4 years later and this video are helping alot of dads out there. I needed this going to do an install so we can travel with more space in the trunk. Thnaks again
Your videos on installing the harness and hitch assembly were much informative and easy to follow than the instructions from Honda. Thanks for creating these videos.
i know Im asking randomly but does someone know of a way to log back into an instagram account?? I somehow lost my account password. I would appreciate any assistance you can offer me.
@Thiago Mitchell Thanks so much for your reply. I got to the site through google and im trying it out atm. Looks like it's gonna take quite some time so I will get back to you later with my results.
Thank you! The Honda installation instructions along with your videos allowed me to properly install the wiring harness and trailer hitch on my 2021 Pilot. No changes from your 2019 instructions.
Appreciate the video - just got my harness and hitch installed after using your videos. For anyone watching, make sure to have a second set of hands for the hitch install if you're using vehicle ramps or jacks, was impossible to get the wiring harness / plug installed to the hitch with the vehicle off the ground.
Nice video, really helped show how much better this OEM one is than other cheaper options. Any other sources don’t show how this OEM one sits in the bumper rather than below. Thanks will be getting these soon.
Thanks Eddie. I too got a faceful of dirt!! If you want to just use the 4 pin flat connector for a lot cheaper, you can slide the connector just under the 8 pin connector cutout. It fits and locks right in.
Eddie, Thanks for this terrific video and narration. It made my installation bearable. Comment on the OEM part: hitch extension is a bit short as I like to place hitch locks on my stuff. E.g., my Yakima bike lock fits on the end of the bolt - tight clearance where the lock and safety chain loops occur. Honda could use another 2" length. Might see steel fabricator to extend...
I had a tough time taking off those push pins on the upper bumper. I used a small flat head and was able to pop them up. Thanks for the video! Also I used jack stands to help hold the hitch.
Wondering if you could share the part numbers for the kick sensor kit. My local dealer is a bit useless when it comes to that. Also the part number for the right side relocation. Thanks!
I am hoping to buy a Passport but cant find any with pre-installed hitches. None! I hate the way the aftermarket ones look. This looks great! Did the valance have to be ordered separately?
Preinstalled hitch at dealers would cost you a lot more than diy. Most people, buyers are not aware of ridiculous fees added to the tally sheet nicely squeezed somewhere in the middle of all numbers on the final paper signature.
I just purchased a new 2019 EX-L and am having my mechanic install. I copied the video links. Are there printed instructions that come with parts. I just ordered Honda Parts
Gary Glenn I think I went to the college Honda website and they have the instructions in pdf form. Really straight forward though. Toughest part is having a second person hold the hitch while you install the bolts.
Thank you for this video! Be sure to test out all the screw holes before mounting. 4 out of 6 bolts were only getting in half way because of rust. Spray some DW40 in and it went in smooth.
when I try to put the bolts in for the hitch, the bolts won't go in more than like a 1/4 inch i cleaned the holes with penetraing oil, and some brushes. and nothing. any idea?
@@cpenv thanks for that. I've been researching for weeks and that seems to be it. I've never tapped like that so I'm looking for something to practice on.
Any chance you could measure the height from the ground to the top innermost part of the hitch receiver tube? I'm seeing it is 14 inches for aftermarket, and hoping the OEM gets me some extra ground clearance.
Hey Ed, I have the 19 Pilot and I'm having a hard time removing the rear panel. I actually watched the video a few times and it doesn't seem as easy as you do it! Lol Any tips?
Hi Ed, I am looking to install a small safe in the large rear cubby area of my 2019 Honda Pilot. Honda schematic did not show what is directly under the cubby box. I am afraid of hitting a wiring harness, etc. Any ideas?
honestly it shold only be the floor but watch out because the spare tire rides directly underneath i have actually drilled straight into it on my first gen pilot
So what kind of weight are you towing and how dose the pilot handle it? I have the 2019 EX-L and I have been meaning to order the hitch to tow my bass boat just wondering if the pilot was good tow vehicle? Thanks for the exilent videos they will be a big help. Sub and liked.
Hey Ed... need some help here... the new plastic cover does NOT fit on pilots with Kick Sensors... any suggestions please? The dealers are all ignorant... they say it fits but 100% sure it will not fit because the (2) long black rod sensors get in the way and the receiver cut-out protrudes the sensors... Help... need suggestions. Thanks
JayCoolKay I am a nurse with a mechanical background. But I never put a car in a shop if I can help it. I do it for you guys so you can keep some of your money
Would full size 20" rim diameter tire fits with this oem trailer hitch? The after market trailer hitch has higher tongue weight, but it states it only fita up to 18" diameter tired. Would you recommend going for third party trailer hitch?
firstalex2 I think the problem your running into is the spare tire size. If you have 20” rims your spare would also be bigger. I personally would only buy the Honda hitch due to the fact that it comes with the replacement bumper panel and just looks way better than the hitch hanging under the bumper. And as a bonus the Honda hitch is probably engineered to fit with all size stock rims. Hope this helps!
Does the OEM hitch come with that rubber Honda hitch cover? I got my hitch installed at the dealer today but no cover was included when I picked it up.
4 years later and this video are helping alot of dads out there. I needed this going to do an install so we can travel with more space in the trunk. Thnaks again
Your welcome!
Your videos on installing the harness and hitch assembly were much informative and easy to follow than the instructions from Honda. Thanks for creating these videos.
i know Im asking randomly but does someone know of a way to log back into an instagram account??
I somehow lost my account password. I would appreciate any assistance you can offer me.
@Kannon Keanu instablaster :)
@Thiago Mitchell Thanks so much for your reply. I got to the site through google and im trying it out atm.
Looks like it's gonna take quite some time so I will get back to you later with my results.
@Thiago Mitchell it worked and I now got access to my account again. I am so happy!
Thanks so much you saved my account!
@Kannon Keanu happy to help :)
Thank you! The Honda installation instructions along with your videos allowed me to properly install the wiring harness and trailer hitch on my 2021 Pilot. No changes from your 2019 instructions.
Thank you for watching and validating the information.
Appreciate the video - just got my harness and hitch installed after using your videos. For anyone watching, make sure to have a second set of hands for the hitch install if you're using vehicle ramps or jacks, was impossible to get the wiring harness / plug installed to the hitch with the vehicle off the ground.
April 2023 and I’m using this videos to install my hitch!! Thank you!!! 🙌🏽
Nice video, really helped show how much better this OEM one is than other cheaper options. Any other sources don’t show how this OEM one sits in the bumper rather than below. Thanks will be getting these soon.
Thanks Eddie. I too got a faceful of dirt!!
If you want to just use the 4 pin flat connector for a lot cheaper, you can slide the connector just under the 8 pin connector cutout. It fits and locks right in.
Do you have a video on how to instal the hands free tailgate adapter or instructions?
Hello Eddie. Is there any chance you could post the parts you used with links in the video description? I'm sure that would be helpful to many.
Eddie, Thanks for this terrific video and narration. It made my installation bearable. Comment on the OEM part: hitch extension is a bit short as I like to place hitch locks on my stuff. E.g., my Yakima bike lock fits on the end of the bolt - tight clearance where the lock and safety chain loops occur. Honda could use another 2" length. Might see steel fabricator to extend...
I had a tough time taking off those push pins on the upper bumper. I used a small flat head and was able to pop them up. Thanks for the video! Also I used jack stands to help hold the hitch.
th-cam.com/video/ZssGBm_ANfk/w-d-xo.html this link goes over how to remove the push pins
Sweet! Way cleaner looking than aftermarket.
Very helpful video. Thanks for putting it together
Thanks or the great video. Made my installation easy
Wondering if you could share the part numbers for the kick sensor kit. My local dealer is a bit useless when it comes to that. Also the part number for the right side relocation. Thanks!
Can you post part number? Ive been looking online and cant find it
I am hoping to buy a Passport but cant find any with pre-installed hitches. None!
I hate the way the aftermarket ones look. This looks great!
Did the valance have to be ordered separately?
truhbf thank you. I’m almost 100% the install would be the same.
@@eddiesspeedgarage thanks for response. I just realized this was on a pilot!!!
truhbf it’s the same truck just shorter and taller. The hitch kit will come with the panel replacement for the bumper.
From what I understand all Honda models come the exact same way to the dealer. All extras or options are added at the dealer.
Preinstalled hitch at dealers would cost you a lot more than diy. Most people, buyers are not aware of ridiculous fees added to the tally sheet nicely squeezed somewhere in the middle of all numbers on the final paper signature.
Nice job 👍🏻
So there's no need to jack the car up for this install? That would make it easier to get away with doing at my apartment complex.
No and it also saves your arms
I just purchased a new 2019 EX-L and am having my mechanic install. I copied the video links. Are there printed instructions that come with parts. I just ordered Honda Parts
Gary Glenn I think I went to the college Honda website and they have the instructions in pdf form. Really straight forward though. Toughest part is having a second person hold the hitch while you install the bolts.
Thank you for this video! Be sure to test out all the screw holes before mounting. 4 out of 6 bolts were only getting in half way because of rust. Spray some DW40 in and it went in smooth.
At the time I filmed the video my pilot was still very new. But thank you for your input I’m sure someone will find it helpful!
Great info! Thank you Eddie!!!!
Hey! Thanks for the video. Going to try and do my own soon. Do you think a full sized spare tire will fit with the hitch? Thanks!
If it’s the same diameter as the spare yes width is irrelevant
where did you get your parts?
when I try to put the bolts in for the hitch, the bolts won't go in more than like a 1/4 inch i cleaned the holes with penetraing oil, and some brushes. and nothing. any idea?
It’s probably a locking type nut
@@eddiesspeedgarage they are flange bolts. No nut. Bolt needs to go all the way in the hole
@@BeaconRI what I meant was the nut built into the vehicle was of the locking type
@@BeaconRI it’s probably rusted. I had to retap the thread with a m14-1.5 tapper.
@@cpenv thanks for that. I've been researching for weeks and that seems to be it. I've never tapped like that so I'm looking for something to practice on.
The holes on my 17 pilot were rusted out. Had to retap the thread with a m14-1.5 tapper.
You must be in the rust belt like me!
@@eddiesspeedgarage yes sir. MN love to salt their roads.
Any chance you could measure the height from the ground to the top innermost part of the hitch receiver tube? I'm seeing it is 14 inches for aftermarket, and hoping the OEM gets me some extra ground clearance.
It’s recessed into the bumper no loss of ground Clarence
question alot of the after market wiring harnesses do not have either of those control modules do you know what they actually do?
It is a 7 pin connector with brake Control optional. So I’m guessing relays and distribution box?
You should make a video on wireless charger install.
Thanks for the suggestion I’ll look into it!
Hey Ed, I have the 19 Pilot and I'm having a hard time removing the rear panel. I actually watched the video a few times and it doesn't seem as easy as you do it! Lol Any tips?
kwiz59 the little clips have to be squeezed and pushed out at the same time
Is transmission fluid using the same radiator as the engine to cool the fluid or does it have it's own radiator for the towing package?
You will have to install an additional cooler to your existing system.
Hi Ed, I am looking to install a small safe in the large rear cubby area of my 2019 Honda Pilot. Honda schematic did not show what is directly under the cubby box. I am afraid of hitting a wiring harness, etc. Any ideas?
honestly it shold only be the floor but watch out because the spare tire rides directly underneath i have actually drilled straight into it on my first gen pilot
Do I need a torque wrench for this installation?
Can you do a video on installing roof rails for the Honda Pilot?
Im looking into it.
@@eddiesspeedgarage awesome! I’d like to instal one on mine and I really enjoy your videos. They have helped me a great deal
So what kind of weight are you towing and how dose the pilot handle it? I have the 2019 EX-L and I have been meaning to order the hitch to tow my bass boat just wondering if the pilot was good tow vehicle? Thanks for the exilent videos they will be a big help. Sub and liked.
taz man tows great. My son is an auto tech and when he changed jobs I pulled a uhaul covered trailer with his heavy tool box did great.
Hey Ed... need some help here... the new plastic cover does NOT fit on pilots with Kick Sensors... any suggestions please? The dealers are all ignorant... they say it fits but 100% sure it will not fit because the (2) long black rod sensors get in the way and the receiver cut-out protrudes the sensors... Help... need suggestions. Thanks
JayCoolKay look up a relocation kit for touring/ elite with hitch only about $90. Hope this helps
Ed... You da Man!!!! Honda OEM Part Number: 08L91-TG7-100C
By the way... are you a Honda Mechanic? ... or just a natural born genius? :)
JayCoolKay I am a nurse with a mechanical background. But I never put a car in a shop if I can help it. I do it for you guys so you can keep some of your money
cool... Thanks man! Appreciate your tutorials. Luv the old school Z-28... sweet!
Would full size 20" rim diameter tire fits with this oem trailer hitch? The after market trailer hitch has higher tongue weight, but it states it only fita up to 18" diameter tired. Would you recommend going for third party trailer hitch?
firstalex2 I think the problem your running into is the spare tire size. If you have 20” rims your spare would also be bigger. I personally would only buy the Honda hitch due to the fact that it comes with the replacement bumper panel and just looks way better than the hitch hanging under the bumper. And as a bonus the Honda hitch is probably engineered to fit with all size stock rims. Hope this helps!
Can you install the hitch first or is it best to install the wiring harness first?
Michael Nelson it’s makes no difference. I just started at the top and worked my way done. Hope you enjoyed the videos!
Did you have to buy/install hands free tailgate trailer hitch adapter?
Dane Norment
There are 4 different part number for the Honda Pilot hitch , just google it
Does the OEM hitch come with that rubber Honda hitch cover? I got my hitch installed at the dealer today but no cover was included when I picked it up.
Yes it did. Probably should have come with your pilot as well.
Hey Eddie Will a 2019 OEM trailer hitch fit to 2020 pilot?
Yes. I believe the 2023 redesign will be different.
Yes
I just installed the trailer hitch myself and it was hard, don't try to do it yourself it's too heavy , I strapped it first.
Anthony Fig yeah it would be I had a helper.
Where can I buy that things with cover
Does anyone know how to get these push tabs off?
How do you put plastic cover back on? Your video lapses to already installed part.
Dennis Kostenok just switch over the clips and snap/ screw it in
Where did u Buy that bro?
from a local Honda dealer.
Is the transmission cooler beeded or is that a bull shit sales pitch
Seen a lot of people complain that the trans overheats under spirited driving without a trailer.
Is this pilot a 2wd or 4wd?
4wd
For it to two 5k pounds u nee an oil cooler a hitch and it has ti be AWD right?
Correct
Where do you purchase?
Raul Valdivia Honda
Thanks
Ever Canales your welcome hope it helped.
Link for parts??
Joseph Stanley it’s just a stock bought from Honda factory hitch.
That’s too bad I was looking forward to more detail vid. Starts off as a real good video. But he skipped around too much. Unfortunately. Damn!
Thanks for the feedback