Little bro, I know you'll be thinking that you know better, but you don't. You literally removed the first leather layer off that steering with that brush. Also, 1:40 dilution, did you only used a drop of that thing? Increasing the dilution and using hard brushes isn't the key. Don't use GS on leather. just dont. Instead, use PO (Pol Star), use it with 1:10 dilution and you're good to go with the interior for the most part, regardless of the dirt. Invest in better equipment, use horse hair brushes and chemical resistant spray bottles. Literally stopped watching the vid after that steering murder.
Ye steering pe itna hard brush mahe marte bhai its a napa leather it will be ruined use horse hair brush or auto fibre scrub Secondly interior k liay use kouch chemie MZR not green star
No difference, mzr is also heavily alkaline and specifically designed for upholstery. Both will damage if not used correctly. You have to leave the surface at a neutral pH state. Use pol star for interior and delicate surfaces that have dyes etc. Or just balance the surface after mzr or gs, by either rinsing(wet cloth) or by something acidic to bring the pH level down from 12/13 to 7 cancel each other out.
@@ahmadsultan1018 kal group mei phoniex wala mei he tha Ap zara apne akkar torrein or group mei paish hon takkay hum apko jitna acha guide kar sakte hein karein gye ye leather pe ye brush use nahe karte! Secondly GS itna strong degreaser hai ye leather or interior k liay nahe hai i clean my car's engine and tyres with it
Amazing work been doing all this since my childhood but good to see your content making me learn new techniques just a question what all purpose cleaner do you suggest using any brand have tried many but not satisfied with it Just few questions mind sharing a good apc in Pakistan Which pressure washer and foam lance you using Also looking forward to telling us on how to clean a fabric setas properly Overall great content keep up the good work you doing 👍
For heavy soiling, lightly pre soak with water. Spray heavily a good apc, use a medium stiffness bristle brush to agitate. White drill brush on a drill is much better. After agitation, vacuum the seat thoroughly and in a uniform pattern. Lightly soak the fabric again with water and vacuum again to rinse the fabric. Ensure thorough vacuuming to get most of the water out of the fabric then let air dry. Alternatively use an extractor machine instead of avacuum if you have one. For very light soiling spray a low dilution of apc and agitate with cloth to transfer dirt to the cloth.
Good work brother! MashaAllah❤
bro m 10 yrs i wash car clean
Bro frame wide kro ap nazr arhe sirf
Little bro, I know you'll be thinking that you know better, but you don't. You literally removed the first leather layer off that steering with that brush. Also, 1:40 dilution, did you only used a drop of that thing? Increasing the dilution and using hard brushes isn't the key. Don't use GS on leather. just dont. Instead, use PO (Pol Star), use it with 1:10 dilution and you're good to go with the interior for the most part, regardless of the dirt. Invest in better equipment, use horse hair brushes and chemical resistant spray bottles. Literally stopped watching the vid after that steering murder.
also dont spary on the buttons. spray only on the brush
If u use a brush while vacuuming. it takes out alot more dirt.
Nice job
Godspeed champ
Mashallah ⚡️
it means iam youngest detailer
Great work!
Bro maza aagaya video dekh ka. Good Work. Pakistani Chrisfix 😂
MashahAllah
Great work 😍😍
thanks
Pehlay apnay aap ko detail kr chu chu
Ye steering pe itna hard brush mahe marte bhai its a napa leather it will be ruined use horse hair brush or auto fibre scrub
Secondly interior k liay use kouch chemie MZR not green star
No difference, mzr is also heavily alkaline and specifically designed for upholstery. Both will damage if not used correctly. You have to leave the surface at a neutral pH state. Use pol star for interior and delicate surfaces that have dyes etc. Or just balance the surface after mzr or gs, by either rinsing(wet cloth) or by something acidic to bring the pH level down from 12/13 to 7 cancel each other out.
@ceasar5871 yes indeed, you have to leave it at a neutral state
Kochkemie gs is good if used with good dilution plus the leather was very dirty thats why i used the hard bristle brush
@ahmadsultan1018 the dilution you can justify but not the hard brush😂. Gs is very powerful, you only need that red brush you were using.
@@ahmadsultan1018 kal group mei phoniex wala mei he tha
Ap zara apne akkar torrein or group mei paish hon takkay hum apko jitna acha guide kar sakte hein karein gye ye leather pe ye brush use nahe karte! Secondly GS itna strong degreaser hai ye leather or interior k liay nahe hai i clean my car's engine and tyres with it
Bro which shampoo did you use you didn’t mention
i use meguires/koch kemie and pioneer
Engine bay detailing video bano
Ok coming soon
Love the dedication and passion ❤️
thank u brother
Amazing work been doing all this since my childhood but good to see your content making me learn new techniques just a question what all purpose cleaner do you suggest using any brand have tried many but not satisfied with it
Just few questions mind sharing a good apc in Pakistan
Which pressure washer and foam lance you using
Also looking forward to telling us on how to clean a fabric setas properly
Overall great content keep up the good work you doing 👍
All purpose cleaner kochkemie green star
i use devolt pressure washer and mjjc foam cannon
@@ahmadsultan1018 Thanks for sharing the details
Good work, keep it up😍
Thank you, I will
How do you get that much thick foam ???
the foam cannon+dilution
@@ahmadsultan1018 that foam canon is pretty expensive tho
What to do if I have fabric seats ?
Whenever I spray apc on it
It gets worse
Extractor if it’s very dirty
You will have to wash them with pressure washer after rubbing in the apc
@@ahmadsultan1018 ye sikhaya h menay 💀
For heavy soiling, lightly pre soak with water. Spray heavily a good apc, use a medium stiffness bristle brush to agitate. White drill brush on a drill is much better. After agitation, vacuum the seat thoroughly and in a uniform pattern. Lightly soak the fabric again with water and vacuum again to rinse the fabric. Ensure thorough vacuuming to get most of the water out of the fabric then let air dry.
Alternatively use an extractor machine instead of avacuum if you have one.
For very light soiling spray a low dilution of apc and agitate with cloth to transfer dirt to the cloth.