ESP32 AUDIO SPECTRUM ANALYZER
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2021
- First Of All I Want To Thank's To The Original Owner Of The Code I Used On This Project,Specially "Scott Marley" For His Projects Like This... I Want To Share This Project For Other To Get An Idea How This Is make,On This VU Meter I Used Esp32-38 Pin.You Can Use Esp32 Like On The Video Of Scott Marley He Used,and I Used WS2812b LED Strip And You Can Use WS2812b LED Matrix Too... You Can Go To Scott Marley TH-cam Channel For More Info... • ESP32 spectrum analyse...
Please Sorry For My Camera I used To Record The FFT VU Meter While Running Look Not Good At The Camera Little Blurry... Hope You Enjoy Watching
Stay Safe Everyone...
Wiring Diagram: www.mediafire.com/view/ngkjdf...
Code Here: github.com/s-marley/ESP32_FFT_VU - บันเทิง
Very nice setup and instructions 👍👍
Even great you gave full credit to the coder,
Even the WLED sound reactive on esp32 doesn't give these effects on latest release as of writing this.
Love and respect from India 🙏🙏
Its good to see this project.
Thanks 👍
Love this project. Have question, what aux 3.5 module use in this to tranfer sound to esp32 make led work
Beatiful job! I would like to know if it's possible to expand the project adding more led strips in order to make a more accurate frequency spectrum, thanks.
Nice job !
Thanks!
can you please specify capasitor voltage ? how to add or reduce the number of LED in arduino code?
Very good your project, but my leds are inverted, instead of turning on when it emits the sound, the leds turn off. Can you show me were I can change this in my code. Obs: my led strips are the same as yours
Nice 👍👍
thanks
nice project. I'm curious, which version of the FFT library did you use to get such precise frequency analysis as your TH-cam video shows after 8:12? With the current FFT v. 2.0 it doesn't work so well. Something flashes somewhere in sync with the music. but by no means recognizable frequencies
Very nice project.........would you know is there a function to change the order of the LEDs from left-right serpentine to up-down serpentine.......I want to build an infinity mirror and think the strips going up down would be better
yes i think its good too, try to watch this for some ideas thanks th-cam.com/video/Mgh2WblO5_c/w-d-xo.html
Hi, very nice project!!! How many modes does it have? I can use the matrix pannel? for example 2 modules 16x16 or 32x8 instead of the led strip?does it need some change on the wiring ??
You can use matrixes, yes. They are wired in the same manner; a snake pattern.
Very nice project. how to do upload this code for esp 32 board ? . what is select board for arduino IDE ? Please help me. Thank you.
8:00 Can this 3.5mm jack also work for wled?.?
how can I change the column orientation , i need each strip as column ....
Very nice project...
But when i input the project
There is a diagnostic error showing in the line 5 col 10 'FastLED_NeoMatrix.h' file not found
What can i do now ?
Please reply 🙏🏻🙏🏻🙏🏻
Help me 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
does it need to be programmed first?
Hello, It's nice project. May I ask you if I am trying to apply your code on 50x50 pixel then it work ? and could you please tell me how much voltage and amp you had apply in this project(16x16) ?
thanks btw,you need 5v 4amp atleast
2500 leds is going to require a separate 5V supply with at least 8A, there will be a point when all leds will be lit. 8 rolls of 300 leds is going to be pricey too...
Hello. Can you give me the code for this project. I want to make a spectrum analyzer like yours. I tried with others and I didn't succeed. thank you.

Hello everyone. i got a question and hopefully someone can help me :)
i wired up my ESP32 (Dev KitC V2 ESP32-WROOM-32) Line in version like showed in this wideo and dont know what i got to set in the WLED app to make it respond to the sound
Is the board ready or does it need to be programmed by OSoft?
can you please specify the two resistors wattage, and capacitor voltage that you used.
sorry for the late reply, this 2 resistor is 10k value each
i think the resistor is 1/4 watt
Can we do this project as 35 band? Does ESP32 work in 35 band?
Tinted glass should be used as a light filter in front of the LED matrix to increase contrast. Why did you stick the LED strip on this glass?
new project agen good you a anelizer
thanks
You can save money by using plywood as the backboard instead of the expensive perspex. If you use perspex, then at least use it as the front cover.
I m getting this error :-
error: 'std::round' has not been declared
using std::round;
🇧🇷👏🇧🇷👏🇧🇷👏🙆♂️
What setting i put
great video .esp8266 can I replace it
It might also work in ESP8266,but you will have to reduce the sampling rate as it's not as fast as the ESP32. Hope will help 👍
Will it work on ESP8266 too ??????
Привет, с RGB работать будет?
It is rgb 🤣
What settings should I put on Arduino?
.ino file
@@ALTechDIY
Ino file is program
In file included from D:\ESP32_FFT_VU-master\ESP32_FFT_VU\ESP32_FFT_VU.ino:5:0:
Multiple libraries were found for "FastLED_NeoMatrix.h"
C:\Users\Admin\Documents\Arduino\libraries\FastLED_NeoMatrix-master/FastLED_NeoMatrix.h:23:29: fatal error: Framebuffer_GFX.h: No such file or directory
Used: C:\Users\Admin\Documents\Arduino\libraries\FastLED_NeoMatrix-master
compilation terminated.
Not used: C:\Users\Admin\Documents\Arduino\libraries\FastLED_NeoMatrix-1.1.0
exit status 1
Error compiling for board ESP32 Dev Module.
видимо, д.б. вторая часть,
где автор нажимая на клавиши, пишет и отлаживает софт, это часов на 40 минимум, если не на 100. и третья, где объясняет алгоритм, это, если от школьного уровня, минимум на 400 часов.
т.о. для меня осталась загадкой целевая аудитория ролика:(
кст, автор пользуется китайским (что нормально) паяльником на 220в. пара винтиков на паяльнике держат нагреватель и жало, и означают, что он не паяльная станция. т.о. нет гальваноразвязки между сетью и жалом, при 25 градусах сопротивлегие корпус-сетевая вилка ~ 10мегом, при 250 градусах
Is there the code included on the link?
Link Of The Code Added On A Description
Thank You!! Nice & fun project anw
@@ALTechDIY where i look
@4:55-hi sir,what board is this?
Aux socket on pcb😂
do not touch the LEDs
why??
gimana cara isi data ya
Apa maksudmu?
Kode ardino ya
github.com/s-marley/ESP32_FFT_VU
Mantap in. 👍👍👍
@@slipknotmetal5344 Berhasil kah?
Schematic? Theory Of Operation? USELESS
go to the top of the page and expand the comments by the OP ( where it says SHOW MORE click on show more...) you will find the diagram and code sites in there