You removed the keyboard the wrong way. That's why it seemed difficult. Correct way is to release the tabs of the keyboard, located in the battery bay. The keyboard just pops open.
Great video and exactly what I needed to do the job without any screws left over :>) thanks Note: In the lower left of the motherboard is a chip with a silicon? sponge/heat transfer pad and an associated stainless steel pressure clip fastened to the chassis. Not sure of the exact function but this soft pad should be replaced if damaged during disassembly?
I disassembled my laptop and it is quite straight forward following this video. However when disconnecting the internal connector at 5:45, the female part of the connector broke so I can't reconnect. It is the wiring from the on/off etc. switch. Now I will have to find and solder in a new component I guess.
Claudio Torres Open the 4 screws on the heat sink and one screw of the fan. Gently pull the whole heat sink assembly. Clean the old paste on the processor and heat sink. Apply new paste only on the processor. Reconnect the heat sink assembly.
hi... i have disambled all parts..after that, after i want to turn it on... it remains blank... it does reboot for the first time... the display showed the menu..but after that..it stuck and blank
You removed the keyboard the wrong way. That's why it seemed difficult. Correct way is to release the tabs of the keyboard, located in the battery bay. The keyboard just pops open.
Muchas gracias me ayudo bastante pude reparar mi equipo saludos desde Perú 🇵🇪
q.procesador tienes?
Thanks very much. Do you know how to fix white screen issue with this laptop?
Thank you very much for the video, it helped me on december 2020!
After this video, a re-assembly guide would be useful.
Thanks, it did the job.
Great video and exactly what I needed to do the job without any screws left over :>) thanks
Note: In the lower left of the motherboard is a chip with a silicon? sponge/heat transfer pad and an associated stainless steel pressure clip fastened to the chassis. Not sure of the exact function but this soft pad should be replaced if damaged during disassembly?
Thanks Alot for kind guidance .
NICE, I WANT CLEANING FAN PROCESSOR.. THX
Boss wants to ask what size screwdriver + is used to open the cellphone laptop case
I only use one size of + screwdriver.
Thank you a lot
good, thanks
I have the same laptop of yours, it no reaction when I turn on the unit, there's a light in the AC input. how can I fix it? thank you
Probably related to power regulator, it’s the common yet the most difficult to repair.
El chipset está mal
Cambiarla es riesgoso con máquinas especiales.
Mejor cámbiale de placa madre
I disassembled my laptop and it is quite straight forward following this video. However when disconnecting the internal connector at 5:45, the female part of the connector broke so I can't reconnect. It is the wiring from the on/off etc. switch. Now I will have to find and solder in a new component I guess.
it is broke so hard ? Yes it is a wire for power switch.
RAM specifications plus, ddr4?
It's DDR3 if I'm not mistaken
Can you please tell me the cmos battery mb size for this hp1000 laptop?
This help me a lot. Thanks 👍
Thank you, I did all of this succesfully just to find that the only solution to my problem is to replace the carcass :(
My laptop this model body is broken how to Replace??
Try this th-cam.com/video/2seiAAUDge0/w-d-xo.html
where is the one screw near optical drive?
which one? I don't understand which screw
Awesome
where do i have to put the coolant paste?
Claudio Torres Open the 4 screws on the heat sink and one screw of the fan. Gently pull the whole heat sink assembly. Clean the old paste on the processor and heat sink. Apply new paste only on the processor. Reconnect the heat sink assembly.
Where is.the graphic card ? Can we upgrade the graphic card for this laptop.. please i need an answer..
No you can't
@@LimpingGander thanks man..
hi... i have disambled all parts..after that, after i want to turn it on... it remains blank... it does reboot for the first time... the display showed the menu..but after that..it stuck and blank
It can be several possibility. Can you enter to the bios?
Caddy size please
Es el normal.
No utilize el slim
good job gays
?
Baudnya kuat di pisah pisah haha
Can we use wd-40 for cleaning purpose