stable or compacted surface, crusher dust, road base, bitumen, concrete etc.
not available from us yet in the USA but we may soon be adding to Home Depot in small DIY kits.
thanks idia
and ..how it looks after 2 years?
i like it a iwill recomend it
how safe is it, will it not burn in case of accidental contact with fire
No the polyurethane coating causes it to self extinguish even with an accelerator . It would need an open flame >88 degrees Celsius for over several minutes to start it smoking
How to re-color it periodically?
WHERE CAN I BUY THIS TYPE OF ADHESIVE? I´M FROM MEXICO
Laid straight over the weeds, nice.....
it is preferred to compact crusher dust or whatever you use to prep for a concrete slab, this will guarantee stability from rain erosion, weeds and good drainage. But technically it can be laid over weeds.
Raf M no
Em Jay your dumb as shit
@@wojo9732 Know more details in:
Whatsapp:+86 15107149073
i wanna it to do but i have a question. what rubber must i use for best tensile and tear stregnth. answer me please.
what kind of floor you want to install ?for running track or for playgroud ?there is one kind of pu top coat can be used to increase the tensile and tear strength , or you must use the good quanlity EPDM and more glue .
What "glue" is that?
How much glue should ve used?
what is the min thickness you could do with this stuff
5 mm
can I use this for gym flooring?
Why not
lem jenis apa yang anda pakai?? terima kasih sebelomnya. 😊
How bulk density epdm ?
nice
Can i use this for indoor aswell? is it good insulating, water prove and so on?
No sorry this is purely an outdoor product, it is completely porous and requires drainage.
Alecks1990 mı
If we use this material in roof terrace, it reduce heat ?
Hmmm. Good idea.
Using rubbaroc pics at the end there but to prevent seem when you start next day rough up edgde from pervious day so granuals work back into eachother and carry on dont just start with a straight edge from previous day or seem will be noticable
The products used by Rubaroc was from A1 Rubber, also Urban Play and several other companies. A1 Rubber is the largest supplier in Australia and NZ and does not install themselves therefore competing with it's customer base.
i want to have it
is the glue some kind/type of resin??
Hi. It is PU binder.
Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
Where can i buy that rotatub?
You can buy direct from our factory www.a1rubber.com and see more at www.rotatub.com.
we ship all over the world.
where can i get coloured powder or how do i make one .
Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
This is cute. I could put it in the bed of a pickup truck:)
Hmm.. It would be great in 1/2 of the backyard so I would not have to cut the grass so much.
It would even be awesome in the kitchen & bathroom or the whole house. It would help my feet feel better & it prevents slipping.
(Perhaps rubber tiles are better for inside the house)
Tyyyyiii8
Tyyyyiii8
what kind of glue is using?
That is a MDI Aromatic single part humidity curing polyurethane. A1 Rubber's is called Procure.
Can it be used as a drive way?
For your golf carts sure.
whats the standard thickness required?
Usually 25mm is okay
seems easy enough.
Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
Great explanatory video - however, I have a couple of things that I'd pick up on: at 3:36 you're showing a very clear trip hazard, it would surely be better to have in-filled at least to the corner of the concrete slabs; secondly, the caption appearing at 4:08 has a missing 'b' from "Look at what you can create with ruber wetpour".
sorry to be offtopic but does someone know a tool to get back into an instagram account??
I somehow forgot the account password. I would love any assistance you can give me.
@Immanuel Kason instablaster =)
@Jadiel Carl thanks so much for your reply. I found the site thru google and I'm trying it out now.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@Jadiel Carl It worked and I now got access to my account again. Im so happy!
Thanks so much you saved my account !
@Immanuel Kason no problem =)
Can u tell me the proportion of rubber and glue.
It will depend on which type of granule used but for SBR and CSBR (pre-coloured recycled granules) 20kkg of rubber to 4 litres of PU binder.
+Vlad Impaler thanks
What will be the proportion of EPDM and PU Binder
Both our EPDMs use 4.5kg of binder to 25kg bag of EPDM 1-4mm granules.
if the size is smaller then more binder is required due to surface area.
Shouldn't he have long sleeves and gas mask?
Wow, look at those f'n shoes. LOL
can you also use this for gym flooring?
No sorry it is purely an outdoor product as it is porous and water needs to flow through to clean.
No. For gym flooring we produce roll mats and tiles with these EPDM granules you see in this video. Top quality, factory price. Please let me know if you are interested. Thanks.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
HOw do you prevent "day seams"? I'm talking about when you are doing large jobs where you need to do one part one day and when you come back the next day it is dry. When you start again there is always a bad looking seam. Do you know how to prevent the bad looking seam??
use a straight edge and cut with a Stanley knife
You can use a ramp or key join. Just as long as your join is not only vertical. e.g. a 20mm thickness can step 10mm then horizontal then 10mm. This can be achieved with a small piece of 10mm beading pressed into the edge.
please, good afternoon as the glue is called for the product, thanks
Abrir en Google Traductor
Hi. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
@@eoszhang790 mi cel es +5491162944460 jose
@@josetomasadorno3747 Thanks for your reply. I just sent messages to you on WhatsAPP. My number is +8613816843215. Email: lily_gdf@hotmail.com
I took a look at your website, but it is very hard to search for the products I want, and see prices and do calculation how much I need.
Which glue to use?
single component binder can be used to mix the rubber
Hi. This is PU binder. Not sure if you need factory price EPDM rubber granules and PU binder. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
I honestly just wanted to see this cuz its how my elementary school was... *flashback* good old days, now its off to high school... oh well
Know more details in whatsapp:+ 86 15107149073
تحياالڨور
what is the glue (reference)?
The glue (binder) is a single part natural curing MDI polyurethane called Procure. see www.a1rubber.com for more details.
A1 Rubber
yea products looks great especially if its made from recycled tires....but where in the hell do u get a rubber mixer....
+milldabeast519 they're based in qld australia.
Please see the mixer in my video. I think here is a mixer you need. Nice and cheap.
th-cam.com/video/G6jCb2c3DPo/w-d-xo.html
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
Isn't the trowel a bit much?
I could level that with a snow shovel.
Or with a 11kg heating roller. We use it a lot. Makes job easier and the surface smooth and firm. Very easy to use. Here is the video for reference:
th-cam.com/video/G6jCb2c3DPo/w-d-xo.html
Is it a porous surface?
+watchthe1369 yeh like 70%
+Haste h thank you
Depending on the granules used 1-4mm will give fast drainage 120Litres per square metre per minute.
The base layer if 4mesh or our Aero shockpads are used will offer 240litres/m2/minute . System is OneSafe.
If a 1-2mm granule is used this will reduce the porosity down to only 10%, this will then require at least a 1-2% pitch to drain away. the 10% will allow any water trapped underneath to drain away and will give a firmer surface for outdoor furniture or light mobility vehicles, scooters etc.
This is primarily used on aged care patios, around pools, verandahs, bike tracks and golf clubs, our system is called Cova Rubba.
This stuff should be used around pools. I can't tell you how many times I've scraped myself on the concrete.
There is version of this available through the Bunnings Chain called Pour In Place for pool surrounds or the commercial product is called Traqua
We will soon be supplying this through Home Depot in the USA and Homebase in the UK
Vlad Impaler have not seen or heard of it, what's the hold up?
check out www.miroadrubber.co.uk they sell all the materials you need to do this but please be aware they only sell to businesses and not the public. based in Bridgwater,Somerset UK. I cant have you waiting another year for big Vlad to get back to you.
Wear deck shoes lol
why has he not got work boots on
I guess you missed the part where he said: "where ever you require a 'non slip' surface"
I wonder what this is useful for.
Tons of things. Walk ways. Driveways. Entrance steps. Playgrounds. It's quite useful honestly.
Use a cocktail stick!
Hello👋🙋♂️ there
Amazing and very interesting🎥 video.. Super like👌👌👌 project
Good information very helpful🎥
Do keep posting
Warm regards and best👍💯 wishes
The UnknownManCub 👍😎👨🏭
I lay rubber every time cause I like to play it safe lol
Know more details in whatsapp:+ 86 15107149073
I'm no builder, but thats not a Trowel it a Float.
👍
The wooden or plastic float is used for compaction at 3.02 he changes to a stainless steel finishing trowel.
Glad im not the only dick on the net that caught that.
You aren't a builder and apparently you aren't very observant either. It was leveled with a float and final step was done with a finishing trowel. You should probably just stick to your day job.
that dude is a shocking layer i do this for a job
this is not about the laying, it is show casing the simplicity of the product. It is sold also as a DIY kit through the Bunnings Chain.
They use this in playgrounds
this rubber is EXTREMELY slippery when wet
No actually. It isn't.
Man when i want to lay rubber i just hit the gas pedal dude. It a lot easier then the way you do it. He he
you will need about ten thousand dollars worth of processing equipment, just add glue!
How thick are you laying that, surly a 25mm will suffice on a properly prepared base.
That would make the product go 4 times further.
It is sold by the bag so devide the depth of the bag into 25mm sections and your bag covers 4 times the area.
Do some homework before piling tons of rubber onto your drive.
I wonder how this would work in a horse barn?
I would recommend that you try dog bone pavers instead of this for your horses :)
You would need rubber tiles for horse barn flooring. Not sure if you need factory price rubber tiles. We would help with technical support during installation and maintenance.
Eos Zhang
Email: lily_gdf@hotmail.com
Cell/WhatsAPP: +86-13816843215
Le mec te met du ruber mais te laisse un angle de bordure bien pointue
way has he not got work boots on
I don't know way
This is a small example in a private garden bed it is not a worksite.
MrBlackbeltkickboxer n
Haha definitely need a lesson in laying rubber wow shocking if any of my lads put that in a slap the head clean off !
Where are the EGGS??
Looks like a pain in the ass to apply and use.
Bet that’s full of weeds now 😅
You could have done allot better on your grade and saved allot of material and labor. 😕
Why are you not replying to potential customers?
No offense but somebody needs to be hired or fired.
This is not a sales site, purely discussion and info. We do not currently sell to the USA but we may in the near future to Home Depot. Sorry for the delay but we have been locked out of this account and only recently regained control.
A1 Rubber Would u want to sell to the RIGHT American? I sent an e-mail to you/filled out the inquiry on your website. The Google icon is the same as my TH-cam account. I approached RubberStone and didn't like the way they do business. If you absolutely will not sell to the US, do you recommend a US company at least? Shipping and customs are not impossible obstacles though!
We have no problem selling to America but freight costs prohibit it unless sold in large volumes.
There is a company in the USA that has been following our lead, Sparton Enterprises.
They had this at my school in 6th grade some kid busted his front teeth out and broke his nose on it.