Install a Salon Shampoo Bowl Hair Wash Station

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ก.ย. 2024
  • Detailed video explaining how to completely install a shampoo bowl hair wash station and a back bar. Bowl and salon chairs purchased and shipped freight from Minerva beauty. I speak specifically on assembling chairs, how to use concrete anchors and secure the bases to the floor, the steps to attach the sink to the bowl stand, hooking up the plumbing, water lines, and fixtures and where may be the best place to install. I also give tips on making the process easier and issues I came across during this project. This can be a do it yourself project aside from maybe hiring a plumber to tap into your commercial water source.
    This setup has worked really well in our salon, "Deeply Rooted", in West Hartford, Connecticut. The reclining chairs are made of leather and very comfortable to our clients. The bowl itself also tilts front and back to allow a better comfort level.
    I also built a back bar out of plywood with a pine top so the stylists can store their shampoo, conditioners, and hair treatments.
    Follow me on IG @illGetMyTools

ความคิดเห็น • 72

  • @michaelhofmannjr.8807
    @michaelhofmannjr.8807 2 ปีที่แล้ว +3

    From looking at the drain, that fixture is double trapped, That trap should be lower so the drain hose from the sink does not create another trap. In Jersey a Hair trap is necessary to be installed as well. And as other qutes no Teflon tape on compression fitting , I myself use liquid teflon on all compression fittings. Holding back on that valve body is important as well while connecting the spray hose.

  • @cristinadelapava-garcia3340
    @cristinadelapava-garcia3340 2 ปีที่แล้ว +1

    Thank you for posting this! Ive been going crazy trying to figure out how to remove a shampoo backwash to move and reinstall! Im so glad I found you lol Thanks again

  • @gsogso3444
    @gsogso3444 3 ปีที่แล้ว +4

    Great job..thank you.I have any experience doing this....I'm the hair stylist....so...will see wish me luck😬🙄🙏....just trying to save some money...

  • @Ashley_felix
    @Ashley_felix 2 ปีที่แล้ว +2

    Boriiiiiicuaaaa!! Very detailed video thank you.

    • @Trade1348
      @Trade1348 2 ปีที่แล้ว

      Haha thank you. It was one of my earliest videos so it wasn’t the best!

  • @newimage08
    @newimage08 8 หลายเดือนก่อน +1

    How did you set the connection up to add the grey drain pipe ..please

  • @josephpuchel6497
    @josephpuchel6497 4 ปีที่แล้ว +4

    Hey I like this plumbing setup. Do you have any spec information on plumbing materials dimensions drain pipe size. I would like to duplicate this. Thank you

  • @doc4urcomputer
    @doc4urcomputer 3 ปีที่แล้ว +3

    No teflon tape on compression fittings or braided hoses to brass pipe or shut off valves. Hoses have rubber seats that seal against end of pipe on the one end and brass to brass seats on the compression side. Teflon tape or pipe dope is for threaded fitting, elbows, couplings, unions, either brass, steel or plastic.

  • @leslieduh106
    @leslieduh106 6 หลายเดือนก่อน

    Do you have any advice on how to make the water pressure better with the system ? I added the eco head and I notice the water doesn’t come thru as well as my sink it’s connected to.

  • @krisgillis666
    @krisgillis666 3 ปีที่แล้ว +3

    what was the fitting you used on top of the trap

  • @carlosbolanos1070
    @carlosbolanos1070 3 ปีที่แล้ว +1

    You dont need plumber's tape for those conection, the gasket on the hoses is what seals those conection. It doesnt damage it, is just that dont need it.

  • @natekarr
    @natekarr 2 ปีที่แล้ว +1

    How do you expect that to drain properly? Your soft flex tube is going uphill to the hard piped p-trap....

  • @FaithInCurls
    @FaithInCurls 2 ปีที่แล้ว +3

    can you explain how you built the backbar to cover the plumbing?

    • @IllGetMyTools
      @IllGetMyTools  2 ปีที่แล้ว +3

      That’s a lot to say. Basically I just built a frame out of 2x4s and covered the front and sides with a Sheet of finished plywood. The top I just put on a 1x8 peice of finished pine.

    • @mireyaconroy6412
      @mireyaconroy6412 2 ปีที่แล้ว +1

      can you do a video on this? 🤗@@IllGetMyTools

  • @McCarthyism_by_Youtube
    @McCarthyism_by_Youtube หลายเดือนก่อน +2

    should have restricted movement with some sort of bracing. not all customers are 105 lbs.
    this will leak with daily use.

    • @IllGetMyTools
      @IllGetMyTools  หลายเดือนก่อน +1

      @@McCarthyism_by_TH-cam maybe your right I installed them 3 years ago and no leaks…..

  • @TwinOnDaMove
    @TwinOnDaMove 3 หลายเดือนก่อน +1

    how did the salon chairs hold up after 4 years now.? i want to buy one

    • @IllGetMyTools
      @IllGetMyTools  3 หลายเดือนก่อน

      Still doing just fine. Only problem is if color gets on them it might stain the chair so make sure you’re careful.

  • @sinangelematsebula2144
    @sinangelematsebula2144 2 ปีที่แล้ว

    I need this sink

  • @louishollandjr
    @louishollandjr 4 ปีที่แล้ว +1

    Chairs Assembly Video will bring more Subscribers .

    • @IllGetMyTools
      @IllGetMyTools  4 ปีที่แล้ว

      It was pretty basic I didn’t think of recording it

  • @Tracks777
    @Tracks777 4 ปีที่แล้ว +2

    nice video

    • @reecedarwin7956
      @reecedarwin7956 3 ปีที่แล้ว

      i know it's kinda off topic but do anybody know a good site to watch new series online ?

    • @reedmohammed40
      @reedmohammed40 3 ปีที่แล้ว

      @Reece Darwin Flixportal xD

    • @reecedarwin7956
      @reecedarwin7956 3 ปีที่แล้ว

      @Reed Mohammed thanks, I went there and it seems to work :D Appreciate it!

    • @reedmohammed40
      @reedmohammed40 3 ปีที่แล้ว

      @Reece Darwin Happy to help :)

  • @steveperez2427
    @steveperez2427 3 ปีที่แล้ว +1

    You have brand new PEX connections for your water supply lines. Why didnt you use 5/8 angle stops? An extra hose is an extra leak liability and if you are installing multiple chairs its not cost effective. You dont use Teflon Tape on water supply lines the rubber cone insert is what seals the connection when squeezed. Teflon hinders the nut from grabbing thread to squeeze the rubber cone for a direct connection.

    • @IllGetMyTools
      @IllGetMyTools  3 ปีที่แล้ว +1

      You are right, I’m just a carpenter building out a salon for my lady by myself, definitely not a plumber, so thanks.

  • @Brandnewtrophy
    @Brandnewtrophy ปีที่แล้ว +1

    I can count on you

  • @topps2263
    @topps2263 3 ปีที่แล้ว +1

    Do you have a video on how you brought the plumbing out and tapped into the water source?

    • @IllGetMyTools
      @IllGetMyTools  3 ปีที่แล้ว +1

      I had a plumber set up the trap for me, it was an unorthodox setup so we figured out what would work best. Sometimes you have to call in the pros to eliminate future problems.

    • @topps2263
      @topps2263 3 ปีที่แล้ว

      @@IllGetMyTools sound good, I have to do a similar setup for my wife’s salon. I’ll be calling a plumber as well. Thanks for responding..

    • @topps2263
      @topps2263 3 ปีที่แล้ว +1

      Are you a first responder sir?

    • @IllGetMyTools
      @IllGetMyTools  3 ปีที่แล้ว

      @@topps2263 yes I’m a firefighter in Connecticut’s capital city.

    • @holmesssss
      @holmesssss 3 ปีที่แล้ว

      @@topps2263 Good evening sir, did you ever figure out the plumbing for your wife salon.

  • @cynthiabanks7247
    @cynthiabanks7247 3 ปีที่แล้ว +2

    What is the name brand of that shampoo chair?

    • @IllGetMyTools
      @IllGetMyTools  3 ปีที่แล้ว

      Cynthia Banks we purchased them from Minerva beauty. Don’t remember the actual model though. Check out their website

    • @cynthiabanks7247
      @cynthiabanks7247 3 ปีที่แล้ว +1

      @@IllGetMyTools OK THANK YOU. I saw that one, wanted to make sure it was the right one. Color looked a little different. Probably lighting.

  • @louishollandjr
    @louishollandjr 4 ปีที่แล้ว +1

    Most folks get Frustrated with Kia like Projects. For me kind of easy I put together lots.

  • @monbre2529
    @monbre2529 ปีที่แล้ว

    Thanks!

  • @monicamonica1197
    @monicamonica1197 10 หลายเดือนก่อน +1

    Where can I get a second on shampoo chair

    • @IllGetMyTools
      @IllGetMyTools  10 หลายเดือนก่อน

      Not sure what youre asking

  • @louishollandjr
    @louishollandjr 4 ปีที่แล้ว +1

    You Have video's on Plumbing installation is thier Hair traps?

    • @IllGetMyTools
      @IllGetMyTools  4 ปีที่แล้ว +1

      Louis Barksdale ours came with a drop in strainer that sits in the sink you pull it out whenever it needs to be cleaned

  • @ronmcallister7054
    @ronmcallister7054 3 ปีที่แล้ว

    Where did you get the flex line for the dvw?

  • @whiterabbit3382
    @whiterabbit3382 3 ปีที่แล้ว +1

    How do you install the vacuum breaker?

  • @kmac2014
    @kmac2014 3 ปีที่แล้ว

    “You People”? You plumbers👍🏻

  • @josephpuchel6497
    @josephpuchel6497 4 ปีที่แล้ว +1

    Hey Nice video. What about hair trap.

    • @IllGetMyTools
      @IllGetMyTools  4 ปีที่แล้ว +1

      joseph puchel the sinks come with a removable trap in the drain. I could have also installed a secondary one prior to the main drains into the building.

  • @ApostleNateAlston
    @ApostleNateAlston 4 ปีที่แล้ว +1

    Where would you get the brass fitting from?

    • @IllGetMyTools
      @IllGetMyTools  4 ปีที่แล้ว

      Nate Alston from a plumbing supply house. It’s a flex pipe to drain adapter. Tell them it’s for a salon wash bowl they’ll understand.

    • @ApostleNateAlston
      @ApostleNateAlston 4 ปีที่แล้ว

      Thanks a lot!!!

    • @ApostleNateAlston
      @ApostleNateAlston 4 ปีที่แล้ว +1

      I’ve been to all the stores no one knows what the hell I’m talking about

    • @IllGetMyTools
      @IllGetMyTools  4 ปีที่แล้ว

      Nate Alston tell them you need a barbed brass hose fitting. Get whatever size for your application. Like I said Lowe’s and HD may not have these. Need to go to a plumbing store.

    • @ApostleNateAlston
      @ApostleNateAlston 4 ปีที่แล้ว

      I called the place dirsalon furniture where I brought it from Keller4salon and went to every plumbing supply store they don’t know what I’m talking I’m even showing them the video🤦🏾‍♂️🤦🏾‍♂️

  • @fredericmorris4193
    @fredericmorris4193 2 ปีที่แล้ว

    Do you hire out?

  • @michaelbrennan5433
    @michaelbrennan5433 2 ปีที่แล้ว

    Could have prepped the sink before installing on base. Could be hair trap in basement? Also don't need teflon on compression fittings, hence "compression". Liquid teflon make the nut and thread smoother. Afraid of crushing nipple thread, use a shoulder nipple. Use "scissor" method for tightening fittings , 1/4 turn shut off valves are awful. Should of taken spray head off before running water for possible debris in water piping. Really don't think this mechanic is a plumber

  • @leslieduh106
    @leslieduh106 6 หลายเดือนก่อน

    Do you have any advice on how to make the water pressure better with the system ? I added the eco head and I notice the water doesn’t come thru as well as my sink it’s connected to.

  • @leslieduh106
    @leslieduh106 6 หลายเดือนก่อน

    Do you have any advice on how to make the water pressure better with the system ? I added the eco head and I notice the water doesn’t come thru as well as my sink it’s connected to.

  • @leslieduh106
    @leslieduh106 6 หลายเดือนก่อน +1

    Do you have any advice on how to make the water pressure better with the system ? I added the eco head and I notice the water doesn’t come thru as well as my sink it’s connected to.

    • @IllGetMyTools
      @IllGetMyTools  6 หลายเดือนก่อน

      We kept all the heads and hoses as what came in the box. Anytime you change something or have that eco head I’m sure that’s where the issue is coming from.

  • @leslieduh106
    @leslieduh106 6 หลายเดือนก่อน

    Do you have any advice on how to make the water pressure better with the system ? I added the eco head and I notice the water doesn’t come thru as well as my sink it’s connected to.