How To Install A Ground Anchor | Ultimate Bike Security

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 พ.ย. 2024

ความคิดเห็น • 190

  • @gmbntech
    @gmbntech  5 ปีที่แล้ว +21

    Have you installed a ground anchor?

    • @RobertSchuster68
      @RobertSchuster68 5 ปีที่แล้ว +4

      GMBN Tech why are you not having any pedal on your bikes? Another security protection. Did you than also put your pedals in a Tresor? Did you also install a camera, noise-Alarm and a automatically pepper spray?

    • @Bodom1after1midnight
      @Bodom1after1midnight 5 ปีที่แล้ว +1

      Just installed the gold rated Oxford one to the wall. A good tip is to not leave tools that thieves can used laying around in the same room as the bikes. If you're storing your bikes in your workshop or garage, just be wary of how easy the access is to your cordless tools, angle griners/drills/crowbars.

    • @dx-nils4516
      @dx-nils4516 5 ปีที่แล้ว

      At time not but i want to buy one. but can i insatiate a groundanker on the sealing?

    • @rupedog
      @rupedog 5 ปีที่แล้ว

      Yep, 2 anchors, and D lock and heavy chain. But nothing is impregnable.

    • @andycanon1
      @andycanon1 5 ปีที่แล้ว

      Yep. I installed a ground anchor and then built my bike cave on top of it. I run a kryptonite chain through the floor to one bike and use another to chain all of my bikes together.

  • @legion2k988
    @legion2k988 3 ปีที่แล้ว +12

    Tip for getting the dust out.. When running the vacuum over the hole. Have a straw stuck down in there but outside of the vacuum. The vacuum will draw are from the hole and the straw will replace that air acting like a little blower all the way to the bottom. Gets all the dust out.

  • @andre0baskin
    @andre0baskin 5 ปีที่แล้ว +35

    When drilling into the concrete it helps to start the hole with the hammer function off. That way the drill bit jumps around a lot less. Once you have a small hole started then engage the hammer function to drill the rest of the hole.

  • @Inverted8
    @Inverted8 5 ปีที่แล้ว +41

    Very important to keep all your cutting gear locked as well! You don't want to have your bolt croppers and angle grinders at hand for thieves to use. Or keep them away from the garage.

    • @kybercore1213
      @kybercore1213 22 วันที่ผ่านมา

      excellent point!

  • @tylerkammerer4932
    @tylerkammerer4932 5 ปีที่แล้ว +22

    A pro tip, put a wrap of tape around the drillbit to mark the depth . I hold the insert next to the tip and put a bit of tape just above the insert, then you drill down to the tape.

  • @edwinparson346
    @edwinparson346 5 ปีที่แล้ว +4

    Just recently had to install a anti-theft device during a hike & bike in Wrangell mnts in Alaska. I forgot/didn't want the extra weight and hassle of a lock in backpack. So when began hiking parked bike at carpark by park rangers and installed my two stinky riding socks across the top tube woven in between cables. I also left it in hardest gear, shoes clipped to peddles, & helmet woven around head tube cables... I was so happy to see my bike was still there... ...and a hope for humanity. ...or maybe it was the socks that we're the deterent?

    • @steveballzack1409
      @steveballzack1409 2 ปีที่แล้ว

      You probably just have an ugly bike 😜

  • @johannwinkler2183
    @johannwinkler2183 5 ปีที่แล้ว +10

    Im a climber and we use similar bolts for protection when installing them I also take a small round brush to clean the hole out and a straw to blow out the rest

  • @gchsbus
    @gchsbus 3 ปีที่แล้ว +1

    I do not have any of these. BUT this guy is right on point. I have a hole I drilled in my wood utility shed floor and the installed a 20 foot long ground anchor. I attach my motorcycle and UTV to it. Frame to anchor. I use a chain with a kevlar sleeve to secure it. I also run a an additional cable lock from one of the wheels to the frame. Fast forward, there has been a lot of bikes stolen from garages in my area as of recent. People have broken into my garage but I still have my stuff. Enough said. Even if your stuff is in a garage, anchor it.

  • @Garfie1d73
    @Garfie1d73 4 ปีที่แล้ว +6

    Where did the power for the power drill come from? Well, from the same power outlet the thief will use for his angle grinder. So keep in mind to install a circuit breaker for your garage power outlets that can only be accessed from somewhere else but your bicycle shed.

  • @MrSpongepimp
    @MrSpongepimp 5 ปีที่แล้ว +66

    fancy a ride mate? " Yeah, just gimme five"... wind blows .... "FFS Doddy , are u coming or what ?' .." Just locking the Earth to my bikes" .( I did like this video)

    • @Uncle_Tom
      @Uncle_Tom 3 ปีที่แล้ว

      Guy is not taking any chances...

    • @Bushchannel
      @Bushchannel 3 หลายเดือนก่อน

      😂lol

  • @davidking3699
    @davidking3699 5 ปีที่แล้ว +9

    The problem is sometimes if the thief is in your garage, he also has access to your grinder, bolt cutters or crowbars... consider locking those tools into a cupboard to make it just that much harder... the weakest link is where they will attack, so the cables with minimum rating bring the rest of the system down to that level... Make sure your insurance covers the true value of the bikes, and check the insurance companies requirements are met regarding deadlocks, window locks, etc. Ultimately, attaching a hungry rottweiler on a short lead to the ground anchor is the best solution. Also, a webcam to get an alert on your phone and some footage for the police is a good idea too.

  • @Mark-py8sn
    @Mark-py8sn 3 หลายเดือนก่อน

    Great video, thanks. Good, clear, practical advice. Couldn't really ask for more.

  • @MotoErgoSum
    @MotoErgoSum 5 ปีที่แล้ว +1

    Tubular locks can be picked pretty easily with just a tension wrench and paper clip. Best to use a quality padlock and ideally have a MOTION DETECTION SYSTEM in your garage with an alarm. NOISE and TIME are the #1 deterrent for most thieves. If lights kick on and sirens fire up as soon as they enter the garage, that's a much bigger deterrent than any lock system.

  • @rupedog
    @rupedog 5 ปีที่แล้ว +1

    Top work Doddy... key is making it hard...its never impossible.

  • @wolfe1970
    @wolfe1970 4 ปีที่แล้ว +6

    4:54 with SDS drills you dont need to put all that weight on it to drill, the hammer in the drill does all the work for you, all you need to do is hold the drill firmly and let it drill, even the weight of the drill is enough pressure.

  • @derekhobbs1102
    @derekhobbs1102 5 ปีที่แล้ว +71

    Dust mask. I can not stress that enough.

    • @ThinkyPain
      @ThinkyPain 5 ปีที่แล้ว +15

      THIS. Silicosis is no joke.

    • @richardhaselwood9478
      @richardhaselwood9478 5 ปีที่แล้ว

      Hear hear....

    • @jamesmcfarlane4060
      @jamesmcfarlane4060 3 ปีที่แล้ว

      @@ThinkyPain 110% agree. I work with silica so masks are more than a necessity :).

  • @MrPhillipgraham
    @MrPhillipgraham 3 ปีที่แล้ว

    One Word - SOUNDBOMB!

  • @temiongcecilio
    @temiongcecilio 2 ปีที่แล้ว

    NICE. wish you've shown the final lock process on the ground anchor.

  • @martaaay774
    @martaaay774 3 ปีที่แล้ว

    Top instructional video.... I will be following this over the weekend installing my Kryptonite anchor!!

  • @Flux_Flow
    @Flux_Flow 5 ปีที่แล้ว +2

    Nice one Doddy. Been waiting on a security vid from GMBN. Wish you guys would talk about the locks themselves in detail and the chains used. Round chains vs Hexagonal shape and the diameter of lock u-shape vs cutters or grinders. Makes for a few videos I suppose. There are a lot of info out there on the subject but some not so reliable and would be a waste of money to buy junk right off the bat. Thanks again for what you guys do at GMBN

  • @magpie7791
    @magpie7791 5 ปีที่แล้ว +5

    your bike is most likely going to get stolen in a situation where you just pop in a shop for a drink! It happened to me and to other people I know.
    I always lock it even if someone says they will look after it.

  • @999_pan
    @999_pan 5 ปีที่แล้ว +1

    If you have a screed floor and a DPM you may wanna use the resin to preserve the damp membrane rather than the expanding anchors

  • @evan2079
    @evan2079 5 ปีที่แล้ว +5

    Thanks for the advice

  • @fullcarbon991
    @fullcarbon991 5 ปีที่แล้ว +2

    Great video Doddy, seems to be a big problem in the cycling industry. 👍

  • @Red1skier
    @Red1skier 2 ปีที่แล้ว +1

    Brilliant - just what I needed.

    • @gmbntech
      @gmbntech  2 ปีที่แล้ว

      Nice! Glad this helped you out! 👍

  • @Harper_and_Sineads_Adventures
    @Harper_and_Sineads_Adventures 4 ปีที่แล้ว

    Exactly the advice I was looking for. Thank you.

  • @Bushchannel
    @Bushchannel 3 หลายเดือนก่อน

    Good work sir

  • @pknark
    @pknark 5 ปีที่แล้ว +3

    As someone who works in construction, silica dust is really harmful. Always have a mask If you are drilling, cutting or jackhammering concrete for any (especially extended) amount of time

    • @Brurgh
      @Brurgh 5 ปีที่แล้ว

      i hardly think dust would do much damage from a couple of holes in a well ventilated room.... the damage from silica dust would take multiple years of contant exposure to lead to threatening damage

  • @davidsuzukiispolpot
    @davidsuzukiispolpot 5 ปีที่แล้ว

    Yes, security! A big issue with bikes. Thank you

  • @manu777tube
    @manu777tube 2 ปีที่แล้ว

    Excellent! I'm just still wondering why a 16mm drill bit for a M10 but apparently this is usually recommended so

  • @Silverhaze78
    @Silverhaze78 3 ปีที่แล้ว

    Cordless grinders with a cutoff wheel are the bane of chains and locks these days.

  • @unclealig
    @unclealig ปีที่แล้ว

    nice video. is there a video which show on how you hang up your bikes on the wall. it seems theay are hanging on the rear wheel, the front wheel has been taken off, and the handlebar has been twisted in order to save space.

  • @7shahriyar
    @7shahriyar 2 ปีที่แล้ว

    Great video, appreciate the efforts.

  • @allflats
    @allflats 5 ปีที่แล้ว +28

    Now we know why Doddy is late to a ride -- he's still unlocking his bike

  • @marcinstawczyk1836
    @marcinstawczyk1836 2 ปีที่แล้ว

    Very helpful review nice one thank you

  • @piotrlobacz
    @piotrlobacz 5 ปีที่แล้ว

    There is easy option to fix to concrete and it may not be permanent. They are called concrete screws or thunderbolts. Drill holes and they just screw into holes with no permanent inserts required. Impact gun needed to drive or remove them.

  • @OldBanHammer
    @OldBanHammer 3 ปีที่แล้ว +2

    Did the Bearing balls come with the lock to secure it after install?

  • @jackomahoney75
    @jackomahoney75 5 ปีที่แล้ว +1

    Awesome video guys loved it. 😀

  • @connorpierson2267
    @connorpierson2267 5 ปีที่แล้ว +14

    How long does it take to get one bike out, like an hour!?

    • @adampark8341
      @adampark8341 3 ปีที่แล้ว +1

      Turn key in padlock. Done

  • @nevilleroot7790
    @nevilleroot7790 5 ปีที่แล้ว

    I can definitely see the point in locking bikes in this manner for long-term storage in a less secure location but for the average, everyday use isn't it a little excessive? Wouldn't one ground anchor and an industrial chain be enough to secure bikes? Surely in most people's cases the noise of an angle grinder in the early hours of the morning is enough security?

  • @samabrams5822
    @samabrams5822 5 ปีที่แล้ว

    Dont mess with doddy

  • @MrAnon-2024
    @MrAnon-2024 5 ปีที่แล้ว

    Great video. Thanks for sharing 👍

  • @5492sparky
    @5492sparky 5 ปีที่แล้ว

    Great vid Doddy.

  • @mikuramsay
    @mikuramsay 5 ปีที่แล้ว +8

    You don't just want a plug in drill drill, you need a rotary hammer. And no, a impact gun won't cut it too. What's used in the video is a rotary hammer.

    • @oJ862
      @oJ862 5 ปีที่แล้ว

      A normal hammer drill won't hack it on concrete either, it will just slip about all over the place and create a weak hole. An SDS drill designed for concrete is pretty much the only tool for the job.

    • @mikuramsay
      @mikuramsay 5 ปีที่แล้ว

      and yes, a hammer drill is another name for impact gun

    • @bobbyhempel1513
      @bobbyhempel1513 5 ปีที่แล้ว

      @@mikuramsay no it's not.

    • @bobbyhempel1513
      @bobbyhempel1513 5 ปีที่แล้ว +1

      @@oJ862 a regular Milwaukee cordless hammer drill will drill through concrete just fine I do it all the time.

    • @mikuramsay
      @mikuramsay 5 ปีที่แล้ว

      @@bobbyhempel1513 th-cam.com/video/6UMY4lkcCqE/w-d-xo.html
      It also depends on the type of concrete
      A rotary hammer gets the job done much faster and has less chance of slipping when drilling through hard concrete. The concrete on your floor is ussually much denser and hard to drill through compared to a wall.

  • @Synnyster7189
    @Synnyster7189 2 หลายเดือนก่อน

    This is prob a dumb question but would you suggest this for a person who lives in a apt building ( i get away with parking on the sidewalk same spot everyday) i own 2 bikes and chain the wheels together but thought about using this method

  • @derekhobbs1102
    @derekhobbs1102 5 ปีที่แล้ว

    I met guy years ago that had his classic car bolted to garage floor.

  • @paulsmakingmovies1451
    @paulsmakingmovies1451 3 ปีที่แล้ว

    Very informative thanks

  • @Asbjoern
    @Asbjoern 5 ปีที่แล้ว +4

    Corded doesn't matter, the drill does.

    • @lewisheaven2365
      @lewisheaven2365 5 ปีที่แล้ว

      It does, battery ones don't have as much tourqe or power

    • @maddox4556
      @maddox4556 5 ปีที่แล้ว

      @@lewisheaven2365 get some proper tools, like Hilti. even bosch drills are better than DeWalt

    • @lewisheaven2365
      @lewisheaven2365 5 ปีที่แล้ว

      @@maddox4556 makita is perfectly fine, if you buy a corded SDS drill and a cordless SDS drill, same brand, same price (ish) the corded would be better

  • @FatEd1357
    @FatEd1357 2 ปีที่แล้ว +1

    Isn't there a risk of compromising the integrity of the damp proofing in the garage?

  • @Thepoolnewbie
    @Thepoolnewbie 4 ปีที่แล้ว +1

    May I pleased get the Amazon link to that ABUS anchor?

  • @matthewpendlebury3959
    @matthewpendlebury3959 5 ปีที่แล้ว +1

    Can you put the plugs into concrete flags under a shed

  • @stingoh
    @stingoh 2 ปีที่แล้ว

    Which model of bike wall rack are you using?

  • @Billy_W
    @Billy_W 2 ปีที่แล้ว

    What shoes are you wearing in this video?

  • @bobbyhempel1513
    @bobbyhempel1513 5 ปีที่แล้ว +1

    There are plenty of cordless hammer drills available that will do that job no problem.

  • @wongalan7020
    @wongalan7020 4 ปีที่แล้ว

    Nice video👍🏼

  • @onecho2261
    @onecho2261 4 ปีที่แล้ว

    Great video. How about on tarmac?

  • @braingasim
    @braingasim 2 ปีที่แล้ว

    My shed doesn't have a concrete foundation. It has square stones, prob 6"x6" each. Is there a good solution for this? I was maybe thinking of getting a long piece of flat metal and then secure it to several of the stones, maybe 5-8 stones and then put the anchor in the middle? Will that work?

  • @justinholmes5614
    @justinholmes5614 5 ปีที่แล้ว +7

    I dropped mine into the concrete while casting the base. You’d need a jack hammer to get it out.

  • @badlarry172
    @badlarry172 5 ปีที่แล้ว +22

    Doddy’s spent more on locks than my bikes worth
    Interesting vid though
    Ta

    • @thebadness6217
      @thebadness6217 5 ปีที่แล้ว +4

      it's kinda sad we live in a world where we need to think about and invest so much in ways to prevent ourselves from being fucked over by other people.
      I just bought an $800 entry level bike and i have $400 worth of locks just for that bike just to ride it around town and to malls every so often.

    • @mikuramsay
      @mikuramsay 5 ปีที่แล้ว

      @@thebadness6217 yeah, it depends on the country too, in my country, people damage bikes instead of stealing them or nicking parts...

    • @thebadness6217
      @thebadness6217 5 ปีที่แล้ว

      @@mikuramsay what pieces of shit.

    • @badlarry172
      @badlarry172 5 ปีที่แล้ว

      @@thebadness6217 yes sure is a sorry state of affairs

  • @BeardedPete
    @BeardedPete 11 หลายเดือนก่อน

    what if you want to install one outdoors? (I know it's not ideal but still)

  • @konamanstudio2447
    @konamanstudio2447 5 ปีที่แล้ว +2

    I guess you really don't know about Hammer Drilling you didn't wear any dust protection they do make cordless SDS hammer drills
    The silicone dust from concrete is very dangerous you think a couple holes no different heads up

  • @griswald7156
    @griswald7156 2 ปีที่แล้ว

    I use a little tile drill just to get my centres right and eliminate drill drift.before i shove in my big boys..

  • @Iowahurler82
    @Iowahurler82 4 ปีที่แล้ว

    Do NOT use a pilot hole when hammer drilling any masonry.

  • @shifter65
    @shifter65 4 ปีที่แล้ว

    Was hoping to see the final lock setup =/

  • @Trinder47
    @Trinder47 5 ปีที่แล้ว +5

    Cordless angle grinder with a 1mm cutoff disc will cut through all of the chains and the anchor

    • @_owen
      @_owen 5 ปีที่แล้ว

      Exactly

    • @MrAnon-2024
      @MrAnon-2024 5 ปีที่แล้ว +2

      Did you actually listen to what he said? The idea is to make it as difficult/noisy/time consuming as possible. Plus, an opportunist local scaly is unlikely to carry a cordless grinder.

  • @WIPEYOURLENZ
    @WIPEYOURLENZ 5 ปีที่แล้ว +1

    👍🏻 if you’ve done this but can never be arsed locking the bikes up 🤦🏼‍♂️

  • @togair9
    @togair9 4 ปีที่แล้ว

    So this cannot removed when you put them in?

  • @ComputermanAM13
    @ComputermanAM13 4 ปีที่แล้ว

    I also used epoxy all around the rawlplugs and strong thread locker on the screws 😁

  • @SteezyG
    @SteezyG 5 ปีที่แล้ว +2

    It's a shame we live in a world where this is necessary.

    • @ckmoto83
      @ckmoto83 3 ปีที่แล้ว

      well politicians/bankers etc are stealing us every day...car/bike/house thieves exist because politicians don't care about you.If they did care then a thief would spend 20 years in prison...But they dont care.Well if they steal your car/bike then you will have to buy another one so you will pay more taxes to them.Politicians love thieves.Someone stole my bike a few months ago.And now i must go to the bank to get another loan to buy another bike.So bankers must love thieves.

  • @zerdonbuarao1879
    @zerdonbuarao1879 ปีที่แล้ว

    Where i can buy

  • @JoaoFerreira-qj4zp
    @JoaoFerreira-qj4zp 4 ปีที่แล้ว

    If I buy an anchor and happen to move to other house, would it be impossible to remove the anchor without destroying the whole floor and taking it with me?

  • @Ana2398
    @Ana2398 3 ปีที่แล้ว

    I thought that these thin wired cables are the easiest to cut off.

  • @Dan_Kornfeld
    @Dan_Kornfeld 5 ปีที่แล้ว

    Unfortunately, the ground anchor is only as good as the bike lock being used with it. It doesn’t matter how secure the anchor is, if the lock, cable, chain. etc, can be cut, picked, or otherwise defeated, the floor anchor is essentially worthless.

  • @andrewcairnsmrkiplin
    @andrewcairnsmrkiplin 2 ปีที่แล้ว

    can i install one into brick???

  • @R0BBS
    @R0BBS 3 ปีที่แล้ว

    link to the anchor used?

  • @amrgardner
    @amrgardner ปีที่แล้ว

    Can an angle grinder cut those grounds anchors easily?

  • @JOE-hu9qk
    @JOE-hu9qk 5 ปีที่แล้ว

    U could of striped the threads on the alan bolts

    • @shifty2755
      @shifty2755 4 ปีที่แล้ว

      Not with a hand tool.

  • @hedemalmcarl
    @hedemalmcarl 4 ปีที่แล้ว

    6:33 just use a torque wrench for even torque

  • @russc5269
    @russc5269 5 ปีที่แล้ว

    My house is timberframe with wood floors. What to find a way of securing my bikein the house. Have no garage so its the house.

  • @Doc.Holiday
    @Doc.Holiday ปีที่แล้ว

    Chain locks are easily silently defeated with hydraulic bolt cutters. That ground anchor could be popped the same way.

  • @ethanmiller4524
    @ethanmiller4524 5 ปีที่แล้ว

    I got it g force drill today's it goes like a spastic

  • @samgodsiff
    @samgodsiff 5 ปีที่แล้ว

    Anyone else see the ground anchor settle further in the hole when putting in the ball bearings?????

  • @drifterxl12
    @drifterxl12 5 ปีที่แล้ว +1

    If motorcycles get stolen with ground anchors, I don't see why they would hold a Mountainbike. Unless you keep them mounted in your living room

  • @fakename9029
    @fakename9029 4 ปีที่แล้ว

    "Thatcher rating" seems odd. Is she perceived as that tough?

  • @larsborgman3443
    @larsborgman3443 5 ปีที่แล้ว

    what would happen if you use a hydraulic car jack with like 4t and pull it up?

    • @cup_and_cone
      @cup_and_cone 5 ปีที่แล้ว +1

      The you'd still have to figure out how to get five bikes out of a doorway that are locked together... The floor lock isn't the weak part of this system.

  • @tgfedi
    @tgfedi 5 ปีที่แล้ว

    What do you mean by registering the keys?

    • @reverendremiel
      @reverendremiel 5 ปีที่แล้ว

      Register your keys with your insurance company. (Most) Proper locks from reputable companies have serial numbers on the keys (and sometimes on the locks themselves). Note down these numbers along with the brand and make of your lock and give that to your insurance company when you insure your bike. In many cases they will forfeit your deductible if your bike is stolen whilst being locked with your registered lock/key and some insurance companies will even cover the cost of a new, identical bike (or better, if your specific brand/model is no longer available).

    • @tgfedi
      @tgfedi 5 ปีที่แล้ว

      @@reverendremiel Thank you. In my country it's very rare to find a company that will insure a bike... and it's very complicated.

  • @ChrisCapoccia
    @ChrisCapoccia 5 ปีที่แล้ว +1

    Kryptonite Stronghold looks like something an angle grinder would cut through relatively quickly… if someone is going to be burglarizing, wouldn't they bring that kind of tool? maybe you only have stupid burglars. if angle grinders are a concern, they make anchors with rollers like the Almax Defiant

    • @MrAnon-2024
      @MrAnon-2024 5 ปีที่แล้ว +1

      Haven’t you heard of opportunist thieves?

    • @ChrisCapoccia
      @ChrisCapoccia 5 ปีที่แล้ว

      If they're breaking into your garage, it's a more determined burglar

    • @MrAnon-2024
      @MrAnon-2024 5 ปีที่แล้ว +1

      The majority of toe-rags breaking into garages are opportunists looking to grab whatever they can ie electrical tools, gardening equipment, push bikes etc. to sell on. They can be in and out of a garage within minutes with something as basic as a screwdriver. They have no need to be carrying cordless grinders etc. They want to be in and out with what they can grab and be off. Someone breaking into a garage and taking a grinder with them will no doubt be doing so because they already know there’s expensive bikes in there, not opportunists which the majority will be.

    • @ChrisCapoccia
      @ChrisCapoccia 5 ปีที่แล้ว

      maybe around you it works that way… this is the first i've ever heard of people breaking into garages to steal stuff. around me, it's out of sight out of mind

    • @MrAnon-2024
      @MrAnon-2024 5 ปีที่แล้ว

      It’s country wide and more of a ‘job’ for these people, usually to feed a drug habit.

  • @no_handle_required
    @no_handle_required 5 ปีที่แล้ว +2

    So they cut the lock and chain and the floor anchor stays in place for the insurance replaced bike. hehehe. seriously though, nice setup to give the thugs something to worry about.

  • @bjorne46
    @bjorne46 5 ปีที่แล้ว +1

    So here's a thought;
    Thief comes in; tries to pick locks, and break chains... unsuccessfully .... but leaves your bikes scuffed and damaged.
    I'd rather have good insurance, and get my bike replaced I Guess.
    I do take a good lock with me on holidays, because insurance companies maybe just as bad as thieves in the end. :P

    • @cup_and_cone
      @cup_and_cone 5 ปีที่แล้ว +1

      Similar thoughts here: A thief is more likely to break a frame or cause serious damage trying to get the locks off than taking the bikes...then you end up with a broken bike an no insurance payout because they didn't steal it.

    • @justinbowyer6760
      @justinbowyer6760 4 ปีที่แล้ว

      @@cup_and_cone Problem is, if they're not locked and bolted the insurance doesn't pay out. All in the small print

    • @cup_and_cone
      @cup_and_cone 4 ปีที่แล้ว

      @@justinbowyer6760 Not true for everyone. With my homeowner's insurance (in USA), as long as it is inside my physical house with locked doors/windows, then it's covered just the same as the television, jewelry, etc. The important thing is to read (or ask) your insurer and take any precautions to ensure you're covered.

  • @brianelston7583
    @brianelston7583 4 ปีที่แล้ว

    I live in an apartment building, I would like to store my bike in my underground parking space, but there is nothing to lock the bike to. I cannot get permission to drill anywhere though... wondering if anyone has any unique ideas. was thinking cinderblocks but people could just break those...

    • @Tousain
      @Tousain 4 ปีที่แล้ว

      First thing that comes to mind.; just get some bags of concrete, and a box made of wood. Pour the concrete, let it dry, remove the wood. After that just drill in your cube of concrete. Make sure the cube is heavy though, like 50kg + with no ways to properly carry it..

  • @cup_and_cone
    @cup_and_cone 5 ปีที่แล้ว

    I'm guessing this security is more applicable to a detached garage/shed and not home? I can definitely understand locking up something with sentimental value that's irreplaceable, but if a thief breaks into our actual home (where bikes live), I think they would be far more interested in going after things like the big screen TVs, jewelry boxes, car/house/storage keys, personal financial paperwork like bank info and tax info, computers/laptops, etc. This stuff is worth far more than bikes and is enough to ruin lives.

    • @secretsquirrel4137
      @secretsquirrel4137 5 ปีที่แล้ว

      I've never had a TV worth 5k ......Jewelry box worth 3k but I've had 10k worth of bikes stolen in one hit - had to put them in the Shed for two nights whilst decorating the house. Daisy chained them together with U Locks and Motorbike chains but the lot was carried out in one hit by the thieving scumbags - talk about opportunistic. Still think someone at Evans Cycles had something to do with it as the 5k bike was 2 weeks old and obviously someone had been watching the house.

  • @zonoskar
    @zonoskar 5 ปีที่แล้ว

    What's with the wonky camera wobble and movements? Love the show, but this is gives me seasickness.

  • @kevinmontoya7318
    @kevinmontoya7318 4 ปีที่แล้ว

    I mean you got the right drill but you dont have the right vacuum

  • @homegrown5128
    @homegrown5128 5 ปีที่แล้ว

    I heard it's bad, but didn't know it's that bad.

  • @tyersonline
    @tyersonline 5 ปีที่แล้ว +1

    Just curious, why would you need a ground anchor in your garage?

    • @tyersonline
      @tyersonline 5 ปีที่แล้ว +1

      @Propaganda Blitz i mean if its in the garage, why such an anchor. Wouldnt it be better if the whole garage is set up with an alarm? Jist sayin 😎

  • @paulhusky580bts
    @paulhusky580bts 5 ปีที่แล้ว +1

    16mm or larger chain can't be bolt cropped look up SecurityForBikes.com

  • @ryansara3398
    @ryansara3398 5 ปีที่แล้ว +3

    Those cable locks are rubbish, my key snapped off in it and I managed cut my bike free is a few minutes with some cheap pliers

  • @rommiemex9532
    @rommiemex9532 3 ปีที่แล้ว

    Its a shame that jerks out there really get in our way. We just want to easily go for a ride, but even at home, you need to go crazy with the lockdowns...

  • @clenilma100
    @clenilma100 ปีที่แล้ว

    I haven't had any HUGE issues with this lock yet! th-cam.com/users/postUgkxfyHDlEqk6hqu9acdvK5NGzZsGKSokSbv It seems sturdy and like it will get the job done. I really like that it has a twisting lock feature to keep out dirt and debris. However, the mounting system is much too light for the lock, and continues to get loose/move around. It's mostly made of plastic parts, and I've had to tighten it a few times in the past week or so that I've had it. I'm worried that it's going to break off at some point while I'm riding. I'm considering just scrapping that part, but that would mean having to carry the heavy lock i my backpack and adding more weight. I wish I could have given this more stars, but without the mounting system, it's just another heavy lock that I have to cart around. UPDATE: Increased rating to 5 stars because the seller offered to provide a new lock and mounting system. Really appreciate the attention to customer service!!

  • @Silece88
    @Silece88 3 ปีที่แล้ว

    now the dyson vacuum is worthless. its not made for this kind of dust.