Just a couple of tips for the people. Make sure that a ceiling fan or any type of airflow is off. You do not want dust to make its way on the screen after you use the sticker. Do not put anything over the tablet's screen that can cause dust to fall on it. You will know how the screen protector goes based on the camera cut out on the screen protector. Use that to know how the screen protector goes. Basically the most important thing to installing any screen protector is to avoid dust from getting trapped in between the screen and the tempered glass. On smaller screen protector, if you do have dust that is trapped underneath the tempered glass you can lift up a corner (MAKE SURE YOUR NAILS ARE CLEAN because if they aren't clean they will leave whatever is under your nail on the glass and it will not go back down) and use the stickers that came with the kit to go under the glass and stick it on and peel it off to remove the dust.
A lot of people also like to do this in a bathroom. Run the hot water in the shower. The steamy environment will help control the dust for a clean application.
@@deanquinto3207 Yup. I do this with all my screen installations. Did this with my recent install for the S8 ultra with the Spigen last week. Worked really well.
A lot of people also like to do this in a bathroom. Run the hot water in the shower. The steamy environment will help control the dust for a clean application.
Just some feedback about Spigen: Multiple people who ordered their Tab S8 Ultra screen protector on Amazon received used products that had previously had the film lifted and re-attached. When I ordered one, I received a box that had been opened but the glass itself looked untouched. After applying it, I found that it didn't sit flat on the bottom left corner due to a defect in the glass (it wasn't cut correctly, or it's not perfectly flat for some other reason), so it lifts up a little there. When I went back on Amazon to request a replacement, I found it was no longer available on Amazon, so I contacted Spigen directly asking for a replacement directly from them. After sending a photo of the issue, they agreed to send me a replacement, but then 3 days later, they emailed me saying that they were out of stock and didn't know when they'd be back in stock (making it sound like they were going to be out for quite some time). Due to this, they told me that they have decided to refund me on Amazon instead and did so. Only THREE days later, I found that the item was available on Amazon again, SHIPPED AND SOLD by Spigen directly, but now listed at a much higher price than I had originally paid. Essentially they're forcing me to buy it at a higher price now. When I emailed them back to point this out, they gave me a non-answer about how Amazon is a competitive marketplace, and that prices may change (refusing to acknowledge that just days ago they were acting like they're not going to see new stock for ages and refunded me without my consent). When I tried to point this out again, they stopped responding to me, and it's now been almost a week with 0 word from them. I just feel that people should know this.
Oh my, that sucks so bad! That's not cool of them at all, I'm sorry they're putting you through all of this. That's really odd for Spigen to do, they're known for usually being pretty legit. I totally believe you though, I"m seeing a few negative comments starting to get posted on Amazon, I just checked now. That's very unfortunate, because the install "thingy" you rest the tablet in makes for a super clean install. Thankfully I'm starting to see a ton of other options coming in cheaper, so it might be a good idea to just bite the bullet and use one of them. You could probably use that same install "thingy" with it too, so that might work out okay. I'd pick up one of the cheaper 2 packs if they're out for the Ultra. I might end up doing that as well, since I had to pull this one off. There was 1 speck of dust that I didn't see when doing the install on camera, and the air bubble around it just wouldn't go down, so I'm running it naked now too. Makes me feel a bit nervous, that's for sure. Thanks for watching and sharing your insight with everyone, it's greatly appreciated.
@@RADERTECH I want to give them the benefit of the doubt too because I typically hear great things about them from others, although I personally (as far as I remember) have never used their products before. I don't really blame them for the used item issue, because I've had this kind of issue with Amazon-fulfilled orders before (I ordered a "new" $300 PSU from Amazon once, only to receive one that had not only been previously opened, but whoever did so took the $300 unit and replaced it with their cheap < $100 unit prior to returning it. That's not good of course, but it should have never been my issue to deal with as Amazon shouldn't have sent me a returned unit that was opened when I'm ordering something advertised as "new"). But going almost a week with no response is . . . less than ideal. And I'm not happy that they processed a refund with no confirmation from me, or even asking if I'd be ok with waiting until they had stock.
@@joon0 I feel your pain. I once bought a $300 ready to fly freestyle drone from them, and it was dead on arrival. I can tell someone had messed with it too. Amazon does a lot of shady crap, that's why I never feel bad when I return stuff without any real good reason, other than changing my mind. They make so much money and work their workers to death in some locations, literally. They're like one of those necessary evils we have in the world, lol.
@@fallback8314 I would still recommend it, but the price has sky rocketed! They're asking $35 for it now, no screen protector is worth that cost. It was like $10 to $15 cheaper than that when I made this video. I think there was a bad batch or 2 in the early goings, or somehow they were getting mangled at Amazon (returns, mishandled, not sure) and a few folks had problems with them. Considering the price hike, I'd probably go for something like this - www.amazon.com/Samsung-Galaxy-Ultra-Anti-Scratch-Case-Friendly/dp/B09P4Q5W2V/ref=sr_1_1_sspa?keywords=spigen%2Btab%2Bs8%2Bultra%2Bscreen%2Bprotector&qid=1650467898&sprefix=spigen%2Btab%2Bs8%2Bultra%2Caps%2C166&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWks0MTRHU1laWTVZJmVuY3J5cHRlZElkPUEwMjMwNjU3MUtZV1FGTjFISVcxUSZlbmNyeXB0ZWRBZElkPUEwMjAzMTA4Q0pVRklTNENLSE5OJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 You get 2 of them (in case you mess up while installing the first one), and there's a promo code taking them down to under $19. Looks like it's getting good reviews as well. I'm just shocked by how much they're charging for the Spigen one now, definitely not worth $35.
I like the cover, but I honestly think that screen protectors shouldn't be necessary for most tablets or phones that use Gorilla Glass 5. However I imagine that the larger sized Ultra is probably going to be more likely to slip and fall. And if it did fall it's size and weight (still lighter than an iPad Pro!) could potentially cause damage to the screen. When it comes to scratches, even on my very low to mid-range phone (Redmi Note 8T) which also has Gorilla Glass 5, after 2 years of constant use and many, many drops, it still doesn't have a single scratch or screen imperfection. So, I'm not planning on using a screen protector on Tab S8 Plus. Having used one on a previous budget tablet, despite many attempts, I came to the conclusion that it is impossible to fit a screen protector without it being visually noticeable. Maybe that was just the brand of screen protector I used, who knows? Anyway, thanks for the vid!
Hi Paul, thanks for stopping by and watching and for sharing your insight. I know screen protectors are hit and miss with most folks, I'm someone that's on the fence myself. This particular one was a perfect fit (rare) using the guide thingy it came with, but I ended up having a couple specks of dust that didn't show on camera, and end ended up having to remove it, so I'm back to not using one as well. Just be careful with the keyboard cover rubbing up against it when it's closed, those nubs can dig in after time, but I don't think they'd cause anything more than superficial surface scratches that nobody would be able to really see anyways. I do like the peace of mind they give for some reason, but that's just a mental thing, lol. Thanks for watching 👍
I just got a tiny crack in tab S7 screen when it feel face first onto a tiled floor. Wish I had a screen protector though my case has a small lip. It's a minor crack but still.
@@RADERTECH My pleasure. My other issue with screen protectors are that even Samsung recommend not using one if you're going to use fingerprint recognition. I'm finding facial recognition too hit and miss, so that's a must for me. I haven't received the keyboard cover yet, but thank you very much for bringing that to my attention, it wasn't something I'd even considered! I bought a decent clip-in folio book cover today which will probably end up being my main cover, I'm just going to sell the free Samsung one. Keep up the great videos and the much appreciated personalized replies!
Very helpful and nicely presented. But consider re-shooting with lighting so that when your hand is over the screen using the squeegee your hand isn't completely in shadow. It's impossible to see what your doing at that critical point of the install.
Thank you so much for your inputs and suggestion. Yeah, the lighting was pretty bad in this early video, there's been some improvements since this came out. Thanks for watching.
I got one from Amazon as well and mine came opened already. The protector appears fine but for 30 bucks it shouldn't come messed with. It's a common occurrence if u read the Amazon comments. Thanks for sharing!
Thank you so much for watching. Another person commented saying the same thing, it's very frustrating to know that's happening. Thanks for sharing, sounds like it's worth avoiding Amazon for them, what a bummer.
@@RADERTECH Your welcome, yes it's a bummer, and I hope it goes on fine once I receive my tablet. There is another youtuber who did installation and tests with several screen protectors for the Tab S8 ultra with drop tests and fingerprint sensor and s pen checks etc... The final one was this Spigen protector and it faired the best out of all 11 of them. It seems like it's worth the money, if mine has an issue I will buy another but not from amazon. I don't know how amazon can ship items that have been opened and tampered with!
When I put any screen protector on I do it in the bathroom with the shower on hot helps keep any little dust from landing back on the screen. Works great
Yes indeed! That's a great tip, thanks for sharing this with everyone. My apologies for the slow reply, I've been away for a couple eye surgeries. Thanks for stopping by.
As great as the tab S7+ is, you're going to LOVE the Ultra! Cameras and face unlock are way better, the look and feel just feels more modern, and that screen.... I'm telling you, it's a sight to behold! My only gripe is that that pixel density is a bit lower than the S7+, but you can't really tell unless you have your face right up to the screen. It's a great machine! Thanks for watching 👍
You explain things really well. Do you have any issues with the screen protector such as bubbles, dust,cleaning or writing on the screen or the tablet recognizing your fingerprint?
Thank you so much for watching! As long as you take your time and are patient, you shouldn't have any problems. You may have a few bubbles for a few days, but they almost always work themselves out. Just be careful to make sure there's no dust at all when applying it. As far as writing goes, it feels about the same, just a bit more slippery, if that makes sense. For the fingerprint reader, it will be touch and go for the first week or so. Make sure to re-register your fingerprint a couple times, and then once more after about 10 days or so, and then it should be great from there on out.
Go to setting, then Notifications, and switch it to Brief from Detailed. Then in Brief popup settings, enable notifications when the screen is off. It's an on/off toggle. Thanks for watching!
I think so, it's definitely an improvement over the tab s7+. Once you install a screen protector though, it will take about a week to completely settle in, then you'll want to re-register your fingerprints. It should be smooth sailing from there. I rarely use it though, because the face unlock has been drastically improved over the s7/s7+ and works almost 100% of the time. Thanks for watching.
Does anyone know if there a way to use a usb hub or a dock so I could connect a monitor and other peripherals and charge it at the same time? Thank you!
Hi Peter. Yes sir, they do. You'll want a USB hub that offers Pass-Thru power. An example would be the Anker 341 USB hub as a budget option. Just be careful and read reviews before buying, some have been known to overload USB ports and it can actually fry them. It happens to Mac's often, but seems to be less of an issue for Windows and android devices. Thanks for watching.
I'll keep this short...I love, love, LOVE this tablet. th-cam.com/users/postUgkxLNmVocUk8tnSkwWIlYSNFzWRIaFTBuzS The picture quality is amazing and there are so many features that this technodino can't wait to learn! My only (very, very minor) complaint is that I ordered this in bronze and they sent me black. Yes, it should have been corrected, but we were only in country for a short period of time and I didn't want to run the risk of not getting a new one in time. I'm such a fan of Samsung Galaxy tablets that I'd rather suck it up than lose out on having it. In the big scheme of things, this rates an irritant factor of .0000000001 out of 1000. In other words, I'm not looking at the colors when I use it, so I got over it very easily.
After you put the screen protector , is the screen clear as if you dont put the protector ? I mean is the quality great. I remember some brand screen protectors have bad quality where the screen, end up looks foggy
Thank you so much for watching. I know what you mean, they can get a little cloudy looking. No, not for this one here, especially after it's on for about a week. I had to take mine off though because a tiny air bubble formed around a spec of dust. The price you pay for doing an install on camera, lol. After about a week, you'll want to re-register your fingerprints. There's a ton of other screen protectors now on Amazon for much lower prices, I'd probably start with one of them.
It's about the same, except the screen will feel a little more "slippery", so to speak with it on. Some artists hate it and will refuse to use a protector for that reason, and many don't mind it all. As far as the s pen input registering accurately, it's totally fine, I can't tell a difference. Just make sure to use a screen protector that's no more than .33mm thick as then it might start to have problems. Thanks for watching.
Very good point Ben, it definitely is very slippery. I still have the original screen protector that it shipped with on, so I have yet to feel the actual glass, lol. One of these days it will eventually wear out. Thanks for sharing your insight and for watching.
Thanks for stopping by and watching. No, I'm afraid it doesn't come with one installed like the s22 and Fold 3. Enjoy the Ultra, you're going to love it!
Only during the first or week or so while it settles. After that it should work just the same, just the screen will feel a bit more slippery, if that makes sense. Thank you so much for watching.
Where the third party case covers and screen protectors for it I don't see it any I checked on Amazon , Google don't see any I don't Wana order Samsung
Here's a few.... 1. www.amazon.com/Zeking-Designed-Anti-Scratch-Silicone-Protective/dp/B09SCPPDN2/ref=sr_1_4?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-4 2. www.amazon.com/Samsung-Galaxy-Ultra-Anti-Scratch-Case-Friendly/dp/B09P4Q5W2V/ref=sr_1_2_sspa?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSVZTTlFLVUVTUFpMJmVuY3J5cHRlZElkPUEwOTQ3NjA0M0JMTkQ1WE9PSklMSiZlbmNyeXB0ZWRBZElkPUEwMTU5OTgxM0paTjlGNVM5Szk3TSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= 3. www.amazon.com/SanMuFly-Samsung-SM-X900-SM-X906-Creative/dp/B09TFV1MKF/ref=sr_1_5?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-5 4. www.amazon.com/SanMuFly-Samsung-SM-X900-SM-X906-Graffiti/dp/B09THF8K8H/ref=sr_1_6?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-6 5. www.amazon.com/MOOISVS-Compatible-Samsung-Galaxy-Transparent/dp/B09SYKNQLF/ref=sr_1_10?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-10 You'll see a lot more pop up within the next 2 weeks. Thanks for watching.
According to a couple reddit posts, it will work, but you'll have to make the camera cutout a tad bit bigger with a knife in order to fit the new camera notch. Sounds like it's a tiny bit bigger on this year's model. Thanks for stopping by again, appreciate you!
There's no real impact other than the s pen just feels different compared to not having it on. I don't notice any reduction in the sensitivity, it just feels different. Not in a good or bad way, just different. Thanks for watching!
I added a couple in the description for you. Looks like it's currently sold out everywhere I"m seeing, but that will sure change soon. Thanks for watching.
Hmm, I've never heard of that before. You shouldn't come across any problems using it with OLED or any other type of panel. There's the layer of glass between the panel itself and the screen protector, so there shouldn't be any problems. You should be fine. Thanks for watching.
@NINJA THEORY I'm with you. I'm so OCD about micro scratches and scratches in general, they drive me nuts! To me, it's totally worth taking the time and putting in the effort to do a nice screen protector install. I've never once had an issue, including fingerprint recognition and s pen use - it all stays the same. Thanks for sharing your thoughts on it :)
@NINJA THEORY my freind told me this. He pre ordered s22 ultra. I pre ordered s8 tablet. When i was looking for screen protector for my tablet he said dont put screen protector it will kill the beauty of oled screen. I also heard this concept 1st time in my life. Haahaa
@@GuguPoems I hope you don't mind me chiming in, I know this was intended for NINJA THEORY. You won't notice any degradation in screen quality or the appearance of things on the screen at all. Please keep in mind that when you install a screen protector, it's not set in stone or anything. What I mean is that you can very easily remove it, it literally takes 5 seconds to do, so you have that option if you're not totally happy with it. Removing it won't harm your device at all. Just lift up one corner with your fingernail and it will pull right off and won't leave anything behind. Give it a nice wipe down with a screen wipe and you won't even know it was ever there. Just sharing my experience of putting well over 100 of these on devices. Most of my extended family asks me to do theirs because they get nervous about it. Just take your time and make sure you keep your heater or A/C unit off during the install, as it might blow some dust on your screen that you can't see during the install.
@RADER TECH i will go with screen protector. I will not take risk leaving my tablet without protector as i never had any device where i did not put screen protector. Thanks for good tips you shared
I honestly don't recommend this screen protector, have ordered it 2 times, and is impossible to not get air bubbles, even though you have the guide to help you, air bubbles still remain, and is impossible to get rid of them, and finally decided to take it off.
Sorry for the slow reply. Yeah, it can be real pain, especially on a tablet this size. I personally don't use screen protectors, outside of doing an occasional video on them.
I know, it sucks. The worst part is that when you use the back part of the keyboard as a kickstand, the bottom of the tab is complete exposed and rubs against whatever you set it on. They really need to rethink it. I'm giving away a bumper case that protects the back and sides, check on the latest video I posted if you think you might like it. Thanks for watching.
Nice! Glad they're back in stock, they've been sold out since right after I ordered it. Just be very careful with dust when installing it. As another commenter mentioned, make sure your heater/AC unit is turned off, and that you triple check the screen for dust particles as your installing. I ended up having to remove mine because one little speck of dust was causing one air bubble not to settle. It wouldn't have happened if I was doing it off camera and looking closer, the price was paid for making a video, lol! The best part about this screen protector is the fit - it aligns perfectly with the alignment tool they give you, it really does help a lot. Thanks for watching.
Just a couple of tips for the people.
Make sure that a ceiling fan or any type of airflow is off. You do not want dust to make its way on the screen after you use the sticker.
Do not put anything over the tablet's screen that can cause dust to fall on it.
You will know how the screen protector goes based on the camera cut out on the screen protector. Use that to know how the screen protector goes.
Basically the most important thing to installing any screen protector is to avoid dust from getting trapped in between the screen and the tempered glass.
On smaller screen protector, if you do have dust that is trapped underneath the tempered glass you can lift up a corner (MAKE SURE YOUR NAILS ARE CLEAN because if they aren't clean they will leave whatever is under your nail on the glass and it will not go back down) and use the stickers that came with the kit to go under the glass and stick it on and peel it off to remove the dust.
Pinned again, not sure what happend to your original comment. This is good info, thank you!
A lot of people also like to do this in a bathroom. Run the hot water in the shower. The steamy environment will help control the dust for a clean application.
@@deanquinto3207 👊👍
@@deanquinto3207 Yup. I do this with all my screen installations. Did this with my recent install for the S8 ultra with the Spigen last week. Worked really well.
A lot of people also like to do this in a bathroom. Run the hot water in the shower. The steamy environment will help control the dust for a clean application.
Great suggestion, thank you👊👍
I tried this technique and wow it worked really well like there was no dust bubbles
Yesterday i bought my first tab and it's Samsung galaxy tab s10+ and this video really helped me thank you so much ✨🎀
Congrats on getting the galaxy tab S10+, that's awesome! I'm glad this was helpful.
Just some feedback about Spigen: Multiple people who ordered their Tab S8 Ultra screen protector on Amazon received used products that had previously had the film lifted and re-attached. When I ordered one, I received a box that had been opened but the glass itself looked untouched. After applying it, I found that it didn't sit flat on the bottom left corner due to a defect in the glass (it wasn't cut correctly, or it's not perfectly flat for some other reason), so it lifts up a little there. When I went back on Amazon to request a replacement, I found it was no longer available on Amazon, so I contacted Spigen directly asking for a replacement directly from them. After sending a photo of the issue, they agreed to send me a replacement, but then 3 days later, they emailed me saying that they were out of stock and didn't know when they'd be back in stock (making it sound like they were going to be out for quite some time). Due to this, they told me that they have decided to refund me on Amazon instead and did so. Only THREE days later, I found that the item was available on Amazon again, SHIPPED AND SOLD by Spigen directly, but now listed at a much higher price than I had originally paid. Essentially they're forcing me to buy it at a higher price now. When I emailed them back to point this out, they gave me a non-answer about how Amazon is a competitive marketplace, and that prices may change (refusing to acknowledge that just days ago they were acting like they're not going to see new stock for ages and refunded me without my consent). When I tried to point this out again, they stopped responding to me, and it's now been almost a week with 0 word from them. I just feel that people should know this.
Oh my, that sucks so bad! That's not cool of them at all, I'm sorry they're putting you through all of this. That's really odd for Spigen to do, they're known for usually being pretty legit. I totally believe you though, I"m seeing a few negative comments starting to get posted on Amazon, I just checked now. That's very unfortunate, because the install "thingy" you rest the tablet in makes for a super clean install. Thankfully I'm starting to see a ton of other options coming in cheaper, so it might be a good idea to just bite the bullet and use one of them. You could probably use that same install "thingy" with it too, so that might work out okay. I'd pick up one of the cheaper 2 packs if they're out for the Ultra. I might end up doing that as well, since I had to pull this one off. There was 1 speck of dust that I didn't see when doing the install on camera, and the air bubble around it just wouldn't go down, so I'm running it naked now too. Makes me feel a bit nervous, that's for sure. Thanks for watching and sharing your insight with everyone, it's greatly appreciated.
@@RADERTECH I want to give them the benefit of the doubt too because I typically hear great things about them from others, although I personally (as far as I remember) have never used their products before. I don't really blame them for the used item issue, because I've had this kind of issue with Amazon-fulfilled orders before (I ordered a "new" $300 PSU from Amazon once, only to receive one that had not only been previously opened, but whoever did so took the $300 unit and replaced it with their cheap < $100 unit prior to returning it. That's not good of course, but it should have never been my issue to deal with as Amazon shouldn't have sent me a returned unit that was opened when I'm ordering something advertised as "new"). But going almost a week with no response is . . . less than ideal. And I'm not happy that they processed a refund with no confirmation from me, or even asking if I'd be ok with waiting until they had stock.
@@joon0 I feel your pain. I once bought a $300 ready to fly freestyle drone from them, and it was dead on arrival. I can tell someone had messed with it too. Amazon does a lot of shady crap, that's why I never feel bad when I return stuff without any real good reason, other than changing my mind. They make so much money and work their workers to death in some locations, literally. They're like one of those necessary evils we have in the world, lol.
so are you saying don't buy this?
@@fallback8314 I would still recommend it, but the price has sky rocketed! They're asking $35 for it now, no screen protector is worth that cost. It was like $10 to $15 cheaper than that when I made this video. I think there was a bad batch or 2 in the early goings, or somehow they were getting mangled at Amazon (returns, mishandled, not sure) and a few folks had problems with them.
Considering the price hike, I'd probably go for something like this - www.amazon.com/Samsung-Galaxy-Ultra-Anti-Scratch-Case-Friendly/dp/B09P4Q5W2V/ref=sr_1_1_sspa?keywords=spigen%2Btab%2Bs8%2Bultra%2Bscreen%2Bprotector&qid=1650467898&sprefix=spigen%2Btab%2Bs8%2Bultra%2Caps%2C166&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWks0MTRHU1laWTVZJmVuY3J5cHRlZElkPUEwMjMwNjU3MUtZV1FGTjFISVcxUSZlbmNyeXB0ZWRBZElkPUEwMjAzMTA4Q0pVRklTNENLSE5OJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1
You get 2 of them (in case you mess up while installing the first one), and there's a promo code taking them down to under $19. Looks like it's getting good reviews as well.
I'm just shocked by how much they're charging for the Spigen one now, definitely not worth $35.
I like the cover, but I honestly think that screen protectors shouldn't be necessary for most tablets or phones that use Gorilla Glass 5. However I imagine that the larger sized Ultra is probably going to be more likely to slip and fall. And if it did fall it's size and weight (still lighter than an iPad Pro!) could potentially cause damage to the screen.
When it comes to scratches, even on my very low to mid-range phone (Redmi Note 8T) which also has Gorilla Glass 5, after 2 years of constant use and many, many drops, it still doesn't have a single scratch or screen imperfection. So, I'm not planning on using a screen protector on Tab S8 Plus. Having used one on a previous budget tablet, despite many attempts, I came to the conclusion that it is impossible to fit a screen protector without it being visually noticeable. Maybe that was just the brand of screen protector I used, who knows? Anyway, thanks for the vid!
Hi Paul, thanks for stopping by and watching and for sharing your insight. I know screen protectors are hit and miss with most folks, I'm someone that's on the fence myself. This particular one was a perfect fit (rare) using the guide thingy it came with, but I ended up having a couple specks of dust that didn't show on camera, and end ended up having to remove it, so I'm back to not using one as well. Just be careful with the keyboard cover rubbing up against it when it's closed, those nubs can dig in after time, but I don't think they'd cause anything more than superficial surface scratches that nobody would be able to really see anyways. I do like the peace of mind they give for some reason, but that's just a mental thing, lol. Thanks for watching 👍
I just got a tiny crack in tab S7 screen when it feel face first onto a tiled floor. Wish I had a screen protector though my case has a small lip. It's a minor crack but still.
@@vieauparadis Ouch! I'm sorry to hear that, that sucks so bad. Glad it's small, but still. Thanks for watching and sharing your experience.
@@vieauparadis well you can stop feeling bad, because screen protectors can't stop that kind of damage.
@@RADERTECH My pleasure. My other issue with screen protectors are that even Samsung recommend not using one if you're going to use fingerprint recognition. I'm finding facial recognition too hit and miss, so that's a must for me. I haven't received the keyboard cover yet, but thank you very much for bringing that to my attention, it wasn't something I'd even considered! I bought a decent clip-in folio book cover today which will probably end up being my main cover, I'm just going to sell the free Samsung one.
Keep up the great videos and the much appreciated personalized replies!
Very helpful and nicely presented. But consider re-shooting with lighting so that when your hand is over the screen using the squeegee your hand isn't completely in shadow. It's impossible to see what your doing at that critical point of the install.
Thank you so much for your inputs and suggestion. Yeah, the lighting was pretty bad in this early video, there's been some improvements since this came out. Thanks for watching.
I got one from Amazon as well and mine came opened already. The protector appears fine but for 30 bucks it shouldn't come messed with. It's a common occurrence if u read the Amazon comments. Thanks for sharing!
Thank you so much for watching. Another person commented saying the same thing, it's very frustrating to know that's happening. Thanks for sharing, sounds like it's worth avoiding Amazon for them, what a bummer.
@@RADERTECH Your welcome, yes it's a bummer, and I hope it goes on fine once I receive my tablet. There is another youtuber who did installation and tests with several screen protectors for the Tab S8 ultra with drop tests and fingerprint sensor and s pen checks etc... The final one was this Spigen protector and it faired the best out of all 11 of them. It seems like it's worth the money, if mine has an issue I will buy another but not from amazon. I don't know how amazon can ship items that have been opened and tampered with!
@@puddleduckist Thanks for sharing the test results, glad to hear it faired so well. Yeah, Amazon does some iffy stuff at times.
When I put any screen protector on I do it in the bathroom with the shower on hot helps keep any little dust from landing back on the screen. Works great
Yes indeed! That's a great tip, thanks for sharing this with everyone.
My apologies for the slow reply, I've been away for a couple eye surgeries. Thanks for stopping by.
Awesome video, currently on the s7+ can't wait for the ultra 🙌
As great as the tab S7+ is, you're going to LOVE the Ultra! Cameras and face unlock are way better, the look and feel just feels more modern, and that screen.... I'm telling you, it's a sight to behold! My only gripe is that that pixel density is a bit lower than the S7+, but you can't really tell unless you have your face right up to the screen. It's a great machine! Thanks for watching 👍
You explain things really well.
Do you have any issues with the screen protector such as bubbles, dust,cleaning or writing on the screen or the tablet recognizing your fingerprint?
Thank you so much for watching! As long as you take your time and are patient, you shouldn't have any problems. You may have a few bubbles for a few days, but they almost always work themselves out. Just be careful to make sure there's no dust at all when applying it. As far as writing goes, it feels about the same, just a bit more slippery, if that makes sense. For the fingerprint reader, it will be touch and go for the first week or so. Make sure to re-register your fingerprint a couple times, and then once more after about 10 days or so, and then it should be great from there on out.
Hi , how to wake up the screen for notification on s8 tab ultra ??
Go to setting, then Notifications, and switch it to Brief from Detailed. Then in Brief popup settings, enable notifications when the screen is off. It's an on/off toggle. Thanks for watching!
Do what you want its yours, I am putting one on.
👍
This is the best one so far and hopefully they will have this in 5g soon
I hope we get a 5g version soon too, thank you so much for watching.
Does the fingerprint sensor work well ?
I think so, it's definitely an improvement over the tab s7+. Once you install a screen protector though, it will take about a week to completely settle in, then you'll want to re-register your fingerprints. It should be smooth sailing from there. I rarely use it though, because the face unlock has been drastically improved over the s7/s7+ and works almost 100% of the time. Thanks for watching.
@@RADERTECH thanks for the answer :D
@@johnniCuTi 👍
I always have bubbles when I out screen protector so I just use it without it
The bubbles are a pain, for sure. I actually had a speck of dust trapped after doing this install so I had to remove it. Thanks for watching👍
Does anyone know if there a way to use a usb hub or a dock so I could connect a monitor and other peripherals and charge it at the same time? Thank you!
Hi Peter. Yes sir, they do. You'll want a USB hub that offers Pass-Thru power. An example would be the Anker 341 USB hub as a budget option. Just be careful and read reviews before buying, some have been known to overload USB ports and it can actually fry them. It happens to Mac's often, but seems to be less of an issue for Windows and android devices. Thanks for watching.
@@RADERTECH Very interesting. I will check this out. Ty!
@@peterhafner7768 👍
I'll keep this short...I love, love, LOVE this tablet. th-cam.com/users/postUgkxLNmVocUk8tnSkwWIlYSNFzWRIaFTBuzS The picture quality is amazing and there are so many features that this technodino can't wait to learn! My only (very, very minor) complaint is that I ordered this in bronze and they sent me black. Yes, it should have been corrected, but we were only in country for a short period of time and I didn't want to run the risk of not getting a new one in time. I'm such a fan of Samsung Galaxy tablets that I'd rather suck it up than lose out on having it. In the big scheme of things, this rates an irritant factor of .0000000001 out of 1000. In other words, I'm not looking at the colors when I use it, so I got over it very easily.
Congrats on getting the latest one, it's really nice!
I put this on and I like it
It works well and is a great fit. Thanks for stopping by and watching.
After you put the screen protector , is the screen clear as if you dont put the protector ? I mean is the quality great. I remember some brand screen protectors have bad quality where the screen, end up looks foggy
Thank you so much for watching. I know what you mean, they can get a little cloudy looking. No, not for this one here, especially after it's on for about a week. I had to take mine off though because a tiny air bubble formed around a spec of dust. The price you pay for doing an install on camera, lol. After about a week, you'll want to re-register your fingerprints. There's a ton of other screen protectors now on Amazon for much lower prices, I'd probably start with one of them.
Hi, I have a question. Does the S Pen work with the protector the same or does it work worse, slower...... ?
Thx!
It's about the same, except the screen will feel a little more "slippery", so to speak with it on. Some artists hate it and will refuse to use a protector for that reason, and many don't mind it all. As far as the s pen input registering accurately, it's totally fine, I can't tell a difference. Just make sure to use a screen protector that's no more than .33mm thick as then it might start to have problems. Thanks for watching.
@@RADERTECH Thanks a lot! ✌️
@@as.9801 You're welcome
the screen cover sucks with the SPEN though. I had the same one on my ultra but I removed it becuase the pen is wayyyy to slippery with it on.
Very good point Ben, it definitely is very slippery. I still have the original screen protector that it shipped with on, so I have yet to feel the actual glass, lol. One of these days it will eventually wear out. Thanks for sharing your insight and for watching.
@@RADERTECH does it come with a pre-installed screen protection?
Does the fingerprint sensor work normally with it?
It sure does. You'll just want to re-register it after about a week, perhaps once more about a week after that. Thanks for watching.
Hi still waiting on mine arriving but does the s8 ultra come with a screen protector already applied by Samsung like the s22 series?
Thanks for stopping by and watching. No, I'm afraid it doesn't come with one installed like the s22 and Fold 3. Enjoy the Ultra, you're going to love it!
Does it affect the S Pen performance?
Only during the first or week or so while it settles. After that it should work just the same, just the screen will feel a bit more slippery, if that makes sense. Thank you so much for watching.
Thankyou so much for the video. Keep it up with interesting stuff for this godzilla tablet.
Thank you so much, will do👍
Where the third party case covers and screen protectors for it I don't see it any I checked on Amazon , Google don't see any I don't Wana order Samsung
Here's a few....
1. www.amazon.com/Zeking-Designed-Anti-Scratch-Silicone-Protective/dp/B09SCPPDN2/ref=sr_1_4?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-4
2. www.amazon.com/Samsung-Galaxy-Ultra-Anti-Scratch-Case-Friendly/dp/B09P4Q5W2V/ref=sr_1_2_sspa?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSVZTTlFLVUVTUFpMJmVuY3J5cHRlZElkPUEwOTQ3NjA0M0JMTkQ1WE9PSklMSiZlbmNyeXB0ZWRBZElkPUEwMTU5OTgxM0paTjlGNVM5Szk3TSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
3. www.amazon.com/SanMuFly-Samsung-SM-X900-SM-X906-Creative/dp/B09TFV1MKF/ref=sr_1_5?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-5
4. www.amazon.com/SanMuFly-Samsung-SM-X900-SM-X906-Graffiti/dp/B09THF8K8H/ref=sr_1_6?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-6
5. www.amazon.com/MOOISVS-Compatible-Samsung-Galaxy-Transparent/dp/B09SYKNQLF/ref=sr_1_10?crid=NU0YYTGUEV7W&keywords=tab+s8+ultra+case&qid=1646342556&sprefix=tab+s8+ultra+case%2Caps%2C176&sr=8-10
You'll see a lot more pop up within the next 2 weeks. Thanks for watching.
Do you think this protector will work on the S9 Ultra as well? Is there a difference in size?
According to a couple reddit posts, it will work, but you'll have to make the camera cutout a tad bit bigger with a knife in order to fit the new camera notch. Sounds like it's a tiny bit bigger on this year's model. Thanks for stopping by again, appreciate you!
@@RADERTECH Thanks for the info. I'll just wait until they make one that fits it exactly.
@gilleojax Yeah they do as I installed one on mine a week ago and all is fine.
Use a cling wrap and peel it off, easier that way
That's a GREAT idea! Thank you for sharing that and for watching.
Impact on spen experience, especially for drawing
There's no real impact other than the s pen just feels different compared to not having it on. I don't notice any reduction in the sensitivity, it just feels different. Not in a good or bad way, just different. Thanks for watching!
Link?
I added a couple in the description for you. Looks like it's currently sold out everywhere I"m seeing, but that will sure change soon. Thanks for watching.
Putting screen protector kills oled display i believe. Good stuff great video.
Hmm, I've never heard of that before. You shouldn't come across any problems using it with OLED or any other type of panel. There's the layer of glass between the panel itself and the screen protector, so there shouldn't be any problems. You should be fine. Thanks for watching.
@NINJA THEORY I'm with you. I'm so OCD about micro scratches and scratches in general, they drive me nuts! To me, it's totally worth taking the time and putting in the effort to do a nice screen protector install. I've never once had an issue, including fingerprint recognition and s pen use - it all stays the same. Thanks for sharing your thoughts on it :)
@NINJA THEORY my freind told me this. He pre ordered s22 ultra. I pre ordered s8 tablet. When i was looking for screen protector for my tablet he said dont put screen protector it will kill the beauty of oled screen. I also heard this concept 1st time in my life. Haahaa
@@GuguPoems I hope you don't mind me chiming in, I know this was intended for NINJA THEORY. You won't notice any degradation in screen quality or the appearance of things on the screen at all. Please keep in mind that when you install a screen protector, it's not set in stone or anything. What I mean is that you can very easily remove it, it literally takes 5 seconds to do, so you have that option if you're not totally happy with it. Removing it won't harm your device at all. Just lift up one corner with your fingernail and it will pull right off and won't leave anything behind. Give it a nice wipe down with a screen wipe and you won't even know it was ever there. Just sharing my experience of putting well over 100 of these on devices. Most of my extended family asks me to do theirs because they get nervous about it. Just take your time and make sure you keep your heater or A/C unit off during the install, as it might blow some dust on your screen that you can't see during the install.
@RADER TECH i will go with screen protector. I will not take risk leaving my tablet without protector as i never had any device where i did not put screen protector. Thanks for good tips you shared
I honestly don't recommend this screen protector, have ordered it 2 times, and is impossible to not get air bubbles, even though you have the guide to help you, air bubbles still remain, and is impossible to get rid of them, and finally decided to take it off.
Sorry for the slow reply. Yeah, it can be real pain, especially on a tablet this size. I personally don't use screen protectors, outside of doing an occasional video on them.
That would be nice if their was an actual case that protect the back AND THE SIDES! Samsung what tf?
I know, it sucks. The worst part is that when you use the back part of the keyboard as a kickstand, the bottom of the tab is complete exposed and rubs against whatever you set it on. They really need to rethink it. I'm giving away a bumper case that protects the back and sides, check on the latest video I posted if you think you might like it. Thanks for watching.
ordered it!
Nice! Glad they're back in stock, they've been sold out since right after I ordered it. Just be very careful with dust when installing it. As another commenter mentioned, make sure your heater/AC unit is turned off, and that you triple check the screen for dust particles as your installing. I ended up having to remove mine because one little speck of dust was causing one air bubble not to settle. It wouldn't have happened if I was doing it off camera and looking closer, the price was paid for making a video, lol! The best part about this screen protector is the fit - it aligns perfectly with the alignment tool they give you, it really does help a lot. Thanks for watching.