do you have this all documented of measurements as build something to use non usable fireplace area. The Wled stuff and LED's well versed its the canvas to place the matrixs is what I need
at 7:20 video duration it says "Now you have to install wled on STM32" is that a typo? it should be esp32 or wled already supports stm32. overall good video.
absolutly not via ESP32.. as you can see in the video there is a dedicate power line for each row.. you need a 5 volt power supply. The power supply current depends on the intensity you want to give to the LEDs in the software. you may need 5V 10A or 5V 70A
What was that you said on 2:30?
do you have this all documented of measurements as build something to use non usable fireplace area. The Wled stuff and LED's well versed its the canvas to place the matrixs is what I need
at 7:20 video duration it says "Now you have to install wled on STM32"
is that a typo? it should be esp32
or wled already supports stm32.
overall good video.
Hello, this is what I mean.👍🏻
th-cam.com/video/TOEnFKLm9Sw/w-d-xo.html
@ChrisMaherDIY
So he was right, you meant ESP32 not STM32 @@boomytech7504
yep... is what I meant with the link I posted as answer...
How are we on powering this? Can we just run a high wattage power supply through the ESP32?
absolutly not via ESP32.. as you can see in the video there is a dedicate power line for each row.. you need a 5 volt power supply.
The power supply current depends on the intensity you want to give to the LEDs in the software. you may need 5V 10A or 5V 70A
can you add custom logos and messages? and if so how
I need to make a video about my Neopixel matrix - 2kW power (yes, 400A!), 96x72 Neopixels (-:
Would love to see that!
Anderson Melissa Hernandez Michelle Lewis Kimberly