One thing I really like about this is that it doesn't use klipperscreen so you can have a more minimal build on your printer. I'm running the btt pi 1.2 only printers and that doesn't lead to the highest performance. When I removed klipperscreen and went with this I noticed better connection quality from my printer.
Hi, thanks for all your videos, very informative . sorry to be off topic, i have preached a 3dchameleon , and was not able to use it with my prusa 3.9 , not much info , videos on this applications. i am visioned impair and running on linux , i would like to use the 3dchameleon with my creality k1 max and i am using ORCA-SLICER. Can i use orca-slice as if it was prusa slicer. thank you so much
Thanks for watching! I am not that familiar with Orca yet, but prusa slicer gives you lots of options to control the filament change. I will have a closer look at Orca.
First, thank you for awesome videos to help new Klipper converts, like me. Would you consider doing a video on the Next Steps? I'm not clear on the sequence of getting from the Klipper install to good prints. Is this the sequence? 1. Z offset 2. Tilt screws adjust 3. Bed mesh 4. Orca calibrations 5. Tuning with the adxl gizmo Thank you!
I have a ultramaker 3 printer. What would be a good controller to replace the ultimaker one with. It is 2 head, printer. Doing a episode on doing generic upgrades for older good printers that are no-longer supported.
That's a good question Ultimaker was kind of there own animal, not sure what would be compatible. I do have some videos in the works where we do strait up swap outs to make bad machines better.
My guess is a good mother board and Merlin or the combo setup used on Vorons but not driven as hard. For Ultimakers a new hot end setup would be useful as their heads wear out (mine is getting that way). The UM have NFC readers for filament that some use but it is optional.
BTT are really good with firmware updates and implementing users feature requests. The Panda Touch has got a whole lot better since it's initial release. You can buy a spare USB dock for about $19 so you can take the Touch in to a different room and just dock it, rather than messing about with switches etc, which is probably a good idea as the battery life is pretty poor. The Panda Touch firmware is currently on version 1.0.6 . Apparently 1.0.7.1 will have larger thumbnails so maybe they will do the same to the K-Touch.
Looks promising, will see what features they add. The limit I see is that it only supports Klipper. I have a Prusa, a Bambu and a MagnetoX along with 3 Rat Rigs, that I can control all with a small PC, dual displays a keyboard and mouse.
It should have a third switch option which enables a magnetic switch and automatically switches to battery mode when undocked. It would still reboot but much less fiddly. Personally I recommend using an inexpensive or repurposed tablet and the web interface but it's good to have other options.
I have both the panda and k touch. I was going to just convert the panda but it got delayed so long and when it did come out it had no clear instructions on how to do it. So I just bought the k touch. Now what do I think of it...meh. I kind of find it useless. I have a Pi and btt 5 inch screen and a btt pad 7 and I much prefer klipper screen. I know they are not the same but I was hoping to get way more options. Like macros, multiple fan control etc. So I hope BTT adds options soon
In 5V mode, does it charge the battery? Who designs things that way 🤔 It shouldn't be difficult to use 5V to charge and balance the battery when docked, and run all the time from the battery.
battery management in 2024 shouldn't be a thing manually. Lipo's should only be charged to 80% EVER! Shouldn't matter if it's running on the dock or not.
One thing I really like about this is that it doesn't use klipperscreen so you can have a more minimal build on your printer. I'm running the btt pi 1.2 only printers and that doesn't lead to the highest performance. When I removed klipperscreen and went with this I noticed better connection quality from my printer.
Nice, good call out, it being lighter is an advantage for sure.
It has potential, it would be amazing if Happy Hare could be installed to control the ERCF.
That would be cool! We will see what they do. Fingers crossed.
Hi, thanks for all your videos, very informative . sorry to be off topic, i have preached a 3dchameleon , and was not able to use it with my prusa 3.9 , not much info , videos on this applications. i am visioned impair and running on linux , i would like to use the 3dchameleon with my creality k1 max and i am using ORCA-SLICER. Can i use orca-slice as if it was prusa slicer. thank you so much
Thanks for watching! I am not that familiar with Orca yet, but prusa slicer gives you lots of options to control the filament change. I will have a closer look at Orca.
only if we didnt have something that could fit in our pockets and carry with us anywhere. This product would be great.
Agreed, it's hard to be the readiness of the phone.
First, thank you for awesome videos to help new Klipper converts, like me. Would you consider doing a video on the Next Steps? I'm not clear on the sequence of getting from the Klipper install to good prints. Is this the sequence?
1. Z offset
2. Tilt screws adjust
3. Bed mesh
4. Orca calibrations
5. Tuning with the adxl gizmo
Thank you!
Thank you! I have some other Klipper setup videos like this, but yes, you have the order correct of how I would do it.
I have a ultramaker 3 printer. What would be a good controller to replace the ultimaker one with. It is 2 head, printer. Doing a episode on doing generic upgrades for older good printers that are no-longer supported.
That's a good question Ultimaker was kind of there own animal, not sure what would be compatible. I do have some videos in the works where we do strait up swap outs to make bad machines better.
My guess is a good mother board and Merlin or the combo setup used on Vorons but not driven as hard. For Ultimakers a new hot end setup would be useful as their heads wear out (mine is getting that way). The UM have NFC readers for filament that some use but it is optional.
It would be great if the USB could store firmware for switching Klipper\bambu at any time
I hope we see that as a feature soon.
BTT are really good with firmware updates and implementing users feature requests. The Panda Touch has got a whole lot better since it's initial release. You can buy a spare USB dock for about $19 so you can take the Touch in to a different room and just dock it, rather than messing about with switches etc, which is probably a good idea as the battery life is pretty poor.
The Panda Touch firmware is currently on version 1.0.6 . Apparently 1.0.7.1 will have larger thumbnails so maybe they will do the same to the K-Touch.
Agreed, it been a while since I did this one, I need to go check and see if there is anything new.
Does this work with the BTT PWR like the Panda Touch does? Do you plan to do a review of the PWR?
Haven't seen that yet, we will see if they send one to check out!
Looks promising, will see what features they add. The limit I see is that it only supports Klipper. I have a Prusa, a Bambu and a MagnetoX along with 3 Rat Rigs, that I can control all with a small PC, dual displays a keyboard and mouse.
Agreed, not enough features and really only good in a Klipper farm.
It should have a third switch option which enables a magnetic switch and automatically switches to battery mode when undocked.
It would still reboot but much less fiddly.
Personally I recommend using an inexpensive or repurposed tablet and the web interface but it's good to have other options.
Yeah, the power switching is a bit clunky for sure.
I have both the panda and k touch. I was going to just convert the panda but it got delayed so long and when it did come out it had no clear instructions on how to do it. So I just bought the k touch. Now what do I think of it...meh. I kind of find it useless. I have a Pi and btt 5 inch screen and a btt pad 7 and I much prefer klipper screen. I know they are not the same but I was hoping to get way more options. Like macros, multiple fan control etc. So I hope BTT adds options soon
I am with you, I think "meh" says it all. Looking forward to see what features they add.
How much is a pi zero 2w + touch screen to run KlipperScreen?
These Pi screens can be pricey, but you can probably get it done for about the same price.
In 5V mode, does it charge the battery?
Who designs things that way 🤔 It shouldn't be difficult to use 5V to charge and balance the battery when docked, and run all the time from the battery.
Agreed, the way they did it is a bit confusing. It does charge in 5v.
Used laptops are so cheap, and do so much more.
Agreed, those are fun projects as well.
It looks like they've repurposed the Panda Touch hardware into the K-Touch.
They did say they were going to do exactly that (due to the risk of bamboo changing their setup at anytime they want)
That's exactly what they did
Yes, trying to get more life out of the device.
I was very disappointed in the k touch. 😢
Yeah, it needs more for sure. We will see what they do.
@ChrisRiley they pushed a small update, at least you use the usb on the side now.
battery management in 2024 shouldn't be a thing manually. Lipo's should only be charged to 80% EVER! Shouldn't matter if it's running on the dock or not.
Agreed, this part kind of confused me.
Stopped watching when he couldn't read specs he was showcasing. "800x600 resolution"...clearly says 800x480 as he is reading/showing. fail.
Nice comment