Sorry to be off topic but does anyone know a trick to log back into an Instagram account? I somehow lost my password. I love any tricks you can offer me!
I finally worked it out. I took out the factory metal spacer under the rail arm then cut off the two plastic nipples and then finally bolted the snorkel bracket. What a mission but came good at the end
Installed unit on Ranger 2019 Wltrak, all went well until fitting snorkel and trying to tighten bolt at the back, quite a tight manuveour. The fun started when I went to attach the roof bracket under the roof rail. Video seems to suggest that it easily fit in track, have I missed something?
Fitted it today ened up pot riveting the top bracket saved me pulling inside apart. Also kit I got sent was 100mm to long had to cut the long section to make it fit.
Sebastiaan NLD small amounts of water won’t hurt it actually. You have to suck up a significant amount. That is why Water Methanol injection works fine.
I am using this one now. When it rains and drives too fast and accidentally ran in, although there is a water outlet, it still wets my filter a little bit. I am also worried that this problem will be damaged.
@@pasindulakshan9038 I'm not sure if it will cause damage in the long term, because I have only used it for a month. Maybe I will consider changing to another model. I see a water hole on a certain model, so rain or dust will not enter directly.
@@grahamgooderacing8169 Ford manufacturer an almost identical (might even be identical) snorkel for the Everest, with the vehicle being identical to the Ranger at the front end.
Jubilee clip, what English did you speak, we Australian call it a hose clamp , did my 4”stainless snorkel and JMAX ENGINEERING air box on the piss blind drunk, Had to cut away a lot of of panel but minty
Never heard of a T7 model only the T6 if this actually is a T7 can some one tell me the difference from a T6. I suspect this is an error as it still has the 3.2l motor which is being replaced in 2022
@@grahamgooderacing8169 No idea of where your info is from but here is some from car advice Australia. 2022 Ford Ranger due to be unveiled in second half of 2021 Showroom arrival pushed back to early next year Ranger Raptor V6 likely due mid to second half of 2022 Three diesel engines across the range, two V6 outputs New platform still known as T6 rather than T7 as it is largely carryover Hybrid and/or plug-in hybrid capable on Ranger globally, Australia may follow at a later date. From April 2021
How'd you end up getting them on. Did you make any changes, to bolts? Currently installing mine, and having a shit time just trying to get bolts on. I feel as if bolts are a tad short?? Help pls
Baught a kit and installed it today. What a mission. Video's never shows the frustration when a job gets done.
Sorry to be off topic but does anyone know a trick to log back into an Instagram account?
I somehow lost my password. I love any tricks you can offer me!
@Yusuf Gannon Instablaster ;)
Will these fit a truck that doesn't have a roof rail fitted? How can the top part be secured without roof rails? Mines is a Limited
Man like mat armstrong
I had trouble with the bracket that goes under the roof rack rails. The existing bolts weren't long due to the thickness of the new bracket
I finally worked it out. I took out the factory metal spacer under the rail arm then cut off the two plastic nipples and then finally bolted the snorkel bracket. What a mission but came good at the end
Why is it i dont see this snorkle on your website?
Hey mate will this work on a px1 ranger
What did u do about the join to the main snorkel piece? It only joins with the two plastic pieces sliding together which won’t stop water
Silicone everything!
jusso b , couldn't agree more 👍
The only part they miss hahaha 😂
Installed unit on Ranger 2019 Wltrak, all went well until fitting snorkel and trying to tighten bolt at the back, quite a tight manuveour. The fun started when I went to attach the roof bracket under the roof rail. Video seems to suggest that it easily fit in track, have I missed something?
How did you end up getting this to work?
Hello
2021 install the same ?
What if your ranger has no roof racks how do u bolt top of snorkel up
Fitted it today ened up pot riveting the top bracket saved me pulling inside apart. Also kit I got sent was 100mm to long had to cut the long section to make it fit.
@@diamonddriller01 pop riveting to the roof?
I had a question: what if water from a puddle or rain enters the pipe? is there a drain built in for that?
Sebastiaan NLD small amounts of water won’t hurt it actually. You have to suck up a significant amount. That is why Water Methanol injection works fine.
I am using this one now. When it rains and drives too fast and accidentally ran in, although there is a water outlet, it still wets my filter a little bit. I am also worried that this problem will be damaged.
@@jiayuan594 hey, water coming through snorkel and will it damage engine? i have this problem
@@pasindulakshan9038 I'm not sure if it will cause damage in the long term, because I have only used it for a month. Maybe I will consider changing to another model. I see a water hole on a certain model, so rain or dust will not enter directly.
nice simple easy to follow steps, thanks legend
Um abraço aqui do Brasil! Esse vídeo me ajudou muito 👊🏼👊🏼
how do these things hold up in the sun? does the colour tend to fade?
Does this fit a 2019 PX3 Wildtrak as I like that you do not have to cut up the car.
Uk model only
Is this the same as an Ironman 4x4 snorkel?
Will this work on the 2.3 liter American version
Im interested to know this as well.
Its only suitable for UK version
Will this fit on a 2021 US built Ranger?
the connection to the air box doesn’t fit . can someone tell me what they done .
cross head screw driver, whats one of them.
pozidrive or Phillips head
What's the sensor in the front arch lining for?
The T7 model does not have a sensor
digital radio antenna
Could you put this snorkel on a Ford Everest
Suitable for Ranger only
@@grahamgooderacing8169 Ford manufacturer an almost identical (might even be identical) snorkel for the Everest, with the vehicle being identical to the Ranger at the front end.
Hi.
Can this snorkel be fitted onto Mazda BT-50 year 2014?
Jubilee clip, what English did you speak, we Australian call it a hose clamp , did my 4”stainless snorkel and JMAX ENGINEERING air box on the piss blind drunk, Had to cut away a lot of of panel but minty
Never heard of a T7 model only the T6 if this actually is a T7 can some one tell me the difference from a T6. I suspect this is an error as it still has the 3.2l motor which is being replaced in 2022
T6 - 2012-2016
T7 - 2016-2019
T8 - 2020- ONARDS
@@grahamgooderacing8169 No idea of where your info is from but here is some from car advice Australia.
2022 Ford Ranger due to be unveiled in second half of 2021
Showroom arrival pushed back to early next year
Ranger Raptor V6 likely due mid to second half of 2022
Three diesel engines across the range, two V6 outputs
New platform still known as T6 rather than T7 as it is largely carryover
Hybrid and/or plug-in hybrid capable on Ranger globally, Australia may follow at a later date.
From April 2021
Now i get it why people choose safari snorkels over this
The name Safari means an extra few $100 ! Go ahead.
Baby Matt 🤔😊
better to put first the snorkel before installing the fender
corrected!
How'd you end up getting them on. Did you make any changes, to bolts? Currently installing mine, and having a shit time just trying to get bolts on. I feel as if bolts are a tad short?? Help pls
@@wuxsta3099 I have the same friken problem
@@wuxsta3099 Use longer bolts to fit it and compress the foam, then replace them one by one with the supplied bolts
all drilled holes shall also be protected from rust, deburring (which is good) isn't good enough.
Literally says in the video use rust prevention
@Robdutton91 in all fairness I didn't realize he did so. If he did he was right in doing so.
Matt ! 😂😂😂😂😂😂👊
It looks putrid, well better than a new engine
How to fit a snorkel to a ranger.
Step one: sell the ranger