Hey man I’m about to order some headers from speed , I wanted to get the long tube headers but I’m not exactly sure I don’t run into fitment problems, I’m doing a 4.8 with 4l60 on my obs , what’s your recommendation
@@badgoat6660 shoot ok so you didn’t have any clearance issues. I’m using a 4l80e and was wondering if I need to grind 😳. Since the 4l80e is some what the same in bell housing as th400 thanks.
@bighurkgkb4l745 good question 🤔 I forgot. But you can get any car running a with a little under $2,000 .I actually ended up having the transmission rebuilt plus full exhaust. It does add up quick ⏫️
@bighurkgkb4l745 $2300 If I would re do the build again I would just buy a good core for cheap and have it rebuilt .A junk yard transmission is just that.
Awesome! This video helped me make a decision and saved me time with the spark plug wires!
I re-used the SBC high pressure PS line on my swap. Haven't started yet but we will see how it will hold up!
Should hold up
@@badgoat6660 I thought so too. Cleaned it up and looked pretty good.
Hey man I’m about to order some headers from speed , I wanted to get the long tube headers but I’m not exactly sure I don’t run into fitment problems, I’m doing a 4.8 with 4l60 on my obs , what’s your recommendation
@@cristophervalenzuela3246 get dirty dingo engine mounts to adjust the headers from hitting.
Que usaste de engine mounts?
www.dirtydingo.com/shop/mobile_product_info.php?cPath=2025&products_id=1314
Did that bolt up to your stock exhaust?
Hey boss i got the same headers and im having issues with my engine oil dipstick, which one did you use?
Stock oil dip stick remove the oil dip stick before installing the headers
@@badgoat6660
Dang , idk im having issues with mine running into the headers
Your block is a gen 3 5.3 right
@juanespinoza7668 yes from a 2003 make sure there is no bolts getting in the way of the header
Hey bro, quick question. Since you’re using the TH 400 did you have to do any grinding on the transmission bell housing for these headers to fit?
I am using a 4l60e
@@badgoat6660 shoot ok so you didn’t have any clearance issues. I’m using a 4l80e and was wondering if I need to grind 😳. Since the 4l80e is some what the same in bell housing as th400 thanks.
Did this header kit require any welding of do they tie in with flanges?
They do come with a 5 inch test pipe
Hi bro, tell me the name or part number of high-voltage wires for spark plugs ???
Jdm
@@badgoat6660 Do you have a part number? Or a link to a spare part! I can't find them
JDMSPEED P/N- 19005218
Is this on a 2wd or 4wd obs? trolling for headers for a 5.3 swap in a 4x4. Are those taylor, accel or speed engineering wires?
This is a 2wd truck and the speed engineering wires will work just fine 🙂.
Do you know the part number?
What kinda headers did you go with?
25-1021
SPEED ENGINEERING LS SWAP HEADERS - MID LENGTH
Did you replace bearings?
Yes
@@badgoat6660 how much was the rebuild?
This work for 4wd as well?
I belive so.
Only way to know is to try a pair good luck👍🏼
did you have to change the drive shaft length or adjust engine up or back?
I had to adjust the engine back I just rebuilt the drive shaft using stock length
What was the budget
@bighurkgkb4l745 good question 🤔 I forgot. But you can get any car running a with a little under $2,000 .I actually ended up having the transmission rebuilt plus full exhaust.
It does add up quick ⏫️
@@badgoat6660did you get the 4l60 rebuilt and if so what was the price range
@bighurkgkb4l745 $2300
If I would re do the build again I would just buy a good core for cheap and have it rebuilt .A junk yard transmission is just that.
What transmission do you have
4l60e
You can actually bend that end
😎🤙🔥🔥🔥
I am building a truck now, do those headers fit to the stock exhaust? and i have a 4l80e i know they said may need clearing
No I had to a full custom exhaust done after the headers
@@badgoat6660 dang how much was that