Though I appreciate the video it didn't help show the repair. Where is this motor in the vehicle? Where are those gears with the metal shavings located. How do you remove them?
Hi. I would like to know how to recalibrate a panorama from an audi q5. After I disassembled it to replace the curtain, it does not close properly, and remains partially open. I would like to know if and how it is done with vcds .Thanks
This is a reminder to myself and anyone else for the future that the sunroof and sunroof-shade adaptation calibrations are carried out separately and do not require the use of VCDS, though obviously VCDS can be used to confirm success (faults will reset and remain clear). Commencing with sunroof and sunshade in closed position:- To calibrate sunroof pull down the sunroof switch and keep holding it down until after the sunroof opens and then closes again. To calibrate the sunroof sun-shade push the sunshade button all the way forward and hold in this position until after the sunshade has opened and then closed. Calibration is now complete and no other action is required. Be aware to keep hands and fingers clear of moving parts whilst calibration is taking place.
Hi the back of my rail just won’t go down on the left side. What could that be?
Though I appreciate the video it didn't help show the repair. Where is this motor in the vehicle? Where are those gears with the metal shavings located. How do you remove them?
There are 3 videos for this repair
Hi, how did you took the whole rail off? Thx
Hi. I would like to know how to recalibrate a panorama from an audi q5. After I disassembled it to replace the curtain, it does not close properly, and remains partially open. I would like to know if and how it is done with vcds .Thanks
This is a reminder to myself and anyone else for the future that the sunroof and sunroof-shade adaptation calibrations are carried out separately and do not require the use of VCDS, though obviously VCDS can be used to confirm success (faults will reset and remain clear).
Commencing with sunroof and sunshade in closed position:-
To calibrate sunroof pull down the sunroof switch and keep holding it down until after the sunroof opens and then closes again.
To calibrate the sunroof sun-shade push the sunshade button all the way forward and hold in this position until after the sunshade has opened and then closed.
Calibration is now complete and no other action is required. Be aware to keep hands and fingers clear of moving parts whilst calibration is taking place.
I have the same problem on passat b7 2011 and i fix it. Thanks