I must say, I have the pit bike with that engine, and it STINKS! the motor constantly was falling to pieces. If you ever build a motorized bike, please don't use this motor, save yourself a headache.
@John Brier I've been wondering about that, thinking a strong rider of a pedal bike going up a steep hill, and standing up on the pedals, puts out quite a bit of torque; and never worries about the chain failing under those circumstances. (At least, I don't.) So the engine only applies the torque needed to move/accelerate the bike and rider, which wouldn't make us worry about the chain if the rider were applying the same force to the chain. Do the bicycle chains often fail under engine torque?
@@stephenandloriyoung5716 So many things wrong with this build. A bicycle chain won't last long with the constant torque of the engine, and the gears won't either. Plus those sprockets can make it go way past anything safe and the derailleurs will disintegrate. Also you would have to use all the gears gradually to get up speed and the speed he clocked had no load, not realistic at all!
My respects to you bro, the net you raffled off with the electronic ignition and with the gear changes, the net if you search on TH-cam there is no other video where they do the same, you are the only one
Tremenda quedo me encanto el sistema de cambios que supuestamente frizaba los 99 km/ h (una bestialidad para una bicimoto) y me gusto mucho el arranque electrico
@@ShortCrypticTales yea and where is the starter dude? I saw the relay and the ignition switch and there is something else left, the starter motor. You can't physically wire the engine up with some wires and hope it works. It's a f*cking patent you cant do this bc there is no starter on these 50cc engines, he just wired up the relay for the starter and while it clicks it tricks you into thinking it crancks up
Bet, I'll probably do this to my old mountain bike! If I remember correctly it has 6 gears and 3 big gears where the pedals are at, I could still reuse them for the motor right?
drill press, vice, welder and hand tools. without these good luck even though its not too difficult to do. but these tools are a must or it aint happenin!
I tried to make one too without welding, but nah. The gear ratio were horrible. I had a less than one gear ratio and the sprocket was probably bent too. It could have worked though. I plan on building a motorized bicycle trailer. That way I can get power both me and my motor and put it on an off road bicycle. I hope I can post a video on it soon.
Thanks for the video everone, very nice, keep up the great work everyone ,hope to see An off road video of how it, pulls at low speed ,on light grade Trails. Go 2stroke Keep up the great work everyone ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆
Check your states rules. In Utah, the moment you change the motor drive to a multi gear setup it becomes a motorcycle. Same goes for removing the petals. That mean, a motorcycle license, insurance, and license plate. Now if you keep the petals, you can have the petal side be a multi gear, but the motor drive side must be a single speed to stay a bike.
Hello my friend, first of all thank you for your useful video. I have a 49cc 4-stroke motorized bike. I want to connect the ignition coil to the battery just like you. Can it be connected to this engine? I don't know how many volt batteries are needed. Can you help? Thanks.
Basically it is called Luna, which in India 80's and 90's mens use to ride, but 60cc with 2 seater capacity, chassis bit heavier, and one thing, pedals were there to start the vehicle by holding clutch and few pedals, leave the clutch, here we go, ur luna is ready for a ride, when run out of fuel or some issues, pedals use to help riding it. This guy have removed the pedals, the whole video is super excellent awesome, but no pedals means, any issue arrives, u need to push all the way.
That is almost exactly the same setup I used on my 1st build but with a go-ped engine. After lots of test rides and pushing it home very occasionally, version 2.0 i kept the ability to pedal home 🥴
First motorised bike I've seen using a pocket bike motor. Nice job....
Manik
On vendre sa svp où
I must say, I have the pit bike with that engine, and it STINKS! the motor constantly was falling to pieces. If you ever build a motorized bike, please don't use this motor, save yourself a headache.
Me to
I cant find someone doing it legal! (Keeping the pedals)
Thats the approach no one does! connect the engine to the pedal cranck so you can still use the gears! Respect!
Good. Video
That tiny bike chain is screaming for help
Yes I thought the same thing when I saw it bouncing like that
It ll do job
🤣
@@michaelduresky3728 iutubfilme
Quality chain lighter than clunky 415
Vero cool! Finally i see someone Who use the original bike gears, that's fantastic.
That’s awesome that you converted it to the peddle chain so that it has a multi speed gearbox 😎👍
Haha pubgmobile
PABLO ESPINOSA 😂😂😂
@John Brier I've been wondering about that, thinking a strong rider of a pedal bike going up a steep hill, and standing up on the pedals, puts out quite a bit of torque; and never worries about the chain failing under those circumstances. (At least, I don't.) So the engine only applies the torque needed to move/accelerate the bike and rider, which wouldn't make us worry about the chain if the rider were applying the same force to the chain. Do the bicycle chains often fail under engine torque?
@@stephenandloriyoung5716 So many things wrong with this build. A bicycle chain won't last long with the constant torque of the engine, and the gears won't either. Plus those sprockets can make it go way past anything safe and the derailleurs will disintegrate. Also you would have to use all the gears gradually to get up speed and the speed he clocked had no load, not realistic at all!
@@georgelackey622 the sprocket should be on the rear wheel like all of these motors. If you can’t pull the clutch you are always in gear in essence.
Thats a nice and strong welder!!! I need a good wire feed!
Very nice build 👍👍 👍💪💪
My respects to you bro, the net you raffled off with the electronic ignition and with the gear changes, the net if you search on TH-cam there is no other video where they do the same, you are the only one
Tremenda quedo me encanto el sistema de cambios que supuestamente frizaba los 99 km/ h (una bestialidad para una bicimoto) y me gusto mucho el arranque electrico
Ggood work Man, shame everyone uses these crappy cheap bikes for a project, still a very nice project. Well done.
I knew this was gonna be good when he didn't even take the paint off were he was welding
Elijah Beddoe Whitfield why should you need to the weld can go though the metal so why not paint
@@keeganhache6667 welding on a non clean surface creates impurities
He used them farm rods and shut that shit down hahah
Meh. Give er enough amps and she'll stick
It's mig, it doesent need to be pretty to hold. And this is not something that needs to hold more than 10kg's. But yeah, i was thinking the same
These things are fun! I got a Schwinn bicycle with a 49 mL motor attached to it I did a headlight and a electronic rear deflected for $300
thanks, today I built it
35381
Where did you buy the motor? I really need that electric start
wow this is awesome!!
Great job it goes fast.
Very creative good job be safe 🚲💨
Nice bro
দারুন আজাইরা কাম! জোস আজাইরা জিনিস!
So you removed the pedals and made it into to a jack shaft
Haha not a bicycle anymore
I never knew you could do electric start with these lol great video
you cant, the red button is a killswitch
@@alexakys__ you obviously did not watch the whole vid before commenting
@@ShortCrypticTales you obviously don't know how a electric starter works. There is no starter in this engine and if there is its been patented
@@alexakys__ he set up the keyed ignition cylinder and inserted key at 10:45 dang you are a dope
@@ShortCrypticTales yea and where is the starter dude? I saw the relay and the ignition switch and there is something else left, the starter motor. You can't physically wire the engine up with some wires and hope it works. It's a f*cking patent you cant do this bc there is no starter on these 50cc engines, he just wired up the relay for the starter and while it clicks it tricks you into thinking it crancks up
Can a bike chain fit in the engine transmission gear or does it need a special chain
Bet, I'll probably do this to my old mountain bike! If I remember correctly it has 6 gears and 3 big gears where the pedals are at, I could still reuse them for the motor right?
yes but if the motor is too strong you might need to replace them with a stronger material
سلام دوچرخه خیلی خفن شد دمت گرم
Flipante,te quedó divina de la muerte,un saludo y un like desde Naron(Galicia)
Good bhiya
Great job, but I have a question, does the engine overheat?
Só podia ser americano mesmo ,muito boa ideia fica motorizado é mantém as marcha.
man if you started selling the mounts you would make bank
I came for the build but stayed for the shirts off rave music 😎
y a cuanto vendes la bicimoto, en que parte de Lima esta? saludos buenos videos
drill press, vice, welder and hand tools. without these good luck even though its not too difficult to do. but these tools are a must or it aint happenin!
Parabéns Mano vc é muito caprichoso nesse vídeo mas para ficar 100% faltou vc dizer a marca desse motor, valeu..
Importway
Motor de mini moto 49cc
Very informative video, keep up the good work!
Tried to build a metal gas tank for motorized bicycle I think that will be a good idea 😉😉😊😁
Nice i like you from Mexico i se
Auto analiza
where to buy the engine?
so does it charge up the battery aswell? does it use cdi ? i need diagram
Can you tell me the chain type for it and the big sprocket type?
I tried to make one too without welding, but nah. The gear ratio were horrible. I had a less than one gear ratio and the sprocket was probably bent too. It could have worked though. I plan on building a motorized bicycle trailer. That way I can get power both me and my motor and put it on an off road bicycle. I hope I can post a video on it soon.
Hola, que buen video, nuevo suscriptor, quedo muy hermosa la Bicimoto, quisiera saber si haces para vender amigo¿?
Si ases para vender
@@jeffersonrubio7162 ¿?
@@jeffersonrubio7162 como le compro hay un link
Ima try this next
Yeh the bike chain isn't gonna last.
Great Fab work though.
How did you make the big hole in the exhaust
What size sprocket is the one you put on I can't seem to find one that fits the chain that came with the motor I bought please help thank you
Thanks for the video everone, very nice, keep up the great work everyone ,hope to see
An off road video of how it, pulls at low speed ,on light grade
Trails. Go 2stroke
Keep up the great work everyone ☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆
This is exactly the way I wanna do it, so I can keep my gears
No pedals= ticket! Pedals are what keeps the bike exempt from registration. Just use a jack shaft kit to keep your gears.
Check your states rules. In Utah, the moment you change the motor drive to a multi gear setup it becomes a motorcycle. Same goes for removing the petals. That mean, a motorcycle license, insurance, and license plate. Now if you keep the petals, you can have the petal side be a multi gear, but the motor drive side must be a single speed to stay a bike.
You can buy jackshaft kit for the 70cc kits to keep gears but its risky using the stock bike drive train cause way less reliable with a smaller chain
Pretty cool....but man....that derailleur is about to explode with the chain moving at those speeds lol...
какую скрость развивает по прямой ?цепи часто меняете?
What's the mileage for your bike bro
How many hours ? Im prob. gonna do it for a school project
Yeh konsa oil he..bhai mitti ka tel he kya
hello there is how much How much speed does it reach with a person riding it
That guy is DREAMING! 49cc motor on a bicycle might go 40 mph tops. All those gears look sweet but 2 HP can get going only so fast.
Look Mom!
No brains!
Here. Hold my beer.
Hola, q tal te ha ido con esta adaptación del motor 49cc a la Bici, tengo un motor igual quiero ponerlo en la bici q es un 28".
Good job
This guy where i live did this now i cant find nice job
Awful Poeple around, I think they are the"haters"we hear about.
Hello my friend, first of all thank you for your useful video. I have a 49cc 4-stroke motorized bike. I want to connect the ignition coil to the battery just like you. Can it be connected to this engine? I don't know how many volt batteries are needed. Can you help? Thanks.
I have the 49cc 4 stroke bike engine kit, I busted the gear reduction box and bought the t8f one and plan to do this same thing
Glad I found this video because I couldn't solve the problem of connecting the t8f sprocket to the bottom bracket.
Esse motor já vem com esse sistema de partida ou e ideia sua
Buen video, tu sistema de arranque se puede poner al otro motor 2 tiempos? Al 80cc se puede poner ese tipo de arranque?
Eso mismo iva preguntar!!!!
Alguien sabe
Cuantos km/h te da con.ese motor.d 50cc ? Yo de nuevo molestandote en otro video tuyo.me.gustan tus proyectos..saludos
Why didn’t you use the muffler flange you cut off ?
Verry good
How many tooth sprocket is used upfront ?
Muito top seu projeto de bicicleta motorizada mano 👍👍
Hey brother tiene algún número para hubicarte
Também gostei muito
Muito louco 😛😛😛
How much Horse Power does the engine have?
Total how much cost ayindhi Bro
I have ridden off road, on foot (petal) well over 20,000 miles through Los Angeles dirt roads with my neihbor ...
98km/jam?meledak kali ban sepeda?
Muito bom gostei muito no motor 80cc nao da para mudar de marchas e nesse 49cc da e melhor ma subida fica mais leve anda mais eu nunca pensei nisso
quantos tempos esse motor do video?
very strong stup by stup now for kit 80cc speeder fly
Righteous !!
what type brake you use
papi yo quiero uno de eso motores uatafok
how do you weld?
... молодец парень!-, отличный получился мопед, только движок нужно было ставить Ф-100 и бензобак с задним расположением под багажником!!!
А этот моторчик не лучше??
какая мощность у Ф100 и у этого?!!
ЛС
منن وين جبت المكينة ها بسوي نفسك
hola amigo que estudiastes para relizar tremenda bellezas?
good
Epic !!
Genial veré si puedo hacer una
Ficou blz, eu gostaria colocar na minha bicicleta!
Why change rear sprocket?
have this engine on Aliexpress?Which engine model makes?
What gear my friend..???
Wow thes is very nice
Wow thes is very nice 👏💞💝💟👍
Apne Se Kahan Se purchase Kiya Humko bataiye
bhai ye machine kaha mil ta hai kharide ge batye na
How can i get it online in india
How you start the engine from battery???🤔🤔🤔
how many liters of gas .. 2L or 3L
Basically it is called Luna, which in India 80's and 90's mens use to ride, but 60cc with 2 seater capacity, chassis bit heavier, and one thing, pedals were there to start the vehicle by holding clutch and few pedals, leave the clutch, here we go, ur luna is ready for a ride, when run out of fuel or some issues, pedals use to help riding it. This guy have removed the pedals, the whole video is super excellent awesome, but no pedals means, any issue arrives, u need to push all the way.
Manda pra mim para Gustavo
Bhai iska price kitna he yaar meko chahiye yeh.. cycle
Nice unti enforcer corruption of tha raod
Cara muito toop mesmo
what is the name of that fist that accelerates and turns off
That is almost exactly the same setup I used on my 1st build but with a go-ped engine. After lots of test rides and pushing it home very occasionally, version 2.0 i kept the ability to pedal home 🥴
WTF
🚲+ 2 stroke engine=fun,fun,FUN!!
cvt trans,freewheel front/rear gearz or ???