why are the MJX Hyper Go car so good? let's reveal their secrets!
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2024
- MJX Hyper Go cars are good, very good... But why...? Let's reveal it's secrets!
Upgraded servo: s.click.aliexpress.com/e/_EGN...
Choose the 17g, S0017M
The car:
▶️ s.click.aliexpress.com/e/_Evg...
Another great car:
🎬 • Fastest 1/14 scale bas...
RC is more than my hobby, its a lifestyle!
Therefor I'll post a lot of RC stuff video's on my channel and I'll do my best to give you hours of entertainment and knowledge.
Only with your support I can keep posting new stuff, thank you!
(affiliated links may be used to support the channel) - แนวปฏิบัติและการใช้ชีวิต
Dude, nice video. I just got a car based on this and am super new to RC cars. Super helpful and thanks for taking the time to make this.
Thanks you so much for showing how to disarm the car! I am new to the hobby with a hypergo H16BM and I had no idea how to proceed to dismount the parts on my first meticulously maintenance. I already ordered some 50w 750 cts shock oil from team losi and the combo traxxas for differentials. Thanks for the tips on the parts like spur gear and diffs. In case I need to replace them I will go with the exact same stock parts. Again thanks for the info and I’m subscribed now :D
Thanks, you're welcome
This was very helpful. I was looking at buying this model.
Cool video. I just placed the MJX into the shopping basked at ali :) Based on your review and this video, I am sure it will be great.
Nice! Hope it arrives soon and you can enjoy it 🤟🏻
Nice Vid. But not everything is correct. The metall diffs in the vid at about 4min are not from mjx, as you see on the round drive axle. The mjx axles are hexagonal.
The stock gears are die cast zinc alloy. Which is cheap to produce, but it is very soft. Ok for 2s. For 3s not durable enough.
There are Y parts - (powder metall) and G parts (milled steel) also availble original from mjx on ali. If you run on 3s its the better choice. The little more way is not makeing a big Difference.
Weak point also are the screws in the diff case. They can break and the diff opens.
The stock axles can break on the cvd pin.
The chassis are durable. I only break one rear tower on my 14210.
What is not goid, that the car has no slipper clutch, so much force goes through rhe drivetrain at on speed landings.
I git 4 mjx. Good cars, but not perfect. Have problems like every other car, if you drive them a lot.
Greetings from Germany 👍
Thanks for your ad on
@@hofsplace 👍
I think i Drove about 100 lipo Packs in the 4 MJX together.
All in all i Like them a Lot, cause AS you say. The Quality is good For the price.
And you can Put them in a Backpack and Take them with you.
I think i Make a Review vid some day.
@@buttracerrc indeed. Did you see my review of the 14210?
th-cam.com/video/Qidp3NymZxo/w-d-xo.html
Thanks, I'm a complete beginnerand I've just bought a 16208 and am prepared to run on 2s initially but then move to 3s and upgrade the spur when I'm in more control of it
If you can answer me I would appreciate it:
-Throughout the life of these cars it is natural that lubrication is necessary..
From what I can understand, you can only access the parts that may need lubrication by demonstrating, right?
Dismantling, for someone who doesn't have experience, can be ehh... a great adventure with a lot of things that can go wrong, especially when it comes to putting it back together.
How often should lubrication be carried out?
Should a special lubricant be used or should ordinary grease be enough?
Thank you!
Hi, maintenance extens the lifetime. Sand and water are your main problems.
When disassembling your car, lay everything in order how you removed it and make lots of photo's when doing. I think i made a video where I disassembled this car, not sure, surf my channel please
nice tear down, how we come al ong way from the Older styles, I see no slipper clutch, why the drastic torque wheelies on demand.
Hi, no, there's no slipper clutch. The getting better all the time
and that is where control takes place thanks @@hofsplace
Hi, could you please tell me, if there are better quality bearings for the MJX? And if so, where can i find them.
Thanks in advance for your help
Regards
Hi, take some measurements of them and search for rubber sealed bearings. Don't buy the cheapest ones, by them from known brands, Tamiya, Traxxas, HPI etc.
@@hofsplace Ok, next time i disassemble it i'll poste the measurements. 👍
@@diogocarlos1 just sent the measurements to your local RC dealer, they probably have the needed bearings.
Hi..i watched your videos..can you help me.I bought new one 16210
But my hypergo reverse function not working properly why is that
I tried multiple things, but I can't replicate your problem, sory
Nice video. Are you Dutch by any chance?😁
Thanks, yes, I'm
How to upgrade the lights in this car?
It's a fixed bar, so upgrading isn't ideal. Just add an extra on the roof for example
How close this car
Hi, sorry, don't understand your question
Hi Love from india ❤ have instagram??
Thanks! Sorry, no insta
@@hofsplace any social??
@@sangwan2364FB, Fabian van het Hof, but I don't use it to post stuff myself. I use it to reply in all RC groups