Kwam deze video bij toeval tegen. Mijn vader en ik kwamen vroeger altijd op MSX beurzen en jij was daar ook altijd. Je had toen voor ons dit gedaan (wat je in de video doet) en de 8250 die mijn pa toen had 7MHZ gemaakt. Mijn pa is helaas overleden 4 jaar geleden maar ik denk dat als hij nog geleefd had hij net zoals ik het leuk zou hebben gevonden je weer es gezien te hebben na al die jaren hier op youtube.
I use a mini slot expander, where there is an on and off switch for each slot, boot with the switch off and soon after the system loads, activate the switch and enjoy only the SCC audio.
It's not the worst method I've seen so far. It breaks most case clips and it is not necessary to cut the sticker. By doing so, the box will have a hard time staying closed. The method with thin plastic cards avoids breaking the clips. In addition, the switch used is not a good choice. It is better to use a smaller sliding switch and hold it inside with hot glue so that it is more discreet and less annoying. Anyway I recommend rather to buy a 2048kB sound cartridge. It will cost you less, and you will have 2048kB and the SCC+ to run all existing SCC games even SD Snatcher.
Mooie tijd die msx 2 had toen salamander als scc met schakelaar . muziek is echt geweldig hadden toen de philips 8245 later nog uit gebreid na 512kb ram was heel veel voor die tijd beste 8 bit machine fm pack en philips muziek module clubs was leuk bakken vol met schijfjes en demo,s super mooie tijd als het 16 bit was geweest was ook wel niks geworden denk ik
Great video. I want to do the mod, but firts of all I want to ask you what it happends to me: Recently I bought a cartridge which can execute several old roms, .cas and .dsk and it's possible to indicate if we have a SCC cartridge in the slot 2 in order to use the chip. I put the F1 cartridge, with tape in pin 13 in order to avoid the auto start of the game, and then I can select the slot and "extrnal SCC" as an option. All, well...almost all, the roms compatible with SCC chip works as requested but not the F1 spirit rom. It sounds as if it fault some channel. Maybe the reason is because the original cartridge is doing the funcion of the external SCC cartridge? It's strange, because nemesis, salamander, kings valley roms, etc... are working fine. I'm trying to avoid the modification of my original cartridge with electrical components and maybe that's the reason? I hope I can find a solution or, at least, an explanation. thanks in advance. regards
@@repair-basbaskornalijnslij9245 Hello. I tried with 3 different roms with the same result. I will try again lookinf for another roms. At the end I will perfom your mod, but I want to be sure before of that. And, if I get a nemesis 2 or salamander, I prefer to keep safe my unique SCC old F1 cartridge :) i'm in love with it since I was a kid ;) you know as you said how many hours you spend playing it :) regards
maybe if you can, of course, try to execute any f1 spirit rom using the original cartridge as external SCC you can tell me if you have the same issue. I've just upload a video with the issue. remember that I'm using the cartridge with tape in pin13 before performing your mod. I want to ensure it before. --> th-cam.com/video/Mu40KvTMyy8/w-d-xo.html
Kwam deze video bij toeval tegen. Mijn vader en ik kwamen vroeger altijd op MSX beurzen en jij was daar ook altijd. Je had toen voor ons dit gedaan (wat je in de video doet) en de 8250 die mijn pa toen had 7MHZ gemaakt. Mijn pa is helaas overleden 4 jaar geleden maar ik denk dat als hij nog geleefd had hij net zoals ik het leuk zou hebben gevonden je weer es gezien te hebben na al die jaren hier op youtube.
I use a mini slot expander, where there is an on and off switch for each slot, boot with the switch off and soon after the system loads, activate the switch and enjoy only the SCC audio.
Oh men oh men, what have you become old. Last time I saw you in real life, you were just a kid. 🤠
It's not the worst method I've seen so far. It breaks most case clips and it is not necessary to cut the sticker. By doing so, the box will have a hard time staying closed. The method with thin plastic cards avoids breaking the clips. In addition, the switch used is not a good choice. It is better to use a smaller sliding switch and hold it inside with hot glue so that it is more discreet and less annoying.
Anyway I recommend rather to buy a 2048kB sound cartridge. It will cost you less, and you will have 2048kB and the SCC+ to run all existing SCC games even SD Snatcher.
Mooie tijd die msx 2 had toen salamander als scc met schakelaar . muziek is echt geweldig hadden toen de philips 8245 later nog uit gebreid na 512kb ram was heel veel voor die tijd beste 8 bit machine fm pack en philips muziek module clubs was leuk bakken vol met schijfjes en demo,s super mooie tijd als het 16 bit was geweest was ook wel niks geworden denk ik
1:30 better use fan not to cut the label but just unglue it.
Great video, thanks!!
Lekker bezig Bas
10:16 Mr. Krabs’ theme
You could also have left the sticker intact by simply unfolding it.
Ofcourse it is possible, but this is the way I will change it. Everybody can do it on its on way...
NICE WORK 10/10
Great video. I want to do the mod, but firts of all I want to ask you what it happends to me: Recently I bought a cartridge which can execute several old roms, .cas and .dsk and it's possible to indicate if we have a SCC cartridge in the slot 2 in order to use the chip.
I put the F1 cartridge, with tape in pin 13 in order to avoid the auto start of the game, and then I can select the slot and "extrnal SCC" as an option.
All, well...almost all, the roms compatible with SCC chip works as requested but not the F1 spirit rom. It sounds as if it fault some channel.
Maybe the reason is because the original cartridge is doing the funcion of the external SCC cartridge? It's strange, because nemesis, salamander, kings valley roms, etc... are working fine.
I'm trying to avoid the modification of my original cartridge with electrical components and maybe that's the reason?
I hope I can find a solution or, at least, an explanation.
thanks in advance.
regards
it is possible you have a wrong cracked version. and if you do is as shown on the video it should work
@@repair-basbaskornalijnslij9245 Hello. I tried with 3 different roms with the same result. I will try again lookinf for another roms. At the end I will perfom your mod, but I want to be sure before of that. And, if I get a nemesis 2 or salamander, I prefer to keep safe my unique SCC old F1 cartridge :) i'm in love with it since I was a kid ;) you know as you said how many hours you spend playing it :) regards
maybe if you can, of course, try to execute any f1 spirit rom using the original cartridge as external SCC you can tell me if you have the same issue. I've just upload a video with the issue. remember that I'm using the cartridge with tape in pin13 before performing your mod. I want to ensure it before. --> th-cam.com/video/Mu40KvTMyy8/w-d-xo.html