I made a base under my machine to raise it up so when I sew the cushion slides on the the top of my cutting table.Just a heads up .Only been upholstering for 30 years
Nice job. You should get a Juki 1510N-7. No more turning wheel during work. No more thread trimming and much more. I've been sewing upholstery 50 yrs now and bought the 1510N-7 15 yrs ago. Wish I had it 50 yrs ago. I just bought another one to expand business.
Very nice work. Can you tell me which Sewing machine you are using and if you purchased a replacement machine what would it be? Trying to figure out which machine to purchase. Thank you.
I just found your channel today You are very talented I know I will enjoy your content By the way my name is Melinda I do some upholstery work on the side I think I could learn a lot from you
I reduced the speed on my "JUKI" single lock stitch with a two pulley system on a jack-shaft and pillow block bearings (McMaster-Carr) but I am a service tech who fixed cars / trucks, retired and doing my own things in leather. Using large thread, smallest needle for hole size, but 4mm apart. Otherwise without modified pulleys, this runs like a weed eater at Wide Open Throttle on crack! You could sew 3' (1 meter) in 4.2 seconds. Hey, where's my fingers dude?
Nice work I have a question did you have to shave any foam off the seats before u added the high density? If you could help thank you. Also do you add string to your bolsters to make them tight or Velcro?? To hanm a lot nice work
That clutch motor is a killer, so much happier with a brushless servo.
I made a base under my machine to raise it up so when I sew the cushion slides on the the top of my cutting table.Just a heads up .Only been upholstering for 30 years
Love the craftsmanship and quality of work
I enjoy the Videos Sir!
Thank u that’s motivation
Great work ❤
Work of art. You sir are talented. Thanks for sharing.
🙏🏽🙏🏽💪💪
Just had to say thank you so much for sharing your how to video I also make console and paint cars to in my hometown now I want to do upholstery
Get it sir go hard🤜🏽🤜🏽💪💪
One of the best around
🙏🙏💪💪
Buen trabajo colega saludos desde cuba
Igual cubano Gracias
🔥🔥🔥🔥🔥🔥
Nice job. You should get a Juki 1510N-7. No more turning wheel during work. No more thread trimming and much more. I've been sewing upholstery 50 yrs now and bought the 1510N-7 15 yrs ago. Wish I had it 50 yrs ago. I just bought another one to expand business.
You got the hardest work I’ve seen.
🙏🙏💪💪
@@stitchingbydiego5522 where are you located bro ? Please don’t say California lol
@@big_reece8632 chicago💪💪
@@stitchingbydiego5522 ok cool
I stay in Mississippi and have a 72 cutlass I need the seats done
Very nice work. Can you tell me which Sewing machine you are using and if you purchased a replacement machine what would it be? Trying to figure out which machine to purchase. Thank you.
I use a Juki and I won’t replace it for any other
@@stitchingbydiego5522 Thanks, but which Juki? I was thinking about a 2810.
You are the best I have ever seen can you suggest a color red vinyl to look great in a black truck so many out there
I use a lot of sinfony classic named American beauty
Beautiful.. love it
Thank u
I just found your channel today
You are very talented
I know I will enjoy your content
By the way my name is Melinda
I do some upholstery work on the side
I think I could learn a lot from you
Thank u melinda
I reduced the speed on my "JUKI" single lock stitch with a two pulley system on a jack-shaft and pillow block bearings (McMaster-Carr) but I am a service tech who fixed cars / trucks, retired and doing my own things in leather. Using large thread, smallest needle for hole size, but 4mm apart.
Otherwise without modified pulleys, this runs like a weed eater at Wide Open Throttle on crack! You could sew 3' (1 meter) in 4.2 seconds. Hey, where's my fingers dude?
😂😂
Great video. Would love to see more .
I will make more and take videos
@@stitchingbydiego5522 What kind of sew foam do you use?
@@tinasmart1635 half inch high density foam
Diego you a BOSS!!!
🙏🙏just learning sir but I appreciate it
Man you do great work brotha
🙏🙏🙏
Hey Diego, nice work, I want some work done on my convertible…. Can u help me out sir???
need a video of you making the lines for the sewing pattern
Before this week out I’ll make one
You take pride in your work I take pride in watching can't wait to drop that 71 olds in your possession
🙏🙏💪💪🙏🙏
Nice work I have a question did you have to shave any foam off the seats before u added the high density? If you could help thank you. Also do you add string to your bolsters to make them tight or Velcro?? To hanm a lot nice work
Pullers and yes I flattered before
Nic jop
Thanks bro 🙏 🙌 💯
Thank you
What kind of foot, needle size and thread for the design stich?
Thread 207
What color vinyl or leather is that
#32GANG🤘🏾
🤘🏽
What size needle and thread are using to stitch your upholstery
I use 2 sizes of needles and thread
What size would that be . I new to this and I'm trying to absorb as much information as I can
207 for top stitch and I believe is 78 for meeting stitching
What type and size thread are you using on the tan colored fabric?
207 poliéster
What grade of threads do you use. Thanks for explaining everything. I’m learning to do upholstery now
205
What’s the price on a 92 Chevy single cab
Depending what do u need done
7739648982
Hey.. what color material is that?
Camel carrara distressed
Where are you located
Chicago
🔥🔥🔥🔥🔥💯💯💯💯
Keep posting .. good 💩
Videos are great Music sucks
stop the music
😩
How can I contact you
7739648982
🔥🔥🔥🔥🔥🔥
🙏🙏💪💪
🔥🔥🔥🔥
🔥🔥🔥🔥
🙏🙏