Did you solve it?. Beside do you know about this error " 1 package failed: micro_ros_agent 1 package aborted: ros_gz_bridge 2 packages had stderr output: micro_ros_agent ros_gz_bridge 2 packages not processed "?
I have a problem with the colcon build in the minute 25:45. When I do it there are two problemas. First, sometimes my laptop is crash and second terminal showed this error " 1 package failed: micro_ros_agent 1 package aborted: ros_gz_bridge 2 packages had stderr output: micro_ros_agent ros_gz_bridge 2 packages not processed " Do you know what happend?
13:50 colcon build --packages-up-to ardupilot_dds_tests --cmake-args -DBUILD_TESTING=ON, this command is different from the one in website and it gives error for both.
hey, try running this in your terminal python3 -m pip install -U setuptools python3 -m pip install -U colcon-common-extensions This should fix your problem.
Thank you for the explanation, really appreciate it. when I run the following line (ros2 launch ardupilot_gz_bringup iris_runway.launch.py), I just get blue sky in Gazebo, instead of runway, can you please assist me on this?
When I execute this command (./waf configure --board MatekF405-Wing ) it gives the err, And the error code is AttributeError: 'NoneType' object has no attribute 'abspath'
7:57 your action is hidden (( no cursor, no any info what happen and what press after "ros2 run turtlesim turtlesim_node"... just close blue window? UPD. Ctrl+C...
Thank you so much. I am a complete noob in this thing I want to know how to get a full simulation based on pixhawk and things so that If I give the waypoints it will through the environment
Hi, thanks for the video, at 35.38 when looking for "ros2 topic list", ardupilot topics shall also be seen right? like ap/cmd_vel, correct me if I'm wrong. Thanks
Hello! Thank you so much for the video it worked for me but as you warned gazebo does not work with VMWare, the problem is that I have a Mac so I couldn't use VM ware workstation as you advised. What do you think I should do, run it using a dual boot and installing ubuntu natively. Does gazebo require that much graphic power, what graphic card do you need on windows to run it ? Thanks a lot !
Hello! Thanks for watching. For your Mac, dual booting with Ubuntu is a good idea. Gazebo runs well with mid-range graphics cards like NVIDIA GTX 1650 on Windows. Hope this helps!
Perfect I will try this !! Thanks so much@@xiaoditao Do you have any social Network (linked in, instagram etc.) where we could connect, it would be nice to discuss a bit more about the autonomous drone project I m doing with a friend ?
25:41 when i try to run that command my screen got freezed after 11/13 completion. So how can i solve this
Did you solve it?. Beside do you know about this error " 1 package failed: micro_ros_agent
1 package aborted: ros_gz_bridge
2 packages had stderr output: micro_ros_agent ros_gz_bridge
2 packages not processed
"?
You are probably running out of RAM, which is causing a crash. Try this command: colcon build --parallel-workers 2
Thank you so much. It's really nice of you to show show the detailed procedures.
Amazing man. you are a super hero. this helped me a lot. Receive this thanks all the way from USA. Awesome. Please keep bring these videos.
I have a problem with the colcon build in the minute 25:45. When I do it there are two problemas. First, sometimes my laptop is crash and second terminal showed this error " 1 package failed: micro_ros_agent
1 package aborted: ros_gz_bridge
2 packages had stderr output: micro_ros_agent ros_gz_bridge
2 packages not processed
"
Do you know what happend?
13:50 colcon build --packages-up-to ardupilot_dds_tests --cmake-args -DBUILD_TESTING=ON, this command is different from the one in website and it gives error for both.
Did you find a solution,cause I am having the same error
hey, try running this in your terminal
python3 -m pip install -U setuptools
python3 -m pip install -U colcon-common-extensions
This should fix your problem.
@@sakshinkanchibail8859 I ran these commands and the build still fails. The ardupilot_msgs failed. Any suggestions? Thanks
Thank you for the explanation, really appreciate it. when I run the following line (ros2 launch ardupilot_gz_bringup iris_runway.launch.py), I just get blue sky in Gazebo, instead of runway, can you please assist me on this?
When I execute this command (./waf configure --board MatekF405-Wing ) it gives the err, And the error code is AttributeError: 'NoneType' object has no attribute 'abspath'
Did you solve it?
same,unsolved
me too :(((
Use command:
git submodule update --init --recursive
Then run:
. /waf configure --board MatekF405-Wing
It should work😊
@@pratikkumarbhanwala9662 it worked !!!!!! thank you
I couldn't get this to work. July-24. Note: there are changes in web pages shown in video. I believe tutorial is obsolete.
7:57 your action is hidden (( no cursor, no any info what happen and what press after "ros2 run turtlesim turtlesim_node"... just close blue window? UPD. Ctrl+C...
Yes, I just closed it by pressing Ctrl+C.
Thank you so much. I am a complete noob in this thing I want to know how to get a full simulation based on pixhawk and things so that If I give the waypoints it will through the environment
Why does my ros2 topic list have no imu?
Hi, thanks for the video, at 35.38 when looking for "ros2 topic list", ardupilot topics shall also be seen right? like ap/cmd_vel, correct me if I'm wrong. Thanks
Hello! Thank you so much for the video it worked for me but as you warned gazebo does not work with VMWare, the problem is that I have a Mac so I couldn't use VM ware workstation as you advised. What do you think I should do, run it using a dual boot and installing ubuntu natively. Does gazebo require that much graphic power, what graphic card do you need on windows to run it ? Thanks a lot !
Hello! Thanks for watching. For your Mac, dual booting with Ubuntu is a good idea. Gazebo runs well with mid-range graphics cards like NVIDIA GTX 1650 on Windows. Hope this helps!
Perfect I will try this !! Thanks so much@@xiaoditao Do you have any social Network (linked in, instagram etc.) where we could connect, it would be nice to discuss a bit more about the autonomous drone project I m doing with a friend ?
@@julesbld This is my Instagram: instagram.com/xdttao/
I have an error with AR_RCTelemetry file who can help me?
Thank you so much
why didn't you consider using GAZEBO 9 OR GAZEBO 11
Gazebo 11 is very old and needs to run on Ubuntu 20.04 or earlier. I have found many of tutorial are out of date and no longer work.
mate can i run this using WSL ubuntu 22.04?
The Gazebo simulation on WSL may have limitations in terms of graphic processing, but this is just my speculation.
@@xiaoditao yeah you were right. i've tried, bunch of errors on qt module
@@xiaoditao anyway if i want to use it on rover how to replace quadcopter with rover?
why we are using gazebo garden , can we use gazebo 11 if we can how ?
Gazebo 11 is very old and needs to run on Ubuntu 20.04 or earlier. I have found many of tutorial are out of date and no longer work.