Dude you skipped so many steps it would have to be a longer tutorial to cover everything you skipped. And what is with the zooming into certain spots and layering the videos? I can't see anything you're doing.
Just some honest feedback here: While your results are amazing and just what I was looking for. Like others have said, as advanced blender user this was very hard to follow. I would love to see this tutorial with less cuts and editing and a more clear layout of how to do this. The blender files are amazing, thank you for that: But It would be awesome if you could briefly talk about what's included with them and how to use them to get things going on our end. Thank you for doing this, again just some helpful feedback. Hope you revisit this topic as it's really needed in the blender community. Most blood splatter tutorials are very dated and your results look great.
you sure you're an advanced blender user? I saw this video, and then checked out the files and was able to apply the same to my own project, starting from scratch, and im a novice
Yo dude, just followed this tutorial and I have no idea what these other comments are saying. Everything was easy to follow and I got a very similar result. To beginners, please understand that not every tutorial is made for you. You might need to learn a little to follow something, but that's okay! It's all part of the journey.
love this tutorial definitely helped out alot best splatter tutorial I've seen! Anyone that was having issues seeing the results after baking like me go down to the mesh section and click bake and that should fix the issue since mine came out a red cube.
yes, also if you all are using this in your own simulations and are using different start and end keyframes which are somewhere in the middle of your timeline (say start at 20 and end at 50 frames), you might notice that there is a cube for the duration before your simulation. To get rid of this you could a) try deleting those frames by going into your cache folder (remember to create a cache folder somewhere where you can remember, and not rely on the temporary cache folder that blender creates on its own, also i have not tried this in theory this should work, but it might end up breaking your simulation as well) or b)set a keyframe for render visibility to be off till your start frame.
At various times I can't see where I clicked to get to a specific panel. The edition already shows the panel open without showing how it arrived. In domain, for example, it starts with an open panel without showing how it got there.
Perhaps I'm just dumb, but couldn't follow this as a beginner in blender simulation. Spent 5 minutes figuring out he clicked the Liquid Domain object to get to those tabs at 1:29. Then got completely lost at 2:20 cause I have no idea how to run the sim.
You're not dumb, it's just not a beginner's tutorial. In the domain, you need to bake data, and bake mesh, to get the full sim generated. From there, you can move your playhead along the timeline to scrub, or you can simply play it to see it run in the entirety.
the liquid is not simulating even tho ive done all the settings. when i preview scene is it just a solid cube of the liquid domain. is there something i haven't checked ?
hey pal iv been messing around with some settings trying to fix this and it might be because your setting the quick liquid to multiple object (maybe) ill update you once i fully figure it out
Имейте ввиду что для иностранцев которые захотят повторить этот тутор будет ну очень сложно. Лучше бы показывали как надо и без обрезок и редактирования в видео. Так бы было бы много лайков и просмотров, а пока что я очень огорчен что не до конца могу понять что вы там делали.
I don't know what drugs this dude has taken but there's nothing to understand. You just configure the direction by selecting one of the Ico spheres -> Physics Properties -> check Initial Velocity and chose the axis below for the direction. you just put that 25 m/s or whatever in the axis you want it to go. You can enter negative values there because each axis obviously has two sides it can go (left / right, up / down, etc...).
@@P4nem___Et___C1rcenses I love drugs, i just started to play in the physic tabs and im no good at school. Thx for taking the time to answer. I highly appreciate.
Getting something really wacky happening with mine. When the volume scatter color is red, the blood shows up as cyan- i am setting the volume scatter to cyan to compensate. Any solution other than that?
This is pretty cool man thanks for that tute. Just one thing, as soon as I go to scale the domain, the blue dots/balls disappear. Is there a way to get them back? The only way to get them back is if I close and restart Blender which is pretty counter productive lol
I don't get it why you have to make this so confusing. I follow every step but have never seen you bake anything. Since you do shader with the blood already I suppose you bake it before. So I did it, and then? I can't select any blood. I have a big fucking box as domain and inside the ico spheres. I see the animation playing but can't select any of this blood. Jumped over from the old videos where every one complained that they can't understand shit and wasted another 20 min trying to figuring stuff out. gg.
Honestly I agree. I'm literally sitting here like wtf is this guy doing? It's going too fast, and i'm not a complete beginner to blender. I can't follow up on what he's doing and he's talking so fast I'm just sitting here completely lost.
Thank you for this awesome tutorial and reference files! I can't seem to get the shader for the particles to render properly, whenever I attempt to render the particles they show up in a Hot pink hue. Any tips or solutions you can provide will be much appreciated :). Thanks again!
focus first on the step by step pls. there are some parts where it just suddenly jumps. make tutorials as if your talking ot a 5 year old. no skipping :(
your tutorials are remarkably confusing and difficult to follow. you should really explain your process more thoroughly rather than just skim through everything. this was a super frustrating tutorial to get through and had to constantly rewind. had to leave a dislike.
Awesome, thanks for the tut my brotha... I'm working on a challenge, I chose a horror theme and naturally I needs me some blood splatter! Feel free to check the PG version on my profile, I'll be using this tut to help me flesh out my render if you will ;) I appreciate ya, def liked and subbed!
thew point of tutorials is to treach ppl stuff lmao. also if we cant understand his accent and dont comprehend the steps he's skipping thats called constructive feedback and will filter quality into his tutorials
Likes to dislikes so far.
Date | Likes | Dislike | %
Jan 07, 2022 | 175 | 5 | 97.2
currently 1.2k likes 57 dislikes
Brother, this is incomprehensible.
Dude you skipped so many steps it would have to be a longer tutorial to cover everything you skipped. And what is with the zooming into certain spots and layering the videos? I can't see anything you're doing.
Just some honest feedback here: While your results are amazing and just what I was looking for. Like others have said, as advanced blender user this was very hard to follow.
I would love to see this tutorial with less cuts and editing and a more clear layout of how to do this. The blender files are amazing, thank you for that: But It would be awesome if you could briefly talk about what's included with them and how to use them to get things going on our end. Thank you for doing this, again just some helpful feedback. Hope you revisit this topic as it's really needed in the blender community. Most blood splatter tutorials are very dated and your results look great.
you sure you're an advanced blender user? I saw this video, and then checked out the files and was able to apply the same to my own project, starting from scratch, and im a novice
agreed
Man, first of all
Привет
You've got not just good content, but the way you present it
Keep it up
Thank you, I'm glad you liked it!
Yo dude, just followed this tutorial and I have no idea what these other comments are saying. Everything was easy to follow and I got a very similar result.
To beginners, please understand that not every tutorial is made for you. You might need to learn a little to follow something, but that's okay! It's all part of the journey.
love this tutorial definitely helped out alot best splatter tutorial I've seen! Anyone that was having issues seeing the results after baking like me go down to the mesh section and click bake and that should fix the issue since mine came out a red cube.
yes, also if you all are using this in your own simulations and are using different start and end keyframes which are somewhere in the middle of your timeline (say start at 20 and end at 50 frames), you might notice that there is a cube for the duration before your simulation. To get rid of this you could
a) try deleting those frames by going into your cache folder (remember to create a cache folder somewhere where you can remember, and not rely on the temporary cache folder that blender creates on its own, also i have not tried this in theory this should work, but it might end up breaking your simulation as well) or
b)set a keyframe for render visibility to be off till your start frame.
just a note, for physically accurate blood (and other liquids), you would want to use a volume absorption node and not a scatter node
can barely comprehend what you are saying or what you are doing from the pace lmao
Yeah, half of his words just skipping around like we already know what we were doing lmao
This is so beautiful
At various times I can't see where I clicked to get to a specific panel. The edition already shows the panel open without showing how it arrived. In domain, for example, it starts with an open panel without showing how it got there.
1:29 what set cache to modular...show which panel man, u know how many panels are there?
I was also lost in this edition that doesn't show the way.
0:44 by pressing N (nothing happens) and pressing the ??what?? emitter?
the sound had just killed every earpiece users.
would you happen to know how to make high velocity blood splatter?
Perhaps I'm just dumb, but couldn't follow this as a beginner in blender simulation. Spent 5 minutes figuring out he clicked the Liquid Domain object to get to those tabs at 1:29. Then got completely lost at 2:20 cause I have no idea how to run the sim.
Same
You're not dumb, it's just not a beginner's tutorial. In the domain, you need to bake data, and bake mesh, to get the full sim generated. From there, you can move your playhead along the timeline to scrub, or you can simply play it to see it run in the entirety.
Hello, I've already watched the video 12 times, but somehow the simulation of the blood doesn't work. Can you help me?
Excellent video!
the liquid is not simulating even tho ive done all the settings. when i preview scene is it just a solid cube of the liquid domain. is there something i haven't checked ?
Same Problem here
same
hey pal iv been messing around with some settings trying to fix this and it might be because your setting the quick liquid to multiple object (maybe) ill update you once i fully figure it out
Hey not sure if you figured out the solution but you have to bake the mesh in the domain setting after baking the data!
Thank you so much dude!
everything has render on in outliner, but the liquid does not render, any thoughts?
where is the quick liquid?
I could not understand ? could you please make a video step by step?
oh here it is
How to increase max size of domain ? because scale broke my sim
great video
Имейте ввиду что для иностранцев которые захотят повторить этот тутор будет ну очень сложно. Лучше бы показывали как надо и без обрезок и редактирования в видео. Так бы было бы много лайков и просмотров, а пока что я очень огорчен что не до конца могу понять что вы там делали.
Great tutorials! But the music makes it a bit harder for me to focus/understand
How I make the blood freezing ?
I wish i could understand the direction part.
I don't know what drugs this dude has taken but there's nothing to understand. You just configure the direction by selecting one of the Ico spheres -> Physics Properties -> check Initial Velocity and chose the axis below for the direction. you just put that 25 m/s or whatever in the axis you want it to go. You can enter negative values there because each axis obviously has two sides it can go (left / right, up / down, etc...).
@@P4nem___Et___C1rcenses I love drugs, i just started to play in the physic tabs and im no good at school. Thx for taking the time to answer. I highly appreciate.
0:24 didn't show the quick
Followed every step exactly but didnt get it to work
Getting something really wacky happening with mine. When the volume scatter color is red, the blood shows up as cyan- i am setting the volume scatter to cyan to compensate. Any solution other than that?
whats the quick fluid hot key for mac..i dont have f3
select 'use F keys as standard function' in your keyboard settings
Blood do be thick tho😂😂😂😂😂
This is pretty cool man thanks for that tute. Just one thing, as soon as I go to scale the domain, the blue dots/balls disappear. Is there a way to get them back? The only way to get them back is if I close and restart Blender which is pretty counter productive lol
It won't let me make the shader, 0 contribute your tutorial -..-
pls stop skipping steps
Don't waste your time on this tutorial, literally impossible to follow
I freakin loved this tutorial i learned alot and your editing is top notch bro keep it up!
I followed ur tutorial but nothing is happening at all.
what was that?
I don't get it why you have to make this so confusing. I follow every step but have never seen you bake anything. Since you do shader with the blood already I suppose you bake it before. So I did it, and then? I can't select any blood. I have a big fucking box as domain and inside the ico spheres. I see the animation playing but can't select any of this blood. Jumped over from the old videos where every one complained that they can't understand shit and wasted another 20 min trying to figuring stuff out. gg.
Honestly I agree. I'm literally sitting here like wtf is this guy doing? It's going too fast, and i'm not a complete beginner to blender. I can't follow up on what he's doing and he's talking so fast I'm just sitting here completely lost.
For the algorithm.
I greatly appreciate you helping out that way 😊
Thank you for this awesome tutorial and reference files! I can't seem to get the shader for the particles to render properly, whenever I attempt to render the particles they show up in a Hot pink hue. Any tips or solutions you can provide will be much appreciated :). Thanks again!
You want to make sure your scatter output plugs into the volume pin of your output node, not the color of your bdsf node.
that’s eikd
focus first on the step by step pls. there are some parts where it just suddenly jumps. make tutorials as if your talking ot a 5 year old. no skipping :(
nvm got it
wtf u saying bro 😭
your tutorials are remarkably confusing and difficult to follow. you should really explain your process more thoroughly rather than just skim through everything. this was a super frustrating tutorial to get through and had to constantly rewind. had to leave a dislike.
Blender 2.9? How to do blood splater in blender 2.83?
Awesome, thanks for the tut my brotha... I'm working on a challenge, I chose a horror theme and naturally I needs me some blood splatter! Feel free to check the PG version on my profile, I'll be using this tut to help me flesh out my render if you will ;) I appreciate ya, def liked and subbed!
It’s really hard to learn from your vedio can you explain slower
Holy shit turn the bass down on your microphone
ладно лучше пнг
ахха, досвидания оньен)
had a really hard time understanding what you are saying
Bro, you're shooting everything fine, don't pay attention to this whining. Who does not understand, let them do something else
thew point of tutorials is to treach ppl stuff lmao. also if we cant understand his accent and dont comprehend the steps he's skipping thats called constructive feedback and will filter quality into his tutorials