If your dice making plans fall through- when in doubt... Go Gold ;) Glad to be back y'all! Thanks for sticking around! I have some projects in the works, but was just itching to get something back out to you all again. So I hope you enjoy this silly little thing that I did :)
That was some 200 IQ dice shopping! 🤓🤯 I'm extremely glad that you are back. 😃🤩 How is the family doing? I bet it is extremely exciting and expensive. 😅 😊👶
I honestly thought this is where this video was headed, and I was kind of into it. Question: Would you keep it hollow, or fill in the center with cheaper dice, or use the gold dice all the way through? I feel like if it was solid, you might run into greater danger of damaging your tabletop just rolling the thing. Thoughts?
I'm sure it's not the highest number of D6 rolls per round, but I've always been fond of the fact that a 17th level character casting Conjure Animals at 9th level can summon 32 swarms of rats, dealing 64d6 damage in one round. In addition, 1 swarm of rats is about 25 rats, meaning that 32 swarms is equal to 800 rats swarming the battlefield.
Giant poisonous snake is the same CR, but does 1d4 + 3d6 poison dmg so it would be 32d4 + 96d6. There is also the Dual Focus feat in the taldore campaign guide (1st one) that lets you concentrate on 2 spells. so for at least 1 turn you could have 192d6.
@@paullafleche506964 Giant Poisonous Snakes all attacking an AC 19 (average AC of CR 17+ ) creature deals an average of 352-353 damage, which is enough to kill your average Ancient Copper Dragon.
Congrats on the babies! This video of you simply enjoying something fun, and showing the results of your discount was really cool. I've always wondered how much someone can make off of those discount codes. Sending lots of friendship and virtual support! Keep up the good work!
So... since the last episode you went from Goblin Dice Lord to Goblin Dice Dad Lord and now this gives you enough gold to rank up to Dragon Dad Dice Lord. Your campaign went wild and I'm happy to know that, I know you'll be a great father.
@@Rybonator Would like to see you try your hand at casting metal dice. You can get a gold melting furnace. They're induction based so need for fuel. They also come with small crucibles and tongs. They're also small enough to fit on workshop table and not take up a lot of room.
Love the video Rybo! Silly/fun videos are just as appreciated as any other video too! So long as you have time for it, we’ll take whatever you got! But I’m sure all us dice goblins fully understand if it takes a while for the next video! Gotta take care of the baby dice gobbos!
Welcome back, Rybonator! Glad to see you back! I like videos like this, so please keep them coming. Of course, I also thoroughly enjoy the dice-making videos. Looking forward to the redo of the brass shavings dice. I hope the mini Rybonators are doing well! Take care.
Before watching this video I asked myself the question, "Is this shameless clickbait or a just a nerdy impulse purchase?" The stacked cube of dice with the sides all aligned answered that question, I think.
Glad to see a new video from you! I just made a silicone slab mold and pulled my first set of dice! They are translucent green with a purple swirl, the only thing left to do is get some quality paint to ink the numbers (gold of course). Thanks for making these great videos and giving me the knowledge, inspiration, and confidence to make these dice for myself! Take care of yourself and your family!
The numbers on the dice in all different directions in the box was getting to me but you remedied that with your cube. 😁 Welcome back and congratulations on the little ones! ♥️ Edit: OH NO! THE CHAOS! 😵💫
Rybonator!!! I missed your channel so much. I've made so many dice this year and it's all thanks to you! I'm even finally making dice with almost no flashing, and I've never been happier as a hobbyist using premade molds. I hope you and your family are happy and healthy, take care!
@@Rybonator That's good to hear! I know the past two years you did some pride dice, any plans for that this year? No pressure if not, it's just always fun to see pride stuff so I was curious
Ahh! So glad to see a video pop up from you again! It was a fun little video too, nothing wrong with hoarding gold dice. Embrace your new dice dragon persona. I hope everything is going well with the family and Rybowife and the Rybobabies are all happy and healthy!
Congrats on the little goblins, goblettes? I bet the metal is Nordic gold, which is a copper alloy with a little aluminum, zinc, and tin. Gold looking coins are often made from it.
This was a fun little diversion. Glad to see you back to making content! Hopefully when you redo that dice set, you'll also show us what failed so catastrophically in the last attempt, because that's super valuable (and often entertaining)!
Welcome back! Great to see one of your videos. I hope life's been treating you well. For the damage: For melee spells, I'd say a Flame Blade at 6th lvl (5d6) + martial adept feat with trip attack (+1d6). Make sure you're surrounded and have whirlwind attack (hunter archetype ranger) for up to 8 attack rolls. Then have a wildfire druid spirit that casts fiery teleport. It deals an extra 1d6 damage to each creature surrounding you. This 1 turn yields, in best conditions: 7d6 x 8 = 56 d6 damage. To gain this, take 11 lvl's in ranger and then 9 lvl's in druid. For pure weapon attacks: Have a 5th lvl paladin with branding smite. Have the martial adept feat with feinting attack (+1d6 and advantage!!!). Have a scimitar equipped (+1d6) or a short sword. Then put the 15 lvl's in rogue (+8d6) and pick arcane trickster. At this point you deal 1d6 (scimitar) + 1d6 (feinting attack) + 8d6 (sneak attack) + 4d6 (4th lvl branding smite) = 14 d6 damage to a single target in one turn.
Don't forget to add a poison to the blade - purple worm is 12D6 extra, though there may be more potent ones. And if your DM goes by the double damage die count critical that is getting stupid, being your 2(14+12)+stat modifiers of damage.
Not going to lie... I really lost enthusiasm for making dice over the last few months, and I'm pretty sure it was the lack of regular Rybonator content. I'll take whatever videos you have the time to produce ;) Wishing you and the family all of the very best!
@@Rybonator I have a little one too and too many hobbies to boot. No fault at your end, just a bit of a muse. It’s winter down here too and setting resin in my uninsulated shed isn’t great this time of year regardless.
going off of the box at 2:06 , a slight bit of padding and it's only 96 dice for that surface, so you'd need 192 D6 to fill the box, so you're only 8 short of filling the box up
Dollars to doughnuts the difference in font is that the smaller font d6s are from the polyhedron sets where as the thicker beefer font is from the solo d6 purchases which were likely two different runs of dice.
"Ok I guess editing isn't going to help" Jokes like this are why I'm subscribed Edit: "For some context, they weigh about 7.5 pounds which is *roughly* around half the weight of my infant daughter" had me rolling
Lovely, sparkly dice. Just so happy to know that your wife and the twins and you are doing well. Thanks for that. (Silly is just fine! Sleep is important!)
Rybonator over the last two years I had learned a lot about dice making from here on this channel. I have recently sold my 50th set and without steps discussed on all your videos I would have never reached this point.
I was just thinking about you this morning wondering how you have been doing. Since my own little one just arrived a few weeks ago I can say from experience that your answer would probably be "Busy."
I discovered your channel in the last month or so and I am so glad to see new content. Here's an idea. Cast a giant D6 out of 36 of the little D6's. Make a Mega D6.
Awesome to see you back Rybonator, I missed ya being in my feed!!! I've been thinking of getting into casting table top minis out of cultured marble. Have you had any experience with the stuff through your hobbies? I've worked with resins before but I'm just looking for tips before I commit to ordering a big bag of powdered marble from overseas.
I love the casual reference to the infant. Great to see ya back and it's absolutely hilarious you got to abuse the absolute crap out of your referral code!
It's just so beautiful... I remember theorycrafting massive damage once with some friends for a one-shot. It involved a couple class features, prone, crit, and falling damage. it was something like over 1k average damage, but I can't remember the specifics.
largest amount i've seen from a single attack was when in my game the paladin was fighting the bbeg's right hand bruiser in the sky (both on flying mounts) and tackled him off, causing them both to fall like an entire mile
Glad to see you had some time to give us a video. I do miss seeing your content. While I may prefer you making stuff type videos (fail or success) this was fun. Hope the twins are doing well and your wife has had the time she needed after. See you when get a chance!
How about some gold leaf dice? Not gold leaf mixed into the resin but inner cores made with ressin then propperly gold leafing all the sides and then a protective resin shell
He's clearly a Metallic Gold Dragon that has merged with either a Chromatic Red and or a Gem Ruby Dragon (might be a combo of the three, gold in the middle, red to the right and ruby to the left.) , given greater power than we can even imagine and ascended into a godhood with that massive roll.
Outside of spells, my mind immediately went to sneak attack damage, but even a 19th/20th-level rogue on a crit only gets 20d6, and Meteor Swarm does twice that.
I could just see you showing up at a convention with several suitcases full of dice for 'Iron Man' D&D. Whenever a Natural 1 is rolled on a die during the game, that die is retired for the rest of the session, and if a player runs out of dice thats it, their character faints and is done.
Who doesn't like a great video on a buttload of dice! (I've missed any video from you so thanks for rolling one out for us) BTW you are indeed a Dice Lord for that many gold D6s! Here's hopping you all roll high and fair!
I haven't played a high level necromancer build yet, but theoretically, you could be throwing that many dice for all your undead minions if your DM has them attack in one go for time's sake.
dropping a barrel of pebbles from a very large height to a crowd of very closely standing people. You have to have special rule in place where a mob of people are counted as a single entity. (i have seen that used for swarms of insects)
Hey Rybonator I've been recently binging your content and it's inspired me to get into making dice sets myself. I was wondering with the gear you have to make your stuff would you still recommend the 1.5 ablaze vacuum chamber and the original pressure chamber or would you recommend different sizes/ brands?
The California Air Tools Pressure pot is great and doesn't have all the finicky work of the harbor. Recommend that.. Also don't need a vacuum chamber. Just the pressure and a compressor.
Druid Craft below hit it on the head- You don't need a vacuum chamber. A pressure pot will do both jobs. Go with a california air tools if you can afford it, if not you can do harbor freight as a more budget option. Check out my making a pressure pot video- it's accurate on how to make the pressure pot, though in it I do say you need a vacuum chamber too- just ignore that. It's old info
If your dice making plans fall through- when in doubt... Go Gold ;)
Glad to be back y'all! Thanks for sticking around! I have some projects in the works, but was just itching to get something back out to you all again. So I hope you enjoy this silly little thing that I did :)
We've missed you rybo
@@jakkeddaw Missed you more :P
That was some 200 IQ dice shopping! 🤓🤯 I'm extremely glad that you are back. 😃🤩 How is the family doing? I bet it is extremely exciting and expensive. 😅 😊👶
@@Pindexter77exciting, expensive, exhausting... All the ex's haha :) and also wonderful! :)
I though I was seeing things😢 glad you're back, hope you and the family are happy and healthy 😊
Oh no! He has gone beyond the dice goblin and is now a dice dragon!!! He is unstoppable!
I just like to sleep underneath my growing hoard is all...
I for one support our new golden overlord. Long live Rybodragon.
All hail Rybodragon!!! I'm sorry 😂 I couldn't resist commenting after reading this
would that make us dice kobolds. I need to know for science.
@@JayGatz4 Probably
Ok, you know what you have to do next.
Take your Golden Dice Cube, and resin that whole thing together to make one giant golden D6
Don't tempt me frodo
Wouldn't even need to number it cause you can just align the dice to the same orientation
@@Rybonator Please do it! Also congrats on the twins!
@@Rybonatorit would be amazing though...
I honestly thought this is where this video was headed, and I was kind of into it. Question: Would you keep it hollow, or fill in the center with cheaper dice, or use the gold dice all the way through? I feel like if it was solid, you might run into greater danger of damaging your tabletop just rolling the thing. Thoughts?
I'm sure it's not the highest number of D6 rolls per round, but I've always been fond of the fact that a 17th level character casting Conjure Animals at 9th level can summon 32 swarms of rats, dealing 64d6 damage in one round. In addition, 1 swarm of rats is about 25 rats, meaning that 32 swarms is equal to 800 rats swarming the battlefield.
I actually love this idea haha. Too bad it's concentration or you could turn your game into a Plague's Tale tabletop rpg haha
Giant poisonous snake is the same CR, but does 1d4 + 3d6 poison dmg so it would be 32d4 + 96d6. There is also the Dual Focus feat in the taldore campaign guide (1st one) that lets you concentrate on 2 spells. so for at least 1 turn you could have 192d6.
i feel like the sheer volume of rats is a threat itself, imagine suffocating a prisoner with a rat tsunami
@@paullafleche506964 Giant Poisonous Snakes all attacking an AC 19 (average AC of CR 17+ ) creature deals an average of 352-353 damage, which is enough to kill your average Ancient Copper Dragon.
DM: Roll Damage
This Menace: *Throws an entire dragons hoards worth of dice into the table*
DM: Roll Damage
DM's Table: You should not have said that.
This is the most chaotic thing that could have popped up in my subscription feed today…this is absolutely amazing! Hope all is well with the family
I aim to bring golden chaos to all :) All is good! Thank you for asking my friend :)
I feel like the plastic baggies were the payback for the shenanigans you pulled.
Well deserved
00:40 dude just prevented other people from buying aswell😂
Congrats on the twins! Good luck and I wish you lots of well deserved long rests.
Thank you Steph :)
Congrats on the babies! This video of you simply enjoying something fun, and showing the results of your discount was really cool. I've always wondered how much someone can make off of those discount codes. Sending lots of friendship and virtual support! Keep up the good work!
So... since the last episode you went from Goblin Dice Lord to Goblin Dice Dad Lord and now this gives you enough gold to rank up to Dragon Dad Dice Lord.
Your campaign went wild and I'm happy to know that, I know you'll be a great father.
I love it when a campaign falls off the rails... Into gold ;) Good to see you bud!
I'm not only happy to see the dice but seeing you back is nice! I just checked on the channel a week or two ago or something. Be safe out there!
Glad to be back Mccc :) You too!
Not sure why, but I just assumed you were going to melt down all the golden dice and make a new set 😅
Don't tempt me frodo
I thought he was gonna use them as cores for different shells
@@Rybonator _You know full well you want to do it, Rybo_
@@Rybonator Would like to see you try your hand at casting metal dice. You can get a gold melting furnace. They're induction based so need for fuel. They also come with small crucibles and tongs. They're also small enough to fit on workshop table and not take up a lot of room.
They dice goblin is back!!!
I'M BACK BABY
Hope Rybowife and the Rybotwins are doing well! Welcome back.
Doing great! Thanks for asking my friend :)
Congrats on the twins man! Glad to see you pop back up in my feed
GLad to be on it again Tasty :D Thanks!
the ASMR alone on this was wonderful, but saving me from having to do complicated math? You're too kind.
I need to just make a dice ASMR vid at this point
@@Rybonator you should!
Love the video Rybo! Silly/fun videos are just as appreciated as any other video too! So long as you have time for it, we’ll take whatever you got! But I’m sure all us dice goblins fully understand if it takes a while for the next video! Gotta take care of the baby dice gobbos!
Thank you Ben :) I appreciate it. I like doing the silly!
Welcome back, Rybonator! Glad to see you back! I like videos like this, so please keep them coming. Of course, I also thoroughly enjoy the dice-making videos. Looking forward to the redo of the brass shavings dice. I hope the mini Rybonators are doing well! Take care.
Before watching this video I asked myself the question, "Is this shameless clickbait or a just a nerdy impulse purchase?" The stacked cube of dice with the sides all aligned answered that question, I think.
Pssh Impulse Schmimpulse. All I do is think about gold dice.
So shiny!!! Been wondering how you are doing! Glad to see this today!
It's a rough time, but a wonderful time :)
Glad to see a new video from you!
I just made a silicone slab mold and pulled my first set of dice! They are translucent green with a purple swirl, the only thing left to do is get some quality paint to ink the numbers (gold of course). Thanks for making these great videos and giving me the knowledge, inspiration, and confidence to make these dice for myself! Take care of yourself and your family!
OF COURSE GOLD NUMBERS
The numbers on the dice in all different directions in the box was getting to me but you remedied that with your cube. 😁
Welcome back and congratulations on the little ones! ♥️
Edit: OH NO! THE CHAOS! 😵💫
MUHAHAHA - I bring a rollercoaster of emotions! :)
@@Rybonator - I’ll forgive you…this time. 😜
This is the most awesome chaotic way you could ever return after a while of not uploading^^
I do my best to bring a little golden chaos to the internet :p
Rybonator!!!
I missed your channel so much. I've made so many dice this year and it's all thanks to you! I'm even finally making dice with almost no flashing, and I've never been happier as a hobbyist using premade molds. I hope you and your family are happy and healthy, take care!
THE RETURN OF THE KING! Can't wait to watch with Amber when I get off of work! Great to see you back buddy, hopefully everything is going good!
All is good my friend:) exhausted, but happy!
Glad to hear, hopefully Rybowife and the Rybokids are all good as well!
Nice to see ya back! It was fun seeing a sillier video, even if it's not the usual dice making
Glad you liked it :) Have some more ideas for the future!
@@Rybonator That's good to hear! I know the past two years you did some pride dice, any plans for that this year? No pressure if not, it's just always fun to see pride stuff so I was curious
I’ve been checking everyday, great to see you back.
Glad to be back my friend :) Hopefully you'll like what is to come!
This is such perfect Rybo chaos! Thanks for the fun video & thanks to the dice company for having a good sense of humor! 💕
NOW- how do I convince them to restock?
Glad you back and congratulations!
Thank you my friend :) Glad to be back!
Ahh! So glad to see a video pop up from you again! It was a fun little video too, nothing wrong with hoarding gold dice. Embrace your new dice dragon persona. I hope everything is going well with the family and Rybowife and the Rybobabies are all happy and healthy!
Hey it's good to see you back!! I had periodically wondered how things were going, glad to see it's well (if very busy haha)
Busy- but wonderful :) Thanks my friend!
ALL the gold dice! ✨️ 🤩
Welcome back, Rybo, and congratulations on the birth of your kid, hope you're getting some sleep!
Thank you Penjo :) Glad to be back! (Working on the sleep thing haha)
Congrats on the little goblins, goblettes? I bet the metal is Nordic gold, which is a copper alloy with a little aluminum, zinc, and tin. Gold looking coins are often made from it.
That's super interesting- I wonder if it's something purchasable/pourable into a mold?
Also thank you my friend :)
Rybo is back!!! I've been binge watching your videos all week, such perfect timing!!!!
Ayy glad to be back MIchael :)
This was a fun little diversion. Glad to see you back to making content!
Hopefully when you redo that dice set, you'll also show us what failed so catastrophically in the last attempt, because that's super valuable (and often entertaining)!
Absolutely! I made some errors that I shouldn't have- but I've been out of the game too long!
@@Rybonator That's why you're the best, man. You show us the whole process, warts and all. Looking forward to seeing it.
Welcome back! Great to see one of your videos. I hope life's been treating you well.
For the damage:
For melee spells, I'd say a Flame Blade at 6th lvl (5d6) + martial adept feat with trip attack (+1d6). Make sure you're surrounded and have whirlwind attack (hunter archetype ranger) for up to 8 attack rolls. Then have a wildfire druid spirit that casts fiery teleport. It deals an extra 1d6 damage to each creature surrounding you. This 1 turn yields, in best conditions: 7d6 x 8 = 56 d6 damage. To gain this, take 11 lvl's in ranger and then 9 lvl's in druid.
For pure weapon attacks:
Have a 5th lvl paladin with branding smite. Have the martial adept feat with feinting attack (+1d6 and advantage!!!). Have a scimitar equipped (+1d6) or a short sword. Then put the 15 lvl's in rogue (+8d6) and pick arcane trickster. At this point you deal 1d6 (scimitar) + 1d6 (feinting attack) + 8d6 (sneak attack) + 4d6 (4th lvl branding smite) = 14 d6 damage to a single target in one turn.
Don't forget to add a poison to the blade - purple worm is 12D6 extra, though there may be more potent ones. And if your DM goes by the double damage die count critical that is getting stupid, being your 2(14+12)+stat modifiers of damage.
Really glad you are back! Be well and keep making!
Me too my friend :) Glad to be back
Not going to lie... I really lost enthusiasm for making dice over the last few months, and I'm pretty sure it was the lack of regular Rybonator content. I'll take whatever videos you have the time to produce ;)
Wishing you and the family all of the very best!
Ahh man this is both sad and wholesome. I'm glad to be back my friend, but do what makes you happy! :)
@@Rybonator I have a little one too and too many hobbies to boot. No fault at your end, just a bit of a muse. It’s winter down here too and setting resin in my uninsulated shed isn’t great this time of year regardless.
going off of the box at 2:06 , a slight bit of padding and it's only 96 dice for that surface, so you'd need 192 D6 to fill the box, so you're only 8 short of filling the box up
That was fun. I *might* recognize something in your video. Good luck brother!
Ahhh! I was just thinking about your videos yesterday! I let out a little yell when I saw your video. Also this is the best way to make a comeback 😂
Aww that makes me smile :) thank you my friend
Glad you're back dude! Hope the family is doing well :)
Doing great Jon! Thanks for asking :)
Good ta see you, head goblin! This was fun and shiny.
Always happy to provide fun and shines :) Good to see you too!
RYBONATOR IS BACK
How is the family?
Doing great! Twins are a lot to say the least... but wonderful all the same :)
So glad you are back!
Glad to be back Mark! :)
Do you have any plans for the gold dice?
I'd LOVE to do real gold dice one day... but my wallet says no
Dollars to doughnuts the difference in font is that the smaller font d6s are from the polyhedron sets where as the thicker beefer font is from the solo d6 purchases which were likely two different runs of dice.
Makes sense!
"Ok I guess editing isn't going to help" Jokes like this are why I'm subscribed
Edit: "For some context, they weigh about 7.5 pounds which is *roughly* around half the weight of my infant daughter" had me rolling
She needs to gain some weight so I can add more dice to the book and keep that joke accurate :)
Also glad SOMEONE laughed at the edit joke haha
Lovely, sparkly dice. Just so happy to know that your wife and the twins and you are doing well. Thanks for that. (Silly is just fine! Sleep is important!)
Thank you for caring my friend :) They are doing great! And yes! Sleep... oh sweet sleep... I didn't know what I had until twins
ALL the gold dice! Excellent to have you back!
Thank you my friend :) Glad to be back!
Rybonator over the last two years I had learned a lot about dice making from here on this channel. I have recently sold my 50th set and without steps discussed on all your videos I would have never reached this point.
This is beautiful also welcome back
No u :) Also- Glad to be back my friend! :)
OHHHHH FINALLY!!! YOU ARE BACK!
Im sorry, i love to watch your videos so i got excited after so long ;-;
I'm back babyyyy!
I'm glad you are so excited my friend! Thank you for watching :)
Silly video are fun too!
Yay to the stay at home dads!
(And happy fathers day)
Happy Father's Day to you too my friend! :D (A bit early but still)
Mr DM Sir, I'd like to use wish to upcast fireball at 57th level. Can I throw this 7 pound book out now?
... I'll allow it
Guess who's back! Happy to see you dude
Thanks my friend :) Glad to be back
Nice to see you back. 😊 Hope you and youre family are doing well
Doing great my friend :) Thank you for asking
I was just thinking about you this morning wondering how you have been doing. Since my own little one just arrived a few weeks ago I can say from experience that your answer would probably be "Busy."
Busy indeed haha. Congrats to you on the new little one to you as well! :)
4:50 could make a giant d6 out of all of them in-cased in resin
Eyyyyy welcome back! Hope you're doing well!!
Glad to be back my friend! Doing great- hope you are as well :)
Congrats on your little ones!
Thank you! They rock and suck at the same time haha :)
@@Rybonator I have 6. That never changes.
I discovered your channel in the last month or so and I am so glad to see new content.
Here's an idea. Cast a giant D6 out of 36 of the little D6's. Make a Mega D6.
It actually took 125 to make that cube I showed!
Also glad you like what I'm making my friend:)
Glad to have you back in my feed! I've missed the dice chaos lately.
Awesome to see you back Rybonator, I missed ya being in my feed!!!
I've been thinking of getting into casting table top minis out of cultured marble.
Have you had any experience with the stuff through your hobbies?
I've worked with resins before but I'm just looking for tips before I commit to ordering a big bag of powdered marble from overseas.
I was one of the ones that bought dice using your link. I'm very satisfied with what you've done here 😂
Good good- I hope I did you proud
That's a lot of masters.😯 With so many, you should do a giveaway.😁 Who needs 16 identical D&D sets? 😕Sixteen different sets, oh yeah! 😃
You think I am giving away gold!?
Maybe in person at an event some time :p
I love the casual reference to the infant. Great to see ya back and it's absolutely hilarious you got to abuse the absolute crap out of your referral code!
It's just so beautiful...
I remember theorycrafting massive damage once with some friends for a one-shot. It involved a couple class features, prone, crit, and falling damage. it was something like over 1k average damage, but I can't remember the specifics.
Welcome back. Any chance on seeing new ocean dice, or the playing card dice soon?
You have enough to play a Champions game.
They're on my list!
largest amount i've seen from a single attack was when in my game the paladin was fighting the bbeg's right hand bruiser in the sky (both on flying mounts) and tackled him off, causing them both to fall like an entire mile
I am so excited to be getting notifications for you again! ❤
Thank you Ross :) Glad to be back on your feed!
Congrats on the Baby-nators!! So happy to see you back and still as goofy fun of a dice goblin as ever!
Rybonator turning into the DM we all fear
No one without the gall for a TPK has that many D6s
Don't test me players. I'll quite literally throw the golden book at you.
Welcome back. Hope baba is doing well 💜
The babas are exhausting and amazing at the same time
Glad to see you had some time to give us a video. I do miss seeing your content. While I may prefer you making stuff type videos (fail or success) this was fun. Hope the twins are doing well and your wife has had the time she needed after. See you when get a chance!
How about some gold leaf dice? Not gold leaf mixed into the resin but inner cores made with ressin then propperly gold leafing all the sides and then a protective resin shell
PS i am currently obsessed with the Amethyst D20 by Hedron Rockworks
Now you need to hit those with tripoli, rouge, and a clean buff to give them a mirror finish!
I didn't know I could do that... YES
Watching those d6's getting pushed off made me smile! lol
Someone is Chaotic Neutral
He's clearly a Metallic Gold Dragon that has merged with either a Chromatic Red and or a Gem Ruby Dragon (might be a combo of the three, gold in the middle, red to the right and ruby to the left.) , given greater power than we can even imagine and ascended into a godhood with that massive roll.
great to have you back, and great to have it be with so many golden wonders
Part of me wants you to glue all those dice into a single cube and cast around it. 😅
I have thought about it- but the swag of rolling up with a gold dice tray MADE of dice outweigh the large d6 to me haha
Oh glue is the wrong move. RyboDragon needs to cast 5x5x5 d6 into a massive resin block! Imagine rolling *that* at the game table! ;-)
Welcome back, hope the kids, mum and you are all doing good!
Could you show us how to make loaded/weighted dice?
Outside of spells, my mind immediately went to sneak attack damage, but even a 19th/20th-level rogue on a crit only gets 20d6, and Meteor Swarm does twice that.
This is so unhinged. I love it so much.
I aim to bring golden chaos
Oh my god the dice goblin leader is back!
And he comes bearing gold! :)
I appreciated that you “jingled” the dice before rolling. The click clack in your hand was brain scratching ❤
I could just see you showing up at a convention with several suitcases full of dice for 'Iron Man' D&D.
Whenever a Natural 1 is rolled on a die during the game, that die is retired for the rest of the session, and if a player runs out of dice thats it, their character faints and is done.
so great to see you posting again! hope you and the family are well xx
Congratulations on your twins! I like variety, so this video was interesting to me. I also like the dice making, and mold making videos.
Who doesn't like a great video on a buttload of dice! (I've missed any video from you so thanks for rolling one out for us) BTW you are indeed a Dice Lord for that many gold D6s! Here's hopping you all roll high and fair!
I haven't played a high level necromancer build yet, but theoretically, you could be throwing that many dice for all your undead minions if your DM has them attack in one go for time's sake.
I wonder if it would be possible to just make the very tops of the dice. Do that a couple dozen times, glue them down and resin over the top
my mans really said "I'll take your entire stonk"
dropping a barrel of pebbles from a very large height to a crowd of very closely standing people.
You have to have special rule in place where a mob of people are counted as a single entity. (i have seen that used for swarms of insects)
A new video 😍 Welcome back! We missed you 🥳
Missed you more!
So happy to see you posting again! You are my 5 year olds (and my) favorite wholesome TH-cam content! ❤
Aww that's awesome! Tell your kiddo that Rybo says hello and hope that they have a fantastic day tomorrow! :)
3:45 this is how I feel when sneak attack
AND crit ;)
Hey Rybonator I've been recently binging your content and it's inspired me to get into making dice sets myself. I was wondering with the gear you have to make your stuff would you still recommend the 1.5 ablaze vacuum chamber and the original pressure chamber or would you recommend different sizes/ brands?
The California Air Tools Pressure pot is great and doesn't have all the finicky work of the harbor. Recommend that.. Also don't need a vacuum chamber. Just the pressure and a compressor.
Druid Craft below hit it on the head- You don't need a vacuum chamber. A pressure pot will do both jobs. Go with a california air tools if you can afford it, if not you can do harbor freight as a more budget option. Check out my making a pressure pot video- it's accurate on how to make the pressure pot, though in it I do say you need a vacuum chamber too- just ignore that. It's old info
@@Rybonator what about getting the bubbles out of your self made silicone molds? I thought the vacuum chamber was needed for that.
@@Phantomtkd Just use a pressure pot instead! Pour the silicone, and then put it in the pressure pot while it cures and you should have 0 issues :)
@@Rybonator ok thank you :)