✅ Plasterboard Dry Lining Plastering 👉 Drywall
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2024
- 🔰 How to install and PLASTERBOARD Ceiling 🔵 SAW Profiles 👉
🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
• 🔰 How to install and ...
What are plasterboard ceilings?
Plasterboard ceilings are coatings under the slabs or horizontal elements made up of metal profiles. They are intended to hide facilities and decorate enclosures. They provide fire resistance, improve acoustic and thermal insulation.
There are semi-direct, suspended and without crashes.
The semi-direct ceilings are formed by a structure of galvanized steel sheet profiles based on masters, anchored directly to the slab, to whose external side one or more Pladur plates are screwed.
Suspended ceilings can be formed by a structure of galvanized steel sheet profiles duly suspended from the floor by different types of hangers, and supported by mechanically fixed profiles around the entire perimeter.
They can also be made up of a double structure, primary and secondary, positioned at the same level or at different levels.
When it is at the same level, the primary structure is suspended from the slab by means of hangers and the secondary is joined to the primary with crossing accessories, both supported by profiles fixed around the entire perimeter.
When it is at a different level, the primary structure is also suspended from the slab by means of hangers and the secondary structure is duly suspended from the primary by means of clamps and supported peripherally on the perimeter profile.
The ceilings without overhangs are formed by a single structure of uprights duly supported on the lateral support walls, by means of channels and fixed around the entire perimeter.
I would also use screws to make sure that plasterboard wouldn't fall off at least around the edges, and I would also use an insulating net between the gaps to make the connections unified other than that great work and good isea to make job more easy .
You dont screw it
Cómo se llama la lámina y el pego
que está pegando. Gracias
Brother nice work salute
Mrb kolay gelsin ellerinize emeğinize yüreğinize sağlık 👏👍🧿🧿🧿🙋
This is nice, but I’ve always wondered.. when people plaster drywall on a brick wall, how does the cold/hot air from the outside stay out when there’s no insulation
That was my 1st thought also.
you dont care cause you resell it. that is how these houses are renovated for
put a styrofoam facade on the outside and it will be insulation, so you don't have to install insulation on the inside of the house
You’re supposed to put a solid line across the bottoms and the tops of the wall also down the sides with the adhesive.
Rule one ..Plasterboards should be horizontal and staggered ... Doh
السلام عليكم..
اتمنى لك التوفيق..
...
هل هذي الالواح جبس بورد؟؟
Muchísimas gracias ☺️
Cuál es el adhesivo ? Lo aseguras con algo más ? 🤔
No just boar adhesive
What is the adhesive used?
That's what I'm wondering?
gypsum cement (gyprock)
Board adhesive 👍
What kind of adhesive should be used for the acrylic glass block ? Thank you.
What if the brick is painted can I still do this?
As long as the paint is not coming off, you should be good. Maybe rough it up with some 80 grid beforehand? And do not forget to prime the wall!
What do you use to prime the wall?
Som people use pva
@@Mattlawton-ft6ew what is pva?
@@zarkomarko4640 well its a water based glue polyvinalacetate but its not to good so use sbr its good stuff and water resistent 👍
glボンドが一番いいですよ
何カ所か ビスうちしておけば 間違いない
ماهو المعجون
what's the soundtrack
Kup se pozomnicę 2,5m
Oraz laser 360.o
Стандартные ошибки самоучек, неужели проити обучение и делать правильно труднее , чем портить материалы?????
Turko