[04] RuiDa Controller - RD Works - Setting Layer Parameter & Parameter Library

In this video tutorial for RuiDa RD Works we will look at the basic functions of setting Layer Parameters, and How to organize them in the order. You wish to process them on your Co2 Laser.
We will also look at the Parameter Library, and demonstrate how to use it to create a library of your own cutting parameters that you can use on any future laser work job.
MW Laser Membership and Support - Now Available at www.buymeacoff...
How to modify cutting properties
How to apply the parameters in the layer parameter library
I do not be provide cutting parameters in this video for different materials. The settings I am using to demonstrate are what I commonly use for 3mm Plyboard and MDF on my 90W Laser Machine. In a future video I aim to demonstrate a few methods I use to determine the best cutting parameters for various materials.
I Use Fonts for Personal and Commercial Use From Creative Fabrica
www.creativefa...
Thanks for Visiting.
Until next time, take care
Cheers Matthew
Visit Matt's Workshop at MW Laser www.mwlaser.co...
Instagram / mattsworkshop_mwlaser
/ mwlaser
== If you'd like to support my channel financially so I can continue to produce content you can do via PayPal here -- www.paypal.me/... -- Thank You ====
Any questions please feel free to email me [e-mail] or leave a comment below.
NOTE: This is not a paid production or advertisement. The featured Tutorial was requested by Cloudray & RuiDa

[@primetime0104]

Wealth of information, each of these series of videos. Very resourceful. Thank you.

[@cpw80]

Always a good day when there’s another MWLaser video on TH-cam 👍🏻👍🏻

[@MWLaser]

Thank you. I appreciate your feedback. They are time consuming to put together, and it is good to hear that they're appreciated 😊

[@cpw80]

MW Laser you’re very welcome Matt, I have honestly learnt so much from your videos and I’d be totally lost without them, also appreciate the help you have given me over Messenger. Cheers Clinton

[@Jaidevbhoomiukwale]

I was cutting today and the power went out. I was able to start over from original position but that meant the laser had to go over previously cut. Is there a way to restart it at a certain point? I'm using RDC6445G

[@sork9650]

Great work mate !

[@qalooon]

Simple but great explanation... Great video .. Thanks Matt

[@MWLaser]

Thanks

[@f.shhaha]

Hi dear, thank you so much for all your videos, can you tell me how to change the setup on the controller on display from the mm to inches, please?
Thanks again

[@premavathyganesh2609]

Thank you very much for your video... very clear explanation sir

[@MWLaser]

You are most welcome

[@HebrewofHebrews]

So my machine is not cutting according to layer but process number. Ive looked every where and can't find where to change process at. Do you have a thought?

[@jirkalukas1995]

Hello, have you found solution? I have same problem.

[@HebrewofHebrews]

@@jirkalukas1995 I found a partial solvent. There’s a cut property button. Check box order by layers.

[@jirkalukas1995]

@@HebrewofHebrews yeah found it too, some guy on TH-cam also made tutorial but highlighted this check up. It is really hidden though 😁

[@HebrewofHebrews]

Awesome we did it

[@MWLaser]

Glad you found a solution. Sorry for the delay in reply, I have been out of action and moving premises. I will be back soon with more video content. Cheers Matt

[@MrRenoman2011]

Thank you great video

[@juanmaclik5391]

Hello, I wanted to ask you if the program has the frame function (the one that makes the route of the RUIDA controller button) excellent video

[@MWLaser]

Yes, it is in the "Laser Work" window Button Labelled "GO SCALE" - after pressing button enter the speed you wish the "frame" to move. Cheers Matt

[@p.ashwathnarayana9521]

Any video regards price reveal above building your own laser machine. ..like separate video shows all the components and materials actual cost..just to compare the risk and the benifits. To observe the reality between buying and building ...thanks.

[@MWLaser]

No video only document at this address mwlaser.com.au/diy-laser-build-cost-estimation/

[@dinusha2007]

hi, appreciate if you could help me. i have imported a drawing (dxf) from autocad to RD works but the lines which are assigned to engrave, does not engrave or show in the preview. pls help

[@MWLaser]

this is not something I can assist with via youtube comments. email info to [e-mail]

[@robbie77300]

Sometimes if the items are a group, exploding them might make them appear when imported to RD works. I notice when an array is drawn in Autocad for example, the group of items that is output, wont appear unless exploded.

[@shawndraparker2501]

Can u help me? My radiator control panel is stuck on engraving a file and will not accept anything else. It always says is busy or paused. Hope u can help me

[@MWLaser]

I can try to help, send more details to email [e-mail]

[@HenryKillian]

How would you get the laser head to return to it's starting position? Origin

[@MWLaser]

in RD works - check USER Tab menu - OTHER - RETURN PARAMETER

[@lucasbaptistella9716]

I really like your videos, I am straggling with layers, I m trying to do grayscale with 100 small shapes to engrave with different speed and power, but I cant because there are more than 20 colors I have. Any solution please? Anyone.

[@MWLaser]

not sure what your doing here, but if you require more layers than RD Works Has - Try LightBurn Software it has about 29 layer options

[@johnchase7667]

How can I automatically pause between layers so I can swap out wood?

[@MWLaser]

sorry I don't understand the question [e-mail]

[@lawrieyates1104]

Hi, I was just wondering how you'd change the workspace from being 900mm wide etc?

[@MWLaser]

This is set in Vendor Tools, for each axis the size is entered in the "Breadth" Field

[@bowenlennon178]

I know it's pretty randomly asking but does anybody know of a good website to stream newly released tv shows online?

[@maximilianoaarav2178]

@Bowen Lennon Flixportal :P

[@bowenlennon178]

@Maximiliano Aarav Thank you, signed up and it seems like they got a lot of movies there :) Appreciate it !

[@maximilianoaarav2178]

@Bowen Lennon glad I could help =)

[@mariacarilaf6031]

how do you completely remove a layer ?

[@MWLaser]

layers will only appear in the layers list if they are assigned to an object on the work area