How To Make A Beeswax & Oil Furniture Polish For Wood Finishing
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- In this video I make my own home-made wood finishing oil - wax finish - also known as paste wax, furniture polish or beeswax polish.
Buy it here: Double Pack: www.etsy.com/u... Original: www.etsy.com/u... Food Safe: www.etsy.com/u...
Ingredients (Amazon Links):
Beeswax Pellets 200g geni.us/eVBA3b 500g geni.us/tIMdC6 1kg geni.us/K12aLpi
Beeswax Blocks (Amazon) 150g geni.us/DRZaxc 1kg geni.us/rILm2
Boiled Linseed Oil 500ml (Amazon) geni.us/Iphiyze 1l geni.us/sKzKlf 2l geni.us/ZbFFu 5l geni.us/NNI3Q1r
White Spirit 750ml (Amazon) geni.us/ip2UftF 2l geni.us/Jghg0GR 5l geni.us/CA1U
Mineral Oil 500ml (Amazon) geni.us/IWFs 1l geni.us/uHT8Fzc or geni.us/X1bgKm 5l geni.us/akNykf
Glass jars 6 quantity (Amazon) geni.us/Jobmz 24 quantity geni.us/YwrE 60 quantity geni.us/4cN4d 72 quantity geni.us/NztzO
Ingredients (US Links):
Beeswax Pellets 1lb (Amazon) geni.us/LlYw 2lb geni.us/0NqUUP
Beeswax Blocks 6oz (Amazon) geni.us/e7IS6
Boiled Linseed Oil 1 pint (Amazon) geni.us/upm3b 1 quart geni.us/Gq1z 1 gallon geni.us/PeZC
Mineral Oil 16oz (Amazon) geni.us/DrB2i 32oz geni.us/qJcnQ9 1 gallon geni.us/xzk0ZI
Glass jars 12 quantity (Amazon) geni.us/alNfec 24 quantity geni.us/YpXc 72 quantity geni.us/E71yzE
Thanks for watching! Please subscribe!
HELP SUPPORT THE CHANNEL:
Support with TH-cam channel membership: / @ragnbonebrown
Support with Patreon: / ragnbonebrown
Support with PayPal paypal.me/ragnb...
MY TOOLS:
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn from qualifying purchases.
UK affiliate store: www.amazon.co....
US affiliate store: www.amazon.com...
SHOP:
Etsy: www.etsy.com/uk...
teespring.com/...
LINKS:
Website: www.ragnbonebro...
Facebook: / ragnbonebrown
Instagram: @ragnbonebrown
Twitter: / ragnbonebrown
Email: ragnbonebrown@gmail.com
Second TH-cam Channel (non woodwork videos): / keefykeef
Tip: Don't add the hot beeswax to the white spirits and boiled Linseed oil. Do it the other way around. Remove the Melted beeswax from the heat source, and slowly add the two ingredients to the melted wax. It won't clump up the way it did in the video and make a mess, and it will give up ample time to stir the liquid making sure all ingredients are incorporated well. Once all ingredients are thoroughly mixed, pour the liquid into glass jars, and sit aside to cool.
I seriously fired up my Mac again after seeing this vid earlier today, to comment exactly this
Or, better yet... just weigh it all out and melt it all together, then pour into the jars. Lol
@@CloudfeatherRusticWorksthats a fire risk.. the linseed and turps aren’t stable whilst heated 🤨
@@Ionabrodie69 they don't get anywhere near hot enough to be combustible.
Unless you're a total idiot and have your stove top flame super high. Lol
vaseline and wax (bee or parafin) heat together pour in jars. You can thin with thinner of choice.
Keith, i made my own afew years ago, i found putting bees wax and the other ingredients in the jars then putting the jars in the boiling water pan works better and no unnecessary pouring either.
You prolly dont give a damn but does someone know a method to log back into an Instagram account??
I stupidly lost the login password. I would appreciate any tricks you can offer me.
@Ernesto Marcos Instablaster ;)
I concur. You get a better mix (I use pure gum Turpentine + Linseed + Carnauba wax but principle is the same) with no ugly lumps of wax - it sets smooth/even.
@@ernestomarcos11 You go to Instagram login screen and click on (or poke) the 'forgot password' button.
Weird place for asking.
@@ernestomarcos11 Did you get in?
Good source of mineral oil that is cheap for you, Horse laxative, it's pure food grade mineral oil and very cheap in bulk. You can also buy raw linseed oil for horse feed too, food grade again and pure. Both are safe for human consumption.
You shouldn’t use raw linseed oil on your fine wood finishes, boiled is infinitely preferable! I believe bugs are highly attracted to the raw.
@@catofthecastle1681 You don't want to use boiled on anything where food will be prepared though.
Great video Keith. I've made lots of my own food safe wax and if you heat up the mineral oil then melt the beeswax into it, you will get a perfect blend and no need for furious mixing if you add the hot beeswax to the cold mineral oil.
I was gonna say that too, just 3 years too late. LOL
I made mine by mixing the wax and oils in the heated sauce pan, seems to mix more thoroughly that way...
Hack for you - put jars into hot water bath, melt wax in jars, then just add the oil = no mess, no rapid setting, can make small quantities :)
Nice one! Love making my own finishes.
Another finish for *non food* use is half and half wax with wood turpentine. Smells amazing, in an olde wood polish way.
Best of all, no heat is needed, just shred your wax into the turps in the jar, leave it on the window ledge for a few days, shaking to mix now and then and Bob's your uncle.
Just the informative straight talking video on this subject I was looking for so a thumbs up and thanks.
Your quote at 0:54 - "Finally, I just like making things" raised a smile and got the subscribe button pressed.
Are you still here lol
I added the oil to the melted bees wax in the pan and heated it all up, it mixed well and easy to pour in to the jar all mixed, worked a treat.
Honestly, that third motivation is the best one.
Making stuff rules, if it's practical and helps life along in the process even better. Great video dude, really appreciate you sharing it.
for sure jars in the warm water is a great idea. i use a 'candy stove' or a turkey frying stove with 2 stock pots that fit inside each other, as a bain marie would, to melt/mix and pour from. holding the jars in a warm oven will help keep the jar filling warm to warm and not so rushed to stir/blend. thanks for sharing your technique...always quality content.
Preheating the oil so that the beeswax doesn't solidify and mixing is easier might be the way to go for the future. Also mixing your ingredients in a larger vessel before pouring into the jars might be beneficial. Thanks for the upload Keith.
One of the first things I was thought as a bee keeper was to not use use warm water when cleaning wax, it must be cold. If the water is warm it softens the wax and it becomes sticky.
To prevent drips going all over, use a jam funnel - they are specifically designed for filling jam jars with hot sticky adhesive goo and not spilling any.
Warm iron over doubled up paper towels to get rid of wax on surfaces, works very well on hard and soft surfaces.
Fantastic, great job. I make mine as well to replace feed'n'wax. I use an electric hotplate outside with a glass bowl in the double boiler. I also use a little orange oil in there.
When I make abrasive paste for woodturning. I put the mineral oil and wax and mix them together as the wax melts. Then you can pour straight into your containers to cool Just scale up the mixture, obviously.
This will probably make it more worth your time.
Peter, what do you use as the abrasive?
Bought a pound of flaxseed at the store $1.69 Canadian, going to extract the oil myself and mix it with beeswax I’m going to be grabbing from a local fellow who has a bunch of hives. Making some that’s food safe and a batch for tool handles and other projects. Great looking paste you made.
Thank you for sharing the learning process, it's what I love most about your videos, you "keep it real".
I made something similar the other day, but for boots. I discounted the beeswax pellets on cost. Lumps of beeswax is cheaper, i just cut up the wax into chunks rather that little bits like you. It just takes a bit longer to melt that is all. I shall be trying some of this for my knife handles. :)
Hi Keith,another very good and informative vidio,with your usual 100% honesty,it is amazing how many people will buy off the shelf product's that are easily self made,so hopefully you will sell all you make,take care and be happy
Great video Keith. Very generous of you to share the method, recipe and all the links. I'll be ordering some up when I run out of Briwax.
I use wood turpentine instead of white spirit (mineral turpentine). It doesn't smell bad, and the final product has got an amazing scent.
I don't stir the wax after pouring, I re-heat the mixture in the glass jar.
I've been making this in my stone oven at about 70 deg celsius and leave it in for hours. It's warm from heating my house.
Like making things too. Just finished a bunch of tins of shoe polish & mirror finish shoe polish for dress shoes. This is next. Heres a great exterior wood finish that works really well: 33% pure gum spirits turpentine, 33% boiled linseed oil, 33% melted wax mixture. (Wax mix is 2 tbsp carnauba to 1 qt of pelletized beeswax). Add about 5 drops of pure orange oil to every 300 mls of mix at time of dispensing into jars. You can gently warm jars in a hot water bath or in a low oven.
hi Keith
I love the look of the jars, they look really professional !
I made some for chopping boards as I make quite blot of them, the cheapest I could find mineral oil in the UK was un -scented baby oil from asda. about quarter the price of the stuff marketed as chopping board oil.
Be careful with baby oil as it might not be food safe, even un scented. The cheapest I found was a seller on Amazon and ebay called Lincs products. A 1L bottle cost £7.99, which is like half the price of the chopping board specific oils that are £8 for 500ml or some even more than that. If you get 5L the price drops to like £5 a litre, which isn't bad at all. You can buy all the way up to a 200 L drum lol. If you have any mates that might be interested in some, then buying a lot and then sharing it out would be a great way of doing it.
For beeswax I found it fairly difficult to find food safe beeswax. I ended up getting it from a site called the London Bee company. They offer 100g for £2 odd and their delivery is only £1 for small orders. I ordered 200g, which should make enough cutting board wax for a year or more.
Hi Keith, I like your videos, especially because you summarise your lessons learned - extremely valuable for beginners like me !
I went to my local second-hand store and purchased an old crockpot I put my ingredients in all at once and turn it on to medium-high until melted. Since glass is tricky to ship & requires bubble wrap, I used screwtop tins. Just an idea. ;>)
I do that too now! 👍
I melt the wax and mix the oil in with it. Use a crockpot/ slow cooker. The wax just needs to melt not boil. Then pour into containers. It works for me.
I know this video is 3 years old now, but this comment might help people who have just found this video.
I use an old slow cooker/crock pot that I bought from a charity shop for a tenner to make my waxes in.
I melt the wax first, then add the other ingredients until they're thoroughly mixed, then I put the wax into containers.
Keeping it on low is also handy for keeping the wax liquid while I use it to reproof wax cotton jackets or waterproof my bike leathers.
Fill a baking dish with hot water, put the jars in that, then add the oil, spirits, and beeswax. That'll keep everything warm and loose. Before using I'd recommend reheating the mixture with hot water until the beeswax melts. It makes it a lot easier to apply and is really good for your hands. :-D
You are so humble and so down to Earth ❤️
Flax seed oil is the same oil as linseed, just more refined to reduce the impurities in it. You could use that as the base for the food safe version as well. Just a bit more expensive than the cheap linseed though. Mixing the oils and wax in the pot though will help, though you will want to leave the spirits out till it has been mixed and cooled down, then add the spirits to the cool mix and use elbow grease, then fill the jars.
If you are going to make larger batches find a well used commercial mixing unit with bowl, and use that instead, as it makes short work of the mixing. Plastic spatulas then to put it in the jars, and have them in a big baking tray with enough hot water around them to make the wax soft and pliable, plus the hot mix will also pull the caps in making a good seal when tight.
Thanks Sean.
TractorSupply.com Flax seed oil $21/gallon!
If you melt the wax, than mix white spirit and oil ... and pour it gently into the hot wax while stirring , it will be easier to get an even consistens. ...and you can avoid a lot off mess. I just tested it out and it worked fine.
Add 1 oz of Pure orange oil to ea jar. It will soften & aid mixing, help penetrate & preserve wood, smell good & resist pests & mold/rot. For nonfood version.
I didn't know what to think when you talked about maybe renaming the channel: I eventually accepted that it seemed reasonable. But I'm going going to have a heck of a time recognizing this place if you stop using your dad's old tin of briwax…
The packaging looks great. Thanks for sharing the recipe!
Nice work! One thing I think would be worth mentioning is the type of the jars, they might be too narrow to reach the end. A wide tub might be easier to use.
They passed the “two finger” test so should be ok, but a great point
My tip is to get a cheap slow cooker for melting the wax. Also mix everything together before adding it to the jars
thats what a local distillery is using to dip the bottle lids/top into ;)
Thanks for this video.
Appreciate you giving the recipe.
Like the wooden Play button on the back shelf.
Thanks again.
Get a canning funnel. They have a bottom that's just smaller than a home canning jar and a wider top. They sell them on Amazon or anywhere that sells home canning supplies. It should help with the mess. Just make sure it will fit your jars. They're made to fit Mason jars.
a stick blender might be a good investment, for thorough mixing of the wood finish.
Grand master J with the bees wax blaster poppin that grain cuz he knows he hasta.
suggestion...use wax paper on the surface so u can protect it and easy to clean up..thank you for sharing the recipe....
What a great tutorial @Rag 'n' Bone Brown! We've been looking for alternatives for finishing wood as we are in the midst of a massive Skoolie build. We're definitely going to try out your recipe for making this beeswax finish. Thanks dude!
- Brian + Erin
Currently converting an old school bus into a Skoolie motorhome
Put the jars with wax in the water then add the oil and or mineral spirits in the wax in the jars. Let the wax melt back then mix. You don't make a mess with the wax and you can turn pot off and let everything cool in the water. When cooled put on the tops and remove from the pot. No mess, no ruined pots, and you can be more productive with multiple pots.
You can microwave the mix so long as the metal cap is off the glass jar then mix more throughly.
Warm up the Jar's in hot water before filling...
Nice idea!
I was just about to suggest this
And have a second small pot or bowl of warm water, just big enough for a jar, so after you fill a jar you can set it in the warm water until thoroughly mixed. If it is inclined to try to 'unmix' you could then lift out and mix another minute or so as it cools. Also, maybe find shorter, wider jars? Great idea job though!
You don't have to mix the stuff once you've heated the wax. You can leave it for a week or two and it'll merge anyway. In fact if you're really lazy just put the 3 ingredients in the jar (without heating the wax, but using pellets) and leave it in your house for a month. Zero effort. I use wide Kilner style jars and this method because I'm exceptionally lazy.
When I make paste wax, whether it's food-safe or not, I use a crock pot that came from a thrift shop to melt the wax and add the other ingredients. You probably have a different name for crock pots in the UK.
I would have thought using a large pot or some such to heat the oil gently before adding the how wax, mix well and then poor or portion out into jars. That way all the jars have the same mix and you would get much less mess. Good vid btw, thinking of making some of this for myself!
Use boiling water to clean out the pots with wax in then. I’ve done this with candles plenty of times to save the jars once the candle is done
Great to see you back!
In a 'bain marie' the food is cooked in the boiling water. The container is immersed IN the water. In a double boiler - what you did - the food is cooked by its own liquid (i.e. a sauce) being suspended over the boiling water. (Sorry, I''m being a pain in the arse...)
My sister in law makes candles by melting beeswax in an old, dirt cheap microwave. She uses old tupperware boxes and when the residual wax solidifies she can just peel it out of the box and add it to her next batch. I don't know if that would work for this application but I think it's worth a try.
Brilliant !! trying it tomorrow 👍🏼👍🏼👍🏼👍🏼
I use walnut oil and beeswax for my turning work and kitchen implements. food safe.
use an old metal coffee can or soup can to melt the wax. That way you don't have a mess to clean up and the wax you don't use will be stored in the can
Awesome, usually referred to as a double boiler and it's best to use a metal bowl big enough to sit on top of the pot with water in it and only fill the water about a 3rd of the way and bring to a heavy simmer. But great vid, loved it
Glass jar in the work shop would be a no go for me. Plus, more likely to cause shipping problems for you. Metal tins would be preferable.
I use beeswax and olive oil ( 4 parts oil and one part beeswax ) I melt them in a bin marie , but i put the jars in the pot ( with the amount of wax nd oil that i want ) for more convinience and you dont have a mess and not need to buy an extra pot . ,
I just did this same process the other day, except I used walnut oil instead. worked well!
Olive oil will go rancid after awhile so you’ll have to use it up in a month or so.
Thanks for the info i didnt know !!!
Cut the tops of several Vitamin E capsules and add the Vit. E to your organic oils. It will prevent them from going rancid for quite a while. Cheap and available. Probably any anti-oxident will work.@@user-oy4gf6ck5u
It is beter to mix everything in the heated pan than adding the hot wax to cold ingredients.
1 they mix better
2 it's easier to fill your pots
3 you won't have spilled materials when you mix in the jars instead of the pot
Use an old fry baby- its melts it extremly fast and once it dries you can leave it in its solid state and it pops out easily
Wise words on the cheese grater 😂😂😂
Use an induction plate for heating...it’s what I use for my medicinal canabinoid preparations too.
I think some of my pomade is food grade wood wax. Lol. Now I got to pay attention to the labels lol
Great video my friend.
If you can source an old metal non-electric coffee pot, you can use it as a Ban Marie, and it comes with a spout. Come to think of it, you could get a pyrex measuring cup (just remember they are no longer made with tempered glass) or an old glass coffee urn. The Pyrex could be microwaved briefly to melt any left over wax clinging to the sides (the urn might have metal). You wipe the wax off with a paper towel.
Do you think it's possible to use pure, unboiled Linseed oil?
I put a cloth around a bag with block of Bees wax and take a hammer to it works fast breaks it up in to small pieces.
Just ordered myself some, I look forward to trying it out
Thank you!
Now that's the white spirit! :D
Also, maybe a low profile tin would be better for accessing the wax than a jar. 😀
Very educative bro
Looks like a good idea, mate 👍
Wish you well on your endeavors to sell these products. 👌
this is like watching the woodwork version of pure living for life...
Finally something to cheer me up after Wednesdays loss.
Roll on Qatar
I do mine with turpentine and add few drops of cedarwood or lavender essential oil, using stainless steel saucepan and everything get cleaned thoroughly in the dish washer. 😉
Frenchie Dekent is turpentine food safe ?
Dave Williams 😊, no that is for my old french buffet and dinner table ect... but for my kitchen work top I prefer Tung oil 😉
Loved the video the wax looks great
My wife makes jam and she puts the jars in the oven to kill germs. As long as you don't hit the flashpoint for the spirit you should be fine 😉
Lol well done but in a bain marie the pot is not meant to touch the water. Next time, add the oil slowly once the wax is melted, keeping it over the heat to mix them together.
Mix the ingredients in the double boiler instead of in the jar...
Hi, Just received the 2 pots of finish I ordered from you , this is not the place I should be noting this but I have just opened them and my girlfriend tells me they small lovely (I lost my sense of smell as the result of an accident) anyway I just wanted to thank you for the speedy delivery.
Thank you!
First edition Nomad-Wax just completed :D Now to test it out! Cheers.
Yay! 👍
I have done the sane but without white spirit and i have put all together in a pan outside on a gas burner for safety reasons ;-)
If you warm up the oil as well it would be easier to mix isn’t?
thanks for the info. i would buy one to support you but New Zealand has tight restrictions on bringing in natural products. so i think i might have a go at making some
Why can't you mix it all in the pan together. Because of the flame maybe?. I think an induction hob might be a good option for this ?
Getting in trouble with the lady 😂
Valentine's is coming up, get the Lady a new Cheesegrater !!
I really hope you do well with the waxes. I’ll have to have a look at them great video Keith
Thank you!
Thankyou for sharing
If you fail at mixing te ingredients together thoroughly, put te jars in some WARM water and let them sit for a few ours.
Great video...👍👍👍
i suggest using disposable aluminum tray to melt the wax
Greeat video👌. IDK why you have any thumbs down? 😂 I will try making some though! See how it goes. Thanks for all the tips!
Love it! Thanks mate
Ta, I made my own too, having said that I don’t believe anything with mineral oil is food safe, contrary to popular belief!
Thanks for the video.
Guess you could try lining the Bain Marie with greaseproof paper to save your vessel.
I just ordered one of each and a leather strop. :-)
Thank you so much ! Will post after 18th as requested 👍
Rag 'n' Bone Brown No. Thank YOU for keeping me entertained every Friday with your excellent channel. I will shortly be setting up my first proper workshop in my new 1 car garage. Can't wait.
What can I add to it in order to achieve a darker wood colour? Always a natural solution please with no harsh chemicals.
May i suggest that heating the oil and spirit before adding the molten wax would make mixing a lot easier? And make a large batch which can then be decanted into the jars? Also a single label which has all the necessary info on it?
Don't bother with the mixing with the dowel, just add your ingredients, lightly cap the lid and place back into a pot of water on a very low simmer ;)
thank you so much for sharing knowledge....