How to assemble the Onefinity CNC - woodworker model
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- In this video I show a more detailed assembly of the woodworker model of the ONEFINITY cnc machine. This video does not do this machine justice, it is very sturdy and looks promising! however time will tell how well this machine is built!....
Onefinity CNC - www.onefinityc...
#onefinitycnc #onefinity #cncmachine
Finally got me Journeyman X-50. Thanks for sharing
That’s awesome! Maybe one day I’ll upgrade the rail to the journeyman x-50. Good luck and thank you for watching!
Mine is on order! End Feb. Thank you for the video!
Have you had any issues? Looking at getting one.
@@jessicalane107 none at all. This cnc is a beast! Don't look any longer, buy now. Well worth it!
Great video! I too have had a Shapeoko for the past 2 years. My Onefinity is coming first week in April.
Thank you for watching!
How do you like it? Better than the shapeoko?
thanks for the videos. mine arrives in beginning of April, so very helpful.
Heck yaw! Thanks for watching.
How do you like the machine?
@@jessicalane107 the machine is a beast, very happy with it so far.
I had my mind set on the Shapeoko 3 until I found this, may have to go this route instead. Thanks for the video.
The shapeoko is a great machine, I wish I had of made videos when I had it. The nicest thing is not having to mess with belts and v wheels with onefinity! I appreciate you watching.
@@74CreativeDesigns i almost got the shapeoko also until i saw this..Just looks way better to me w ballscrews and rigidity factor..i ordered 3-4 mos ago..getting it in 2 wks..cant wait..i better start making the table..lol
I've had the shapeoko... It's junk. This looks by far.
Thanks for sharing. Lovely machine!
Mine comes in late March/early April according to the website. Subscribed to see what you come up with. I've already gotten my Makita and dust hose boom as well as other "necessities". LOL. Good job on the video!
Can I use a Dewalt 616 I already own?
Great video! Mine is coming! What size screen did you get? They offer a larger one now
Jaycee, thank you for watching! I have the standard 7”, at that time only one size was available. I’d say go for the bigger one, it will make it easier to read the text on the screen for sure.
Nice video. Just went to your page and noticed their wasn’t anymore? What happened to waste board and tramming video?
I won’t lie, so the phone I had the footage on took a dive with me in a lazy river and didn’t survive! I’m due for a new waste board. Hopefully I’ll have something soon.
just ordered mine,thanks.
That’s awesome! Hope you enjoy it.
Hello, I thought the rotary axis didn’t/couldn’t work with the Onefinity. Did you get it to work? Thanks
does it also work on acrylic?
Did u have to reposition your router holder down a hole to get it to reach ur waste board? I did mine
That process gets you a parallelogram that may be square. You need to check your diagonal measurements to verify.
Engrave a shallow square or just 4 corners and check that. I've seen numerous forum posts on out of square. I know it's not in the onefinity instructions, but you can hope for square or make it square. They went for "hope" I guess.
Don't believe me? Before you put screws in the far end move the feet left and right. Is it square???
I have not bought a machine yet but really appreciate your attention to detail and sharing that advice.
I don't own one of these, but I've been considering. It seems to be it'd be better to fully attach one of the Y rails to your surface, pull the X rail forward to attach one corner of the other Y rail, then move the X all the way back to square it. Instead of having a single point on one corner that could, like you said, lead to a more parallelogram shape.
Would you happen to know if their Controller can also control a typical Chinese VFD for a Spindle? ( setting its speed via *Sxxxxx M3/M4* and turning it on/off via *M8/M9* )
Hi - can you tell me what the height is from the mounting surface to the top of the Z-motor?
Is there a spindle router that I can attach instead of the makita router ?
Yes, I would check out Ben Meyers video on it. I believe as long as it’s a 60mm spindle you’re good to go.
just orderd mine today!
Nice!! It’s worth the wait, I hope you enjoy it as much as I have.
How's the rigidity on the Z?
What is the dimensions of the work area? Can you slide a piece of plywood in there?
Where can I buy one in canada
William, onefinity is based out of Canada, I would definitely try contacting them! If I recall their website has a Canadian and US webpage to purchase.
thank you
that is a nice machine but I see a lot of dust getting on your rails and going into your bearings
I can definitely see that being a concern, hopefully with preventative maintenance and dust collection it won’t be an issue. Only time will tell and I’ll update everyone with each video. Thanks for watching!
Wow looks far far more stable/ridged then the x-carve.
Two moose design has a great video comparing the two! I’ve only owned the onefinity and shapeoko. Even though the shapeoko is a great machine, the onefinity has some amazing features.
The video shows you had the rails already screwed down while you were demonstrating. 😏
cant wait until mine comes so I can quit watching all the videos.