$5 FIX: How To Fix a Broken Car Mirror
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- Hey Guys! This is how I fixed my car mirror for around 5 dollars! The mirror broke off completely in one piece, and in the video I show you the easy diy way to fix a car mirror that has broken off. It is very simple, all you need is some construction adhesive and some tape to act as a clamp to hold the broken mirror back on.
#Javi30DayChallenge
#Javi30DayChallenge
Please Leave a comment about what you'd like to see next!
Purchase my creations!
goo.gl/tcgeYd
Support me on Patreon: / dylansdiyworkshop
Hey everyone! My name is Dylan Taylor, and this is my DIY channel!
Subscribe: / dylansdiyworkshop
Vlog channel! / dylantaylor
Reaction Channel: goo.gl/McKLgh
How to wood Burn: goo.gl/HVeNko
How to make a wooden pipe (Basics) : goo.gl/phs6cZ
Instagram: @dylansdiyworkshop
----
? DOCTOR VOX - Endgame
• Video
/ doctorvox
/ doctorvoxofficial
---- - แนวปฏิบัติและการใช้ชีวิต
Its been a month and a half of cold weather. I took the tape off after 2 days. It has been holding fine!
Will it hold up on highway driving?
absolutely. hasnt failed yet. been through 2 winters and hled up to going 120mph many times
Dylan's DIY Workshop Awesome thank you! I’m letting my mirror dry!
I need to make mine turn again
Dylan's DIY Workshop how much would it cost to repair only one side mirror ? Specifically for a g35.
JB Weld is cheaper and easier to apply. Just grab a tube at your hardware store. No need for a caulking gun. Since it's a two part epoxy, it will set up faster and cure harder. Mine lasted for 7 years in cold/wet Seattle weather.
cheaper probably. easier. not sure, with trying to mix up enough and not too little or too much. and then spreading it on. Id argue thats around the same difficulty level
THANK YOU FOR YOUR COMMENT 😄 am going to try it
Can I apply it in cold weather?? Or should I pull it into the garage with a space heater 🤔? Serious question
This happened to my daughter's car mirror, it got knocked off in a parking lot. So would I follow the same steps when I use the JB Weld on her mirror?
@@stephaniekeller4349yes
It's great to see car guys DIY-ing their own car repair. You get to save more money and learn your car more.
absolutely. I'm trying to fix my car now. it idels but no throttle response. here's a video of whats wrong with it in my knowledge. maybe you know what it could be th-cam.com/video/MLiIZevR-3g/w-d-xo.html
Thank you so much for this video. Broke my mirror last night and your video helped immensely
Worked for me!!! Spending around $13 bucks for the glue and caulk gun is a lot better than paying a shop $500. Thanks!!!
much better off!
How long did this fix last?
a long time. It didnt fail until something fell on it when it was parked in a barn
My mom hit her mirror about once a year on the our garage door it’s not funny but funny at the same time!! Nice video
+Zane Ash oh man that would just suck to hit the mirror off the same way more than once...
Thanks man!
Zane Ash that just happened to me it funny but not funny to me also because I gotta fix it
It happened to me eighteen years ago when I was 21and dumb. Lol! Now less than 24 hours ago it happened again, just in a different car. I’ve been so mad at myself after it happened, because it happened so quick and fast!
🥴😆😆
My mirror flew off while trying to pull in to get gas lmao. this video helped immensely and I appreciate you updating us 2 years later!
I'm pretty sure someone broke your mirror amd then put it back on without telling you.
Taking a corner usually doesn't break a mirror
Great video, gonna try this the shop told me about 300$! Seems easy enough
This has held through the whole winter and to any speed the car has gone since
This will be such a help to lots of people, Dylan! Awesome
+Make It Soph I really hope so. I'm sure mirrors fall off more than you'd think lol
You don't have to plastic wrap the end of the caulking tube. Just squeeze until a little bit comes out the end of the tube and let it dry. It will act as a plug. When you're ready to reuse the caulk for something else, just pull out the plug - good to go.
awesome tip man!
Or we can do it the way we want
@@rjdatdude23 well its more so that its a time saver why spend the time wrapping it when its unneeded
Woah man, Thank you!! i’m gonna try this very soon. My mirror got hit in a parking lot :/
I’ve seen this vid a few times but today is the first time I watched th whole thing. I thought fasure the publisher would be like 40😂😂
hey dylan, wondering if there will be any difficulty removing the mirro and install a new one later on?
Thanks Dylan. I'm going to get the supplies tomorrow to hold my loose mirror assembly til I my mechanic can come and replace it . The mirror is not broken but it doesn't adjust.
I crashed my side view mirror while exiting the car wash. Thanks for saving me! 😅
Mine broke this morning. The inside is exposed. I’m to broke to buy new one. I’m gonna tape the hell out of it lol.
tuck tape and duct tape
You go girl, I was thinking about doing the same mfn thing. 🤣🥂🧡
Yessss,🤣😂🤣😂🤣 this just made my night . Careless ppl just don't realize how their 🚗careless driving really inconveniences us responsible people 🤙✔️👍🚘
Did the tape rip off ur car paint
no it didnt. it left some tape residue though
Worth watching just for the blade in the handle trick. Nice
+Do It I'm really glad we both learned something new from this!! Thanks for watching!!
We’re you still able to adjust your mirrors from the inside with the switch if you have one? Or is it basically stuck in one position?
finnnne i'm gonna do it myself ! thanx lol
YEAAAA
Nice job for DIY-ing! Great method for a quick fix, Dylan. Just curious about that construction adhesive. What exactly is the type of construction adhesive you used here?
PL Premium by Lepage. This held up all winter and up to 120mph its still holding to this day and was applied once when the video went up
Awesome!
@@DylansDIYWorkshop what about the got summer months?
held fine since the video. 105° F down to -10°
hey did was it okay with rain too? and snow?
Thanks for this right here ❤
Would this also work if the entire mirror housing popped off from the car neatly and didn't break as bad? From what i can tell only the ring inside that holds the mirror on is broken.
Just curious can you still adjust the mirror from inside your car or is it stuck in one place with the caulking
Do you gotta hold it down for a bit of did the duck tape do the holding part good
the longer youd hold it the better but I think the tape did d a good job
Did you take the tape off after it dried ?
eventually yeah
You can open the door and use a clamp overnight instead of taping for a way better result.
Unless it looks like rain...but what kind of clamp?
My mirror is similar to this one, also a VW. But is broken the part where the red joints the black, and that part is hollow inside, i tried to use superglue but it didn't work. Do you think I could buy a new black part and try to join it to my mirror? Electrically it works fine.
always cool to help. man, who is that track flowing in the background
What kind of tape did you use?
I just broke my mirror pulling out of garage this works w any mirror?
Great. Thank you so very much. I've only been using duct tape and that doesn't last.
Hey, this happened to my daughter's car so I have a few questions, how long did you have to keep the duct tape on after you put the caulking on the mirror? Also how long did this work? Did your mirror ever break off again?
a few days for the tape. it lasted for normal use for another year or 2 until I put the car in storage
@@DylansDIYWorkshopI checked and it says that the adhesive fully cures after 24 hours.. think that’ll be enough before taking the tape off? Asking cus I just put it on this morning and it’s supposed to rain tomorrow..
I'm going to try just because of your shoes you don't spend no extra money. Thanks good looking forward
Thankyou so much for this. Saved me a lot of money lol.Ill sub you.
Could I use boat tape or shipping tape without ripping the car paint off? Do you by chance know?
haha nice i just taped mine too
Thanks
I’m gonna try this, fingers crossed. I’ll tell you how it turns out!
I hope it works out for you
Howd it turn out
awesome awesome thanks for the video,,,,,i thumbs uped it at number 655
Well done.. Thanks.. and congrats...
where can i find i gun thing like yours? is it necessary?
caulking gun. harware store.. not necessary if you buy the glue in a squeeze bottle
Do you feel that the glue helped afterwards? Also wondering where you bought the glue?
the glue is what holds it. the tape is just there to hold it while the glue dries. you can get it at your local hardware store
Dylan's DIY Workshop Okay! Would you say that it worked well with no issues? Also Do you know about how long I have to keep the tape on to make sure the glue is in place? And were you able to drive it as it dried or didn’t drive for a couple of days as it dried?
@@DylansDIYWorkshop what kind of tape is the red tape you used? and, did it take any paint off your vehicle?
I'm about to try this How long did it actually last ?
hasn't fallen off yet. so however long the video has been up for ;) It was also frequently subjected to 120+mph wind speeds
@@DylansDIYWorkshop Is it still working?
still is yes!
the mirror is still on
What is the stuff called that you used?
What’s the name of the glue you used ?
LEPAGE PL PREMIUM is what its called. Im from canada. so either order on amazon or find something similar
I broke my friends side mirror. And what is the exact sealant did you use?
Pl premium. same as In the video
Also, what kind of tape are you using and can I drive my car with the tape on, without it falling off? Thank you so much!
+Judy Soto the tape that I used is tuck tape. It's the tape that you use for vapor barrier, it's as strong as duct tape without the webbing in it. I chose it because it is weatherproof once applied. You have to make sure that the surface is dry before you do this for both the adhesive to work and the tape to adhere. As long as the edges of the tape are held down and flipped up a bit. You should definitely be able to drive with it on there I drove with the tape on there for 3 days before I peel the tape off which gave the construction adhesive time to dry. I would leave the tape on for at least that long if I were you to make sure that it's it's dry. The mirror isn't quite as strong as it used to be but it's still much better than having to get it fully replaced.
Dylan's DIY Workshop hey Dylan I have a quick question 😊 how long do you let the adhesive dry? Are you able to use the car without the tape?
It was cold near me, so it took 2 days. If it is in the proper set temperature, its usually 24 hours
Dylan's DIY Workshop awesome! Thank you 😊
How long did it hold up?
until a board fell on it in a barn. So from normal use Id say it was probably a year. Mightve lasted a lot longer
@@DylansDIYWorkshop I ended up learning how to replace it properly by just removing the door panel took me only 15 minutes to replace and got the replacement mirror on Offer up for only $50. Well worth it!
Simply unscrewed the old one and screwed on the new one well worth it
What if the black part is cracked? Will this work?
+Judy Soto it depends on how cracked it is. What I would do is do my best to get that adhesive in between the two parts of the crack and if necessary I would break the where the crack is. I would try to part until it snapped. That way you could put the proper amount of adhesive between the two pieces they should go back together
What the think called? The thing you repair the car?
Hi, how long did this end up lasting you?
2 years
Haha. Red green would be proud
+Wes Hamstra Bhahahahahahaha I was actually thinking of him and that van when I was doing this :)
Dylan's DIY Workshop haha! The possum van
+Wes Hamstra Haha yeaa man!
What kind of glue are you using?
PL PREMIUM
Just saw this video . do you take the tape off afterwords mine is white
yeah i did take it off. if it leaves residue use goo gone to take it off
@@DylansDIYWorkshop you think it can stick even if it had wires and corner broke or chipped ? 😳😅🕵
with enough glue and tape. yes
😂 to the knee action
Looks a nice kid
Great vid! Hey my wife just did something very similar, on a Nissan rogue, they said get liquid nails, not the same as this?
THanks!
it might be. but the stuff I used is rated for exterior use. make sure thag whatever you get also is
Dylan's DIY Workshop thanks will do it's a lease too
make sure theres no squeeze out on the edges then.. because that would be obvious that it was quick fixed
I’m hoping to try this on mine, it’s cracked and falling off but not all the way yet
Hope it turns out good
My side mirror collided with a post. I was on my way to work. Luckily I had electrical tape with me. Ugh.
Thanks for sharing!!
of course!
Jb weld would be 10 times easier, and stronger....just get the double syringe epoxy for plastic that only mixes when you squeeze it out of the front.
Lol imagine the poor sap who tries to replace the mirror correctly only to find a bunch of caulk blocking the proper screw holes.
the screw holes were stripped out with the mirror coming off
Kakav majstor 😂😂😂😂
Do you think JB weld would work?
yeah. but it costs as much as the whole tube of the cement I used. and you have to mix it
what is the red tape called
Tuck Tape. sold in Canada. Its a Vapor barrier tape.
my neighbors are pricks and leave the cans in the street and its a one way street so guess what happened someone came by exact time i did and boom clipped my mirror
Meee rn
So how long did it last?
2 years. lasted much longer than the car did. it only let go because we hit it with the tractor. also, wind will not rip it off. we had it up to 210kmh (~120mph) and it didnt budge
How long did you let it sit for
With the tape
a day
Is it still holding up 2 years later
surprisingly yes. I dont drive the car anymore and we scrapped it all out. but the mirror stayed on until we accidentally hit it with the tractor a month or so ago
Thanks bro you just saved me a lot of money u should put ya cash ap up
I dont have a cash app. But I do have patreon! www.patreon.com/dylan_taylor
Nice 👌🏾 my dumbass knocked the mirror off LOL!
One year later and I’m in the same position 🤦🏾♂️
rip man. hope you can get it fixed again!
I’m a new driver and it happened to me today, I was about to cry thinking I’m so dumb and maybe driving is not for me, but reading these type of comments make me feel not alone 🫶🏽
Well...........................................................? Did it work and hold up?
yes it did for over a year until it got broken by something falling on it while it was in storage.
How long did it last
many years
So in the meantime I can just use tape?
uhh maybe.
will this method pass inspection
if there isnt any glue squeezing out. and you take the tape off. Im sure it would. as far as I know they dont dismantle your entire car when doing an inspection.
whats the background song? plz
I realize that I didn't use enough mastic. And, I should have left the tape.
My mirror busted off as I was driving away from the McDonald's drive thru window.
glue er back on
Has it fell off yet?
Lean a heavy piece of wood against it so it pulls in real tight. There is too much give in Tape.
i just crashed my moms car
Can I drive the car with the tape on
I did
Need a c-clamp to hold that on
or enough tape
I feel like it won't hold for very long
LOL, Using your pants as a rag.
That fire in the yard looks too close to the tree overhead....just warning you of the risk.
had a neighbor screaming at me about it. told her not to worry. I was there at the fire with a hose running the whole time
well, is it still holding up??Please tell us. Thanks
It did for a couple years. Then something fell on it when it was stored in a barn. I scrapped it not too long after
Wow, thankyou for replying so quickly. I have a 2002 Golf, the mirror got bumped into and the little nodules under the triangular black housing part that attaches to the car...snapped off...need a good fix.A few years would be awesome, looks like it would have lasted longer if something had not fell on it. Thats pretty good
I would guess it wouldve lasted many more years of regular use. and when it finally did go you could just scrape/break off the dried glue and re glue it
@@DylansDIYWorkshop Thankyou, we will be doing that tomorrow. Awesome.
Nice meme
+Sir DeKong meming on all the videos
Hey Dylan. Why not get a job at the dealerships body shop, experience all day long, link them this link 100% hired.
OH HECK YEAH
Hey , you NEVER mentioned , how long will it last ?? 😢😢😢😢
Secondly , the surface area , that your car mirror has , is huge , not all cars areade that way these days now the accidental BREAK of the mirror usually happens on the weakest line of contact , which is not have a huge surface area as in the video !!!! Please make a video about that realistically that's important. Rather than this kind of a fairy tale video 😅
Bikers hate him
Would this work if i do this in hot weather (97°)? Even if I left the tape on for 2 days, wouldn’t it fall?
Your best bet would be to do it somehow where it wouldnt be that hot. if you cant do it in a garage. if theres any way to leave it in the shade of a tree for a day... or apply it at the beginning of the night. it should be good. I left the tape on for a few days myself. it never ended up coming off.
Dylan's DIY Workshop yea I was thinking at the beginning of the evening so it’ll be cooler. I’ll leave the tape on for a day or two. Thank you SO much for replying. I’ve thought about doing this to my car for like 2 weeks now and I think I’ll try it out today. Huge thanks!!!!!!
Is it still on tho
it lasted 2 years. Then I scrapped the car
@@DylansDIYWorkshop ima hit up home depot get the duct tape and the rest of the items.real useful video bro
@@retroknxfe824 let me know how it works out! if its really cold outside there like it is here, you might want to do it in a garage. and give the glue extra long to cure
Temporary fix . Someone hit my car and knocked my mirror off
my temporary fix lasted 2 years until I got rid of the acr
It is better to get a heloing hand of a friend
This is Michaels mama can you put E6000 glue instead
not likely. being that there is dirt and the pieces wont fit together perfectly. you want something thicker like the pl premium I used. not to say e6000 wouldnt work. but from what I know id trust the way I did it more
Is it still holding up? Lol
👏👏👏
hope it helped!
Clap your hands
Look up cars are BMWs
Clarke transport
Did you
I bet a hot glue gun would fix this as well
I doubt that. I've never known hot glue to work well with things that receive any amount of force on them.