CRF110 Yuminashi High Flow Beardo Pump Mod Installation | Stunt Wheelie Honda
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- Here's how to install my pumps for your CRF110. I go over why they're needed as well. Chaptered the video so you can skip around, but be sure to watch it all.
CHAPTERS:
00:00 Let's Go!
00:39 Beardo Bitchin'
00:56 Back To Work
01:58 ProTip
02:26 Engine Parts
02:57 Why You Need A Modified Pump
03:59 Screen Bypassed
04:22 Oil Pump Drive
04:46 Back To Work
05:27 Pump Parts
07:02 Case Plug Install
08:54 Prime Pump
09:18 Pump Install
12:24 Do Break In Period
13:09 More Beardo Bitchin'
13:23 Thanks For Your Support!
Store: www.grombeardo.com
Instagram: @GromBeardo www.instagram/grombeardo
FaceBook: / grombeardo
All the links to everything GromBeardo!: www.linktr.ee/grombeardo
Feel free to email me: GromBeardo@gmail.com
#beardopumps #grombeardo #grombeardoapproved
10% Off RiderBag!
www.riderbagusa.com/?ref=AARO...
Code: GROMBEARDO10
ChinMounts 10% Off!
chinmounts.com/?ref=grombeardo
Code: GROMBEARDO
Go beyond your YT analytics and install TubeBuddy for FREE:
www.tubebuddy.com/grombeardo
*AMAZON Links*
Street Legal Pit Bike Parts List:
6” Slim 12V LED Headlights:
SINGLE: amzn.to/3YtHbXU
PAIR: amzn.to/3E2pwhO
Pair of ⅞” Handlebar Mounts for Headlight: amzn.to/3xkel0n
On/Off Switches for Headlight or 12V System Power: amzn.to/3E46IyG
Engine Stop/Kill Switch: amzn.to/3XrYszB
Cheap Bar Mount Mirrors PAIR: amzn.to/40QT7EU
12V Lithium Battery Pack w/ Charger: amzn.to/3jUGwzY
Plastic Multiswitch Headlight, Turn Signals, Horn: amzn.to/3Ii7KZB
Aluminum Multiswitch High/Low Beam, Turn Signals, Horn: amzn.to/3lokaXM
Universal 12V Horn: amzn.to/3lzyUDu
Pair of Adjustable 2-pin LED Flashers: amzn.to/3HUOhh7
Universal Kit (Multi Switch/Horn/Flasher): amzn.to/3YLm4QH
Expandable Braided Wire Loom: amzn.to/3lw1Vjh
M10 Copper Crush Washers for Banjo FIttings (20pack): amzn.to/3RXE48n
Hydraulic Brake Switches:
90deg M10x1.25mm: amzn.to/3InAjWJ
Straight M10x1.25mm: amzn.to/3IlSkEI
90deg M10x1.00mm: amzn.to/3Yqe73C
Straight M10x1.00mm: amzn.to/3K5j91d
Universal M10: amzn.to/3K6N9Kg
Mechanical Brake Light Switch: amzn.to/3E4laXQ
LED Tail/Brake/Turn/Plate and Plate Light Assembly: amzn.to/3XxOmNA
GROM Parts:
Bar ends: amzn.to/2MSYYrX
Shift Shaft Support: amzn.to/3qbHNAd
ProTaper Pillow Tops: amzn.to/3pYXLNM
ProTaper DRZ/KLX 110 Bars: amzn.to/3bnK3Qq
Bar Mount Mirror: amzn.to/39gPK07
Phone Ram Mount Parts:
-Handle Bar Ball Mount: amzn.to/3sbXZDi
-Phone Holder: amzn.to/3s43MdU
-Short Arm Mount: amzn.to/3btwgrF
-GoPro Ball Mount: amzn.to/3nzffPc
LED Integrated Taillight: amzn.to/3q5n3tD
MX Foot Pegs: amzn.to/2Lha1up
-My Instal Video: • CHEAP Grom Dirt Bike P...
LED Plate Lights: amzn.to/3bmZQ1V
Number Plate CRF: amzn.to/2LhaeOd
Light Bar Mounting Bracket: amzn.to/3npJbgE
6” Light Bar: amzn.to/3s7UWMd
Camera Equipment I Use:
Canon M50 w/ kit lens: amzn.to/2LMjXwi
-Jobi Gorillapod: amzn.to/3adulqd
-MOVO VXR10 Mic: amzn.to/3aa7sUE
-Neoprene Case: amzn.to/3rFnBHm
-A Legit Tripod: amzn.to/3aaj7CI
MotoVlog and GoPro setup:
-Hero5 Black x2: amzn.to/3aUAoz7
-Audio Adapter: amzn.to/372seDt
-Case for Camera and Adapter: amzn.to/3perQIz
-MX Helmet Mount: amzn.to/3aVXyVV
-Purple Panda Mic: amzn.to/3pcw6bA
-Cheaper Alternative Mic: amzn.to/375Y2HM
-Jobi Gorillapod: amzn.to/3acqD08
-30KmAh Battery Bank: amzn.to/2OqwrKR
-MicroSD Card SanDisk Extreme 128G: amzn.to/2Z9XYT2
DISCLAIMER: The information contained on this TH-cam Channel and the resources available for download/viewing through this TH-cam Channel are for educational and informational purposes only.
This description may contain affiliate links. If you purchase a product through one of them, I will receive a commission (at no additional cost to you). I only ever endorse products that I have used and benefited from personally. Thank you for your support!”
As an Amazon Associate I earn from qualifying purchases. - ยานยนต์และพาหนะ
These do not for the CRF50. I forgot the clutch is on the end of the crank on that model. While the pump itself fits, the pickup tube is too high and interferes with the clutch housing. Next batch I'm gonna try to see if I can get the tube to lay down lower so it will fit that engine. Not expecting to find a solution, but worth trying. I'll update here if I can get it to work👍
No worries thanks for the reply! How about for the gen 2/3 groms? I know the gen 3s have an issue as is, but would the high flow cause the bottom end to starve? [Stock motor]
@@daynuhbraps Nope all good. I have all the gens of the Grom and all have high flows, no issues🤘
Hay buddy I just wanted to add a idea wear the oil screen at its not A bad idea to add/ put a Earth magnet in that cavity to it will catch all small metal partials that maybe in the engine oil it's extra pertection.😉🛠️💯🏍️🎇👍✌️ Great stuff keep it coming
Yeah, there's no oil flow through that cavity anymore though. Wouldn't hurt, but it's not gonna see much oil. I have put filter screens on the ends of tubes and have people running those pumps on Groms, but it's a pain in the ass to make them, so I'm not offering them 🤪
Great video.
Thanks for watching and taking the time to comment! Appreciate you!🤜💥🤛
🔥🔥 Mine should be here Monday. Much better design than the plug on the CS one. And a hose and clamp 🤦🏻♂️
Right, ha, ha. I saw that and was like, WTF!?!?
@@GromBeardo I mean no hate on them they make some cool stuff but they rushed that pump capitalizing on the fact no one else made them. Either way stellar write up in the install 🤙🏼
Hey beardo For the hole you have to drill on the side,how far do you drill?just a hole through the first wall?
Hole is through the base and down into the cavity in the case.
🔥🔥🔥
🤜💥🤛
@@GromBeardo I have 2023 grom, probably need to snag one soon.
Awesome! I'll be here when you need one💪
@@GromBeardo absolutely, thank you!
Great video bro. I need to grab a pump or 2 off you at some point. I got a new 23 with an hr meter on it. What would you say the break in point is on the CRF 110 10hr?
Yeah, like 10-12hrs is probably a good reference point for break-in. I'm not sure what Honda says as far as hrs.
Would a high flow pump cause issues on a stock motor? Mainly for wheelies here. Thanks in advance!
Nope. I have high flows in all my bikes, even the stock ones. I know a guy that hooks me up though🤪🤣 Never had any issues.
any way to order just the pipe?i have the yuminashi but saw this after
Nope.
Does this change how you change the oil?
You need to change it more often, but it's changed the same way.
I need a 110 now then is what your really telling beardo? 😅
Yeah, duh 😜
they really can be upgraded to look SIKKKKK
Pro tip 😂 Pro tip 2:05
😁