just wanna say, after my car being broken for 2 weeks, this got my miata working again. Turned out the issue was that damn o-ring from the piece connecting the hose to the pump
Was the o-ring and washer kit separate from the replacement pump? My power steering started leaking after the car sat while I was waiting for a new map sensor. I’m thinking the o-ring might’ve dried out causing the new leak. My car is low miles 65k but it is a 2007 so it would seem possible that the o-ring is just tired.
I just had to unplug the low pressure line to get to something and now it whines and I can't get it to bleed out after several lock to lock attempts....
I noticed noise when engine is hot. Put car on jacks, turn wheels, engine cold or hot, no noise !!?? I flushed fluid that did not fixe noise... Is it pump or belt ?
Get a long screwdriver, place it on possible parts that could be making the noise, put the other end of the screwdriver on your ear, and that’ll help narrow where the noise is coming from
I changed the pump because my old one was making a whining noise. It was an indication that the pump was going out, so I decided to change it before it got worse
@@off_road_all_day How many miles do you have on your NC1?? My PS is getting heavy after longer drives! I am taking it to my mechanic today to see what he has to say.
@@off_road_all_day Very Nice... I am at 106k and have owned it since 100k.... Since then The only thing that has had to be replaced was the VC gasket and the clutch throwout bearing.... Also, I had to replace the ignition coil pigtails! While I was there I did the Rear Main Seal, full excedy OE clutch kit, and all the fun stuff that goes along with that... All in all its been a great little car and I can't wait to fix my PS system problem and enjoy it!
![[TH] 2024 PMSL SEA GF D2 | Summer | ร่วมส่งแรงใจ เชียร์ไทยไปพร้อมกัน](http://i.ytimg.com/vi/dN2gLsCJ0T0/mqdefault.jpg)
One of the best instructional videos I’ve ever seen, simple and right to the point appreciate the help man 💫💫
Thank you so much for your video! Followed your video, and it made the whole job very straightforward.
Nice vide, watched it a couple of times. Thanks!
Great how to videos on the NC man, thanks for sharing and regards from England.
Great video! Thank you 🙏
I'm about to embark on this same journey now. Thank you so much for this video!!!
Thank you for the video! I'm about to do steering fluid flush as well as belt change so your video covers both.
great video, thanks!
just wanna say, after my car being broken for 2 weeks, this got my miata working again. Turned out the issue was that damn o-ring from the piece connecting the hose to the pump
ima have to show my friend pearson this
Shut up
😂😂😂
Was the o-ring and washer kit separate from the replacement pump? My power steering started leaking after the car sat while I was waiting for a new map sensor. I’m thinking the o-ring might’ve dried out causing the new leak. My car is low miles 65k but it is a 2007 so it would seem possible that the o-ring is just tired.
It did not come with with any o-rings
Good video buddy! Where did you get the steering pump from?
My local auto parts store. Pretty sure it was O’Reilly’s
@@off_road_all_day thanks a lot!!
I just had to unplug the low pressure line to get to something and now it whines and I can't get it to bleed out after several lock to lock attempts....
I noticed noise when engine is hot. Put car on jacks, turn wheels, engine cold or hot, no noise !!?? I flushed fluid that did not fixe noise... Is it pump or belt ?
Get a long screwdriver, place it on possible parts that could be making the noise, put the other end of the screwdriver on your ear, and that’ll help narrow where the noise is coming from
My friend, can I ask why you changed the pump?? Maybe you are having the same issue I am having… heavy steering over long drives!
I changed the pump because my old one was making a whining noise. It was an indication that the pump was going out, so I decided to change it before it got worse
@@off_road_all_day How many miles do you have on your NC1?? My PS is getting heavy after longer drives! I am taking it to my mechanic today to see what he has to say.
@@BlazzinTech My NC1 has 126,383 miles currently
@@off_road_all_day Very Nice... I am at 106k and have owned it since 100k.... Since then The only thing that has had to be replaced was the VC gasket and the clutch throwout bearing.... Also, I had to replace the ignition coil pigtails!
While I was there I did the Rear Main Seal, full excedy OE clutch kit, and all the fun stuff that goes along with that... All in all its been a great little car and I can't wait to fix my PS system problem and enjoy it!