Not double the speed though, when you add your weight, your momentum will go high enough that that amount of friction is neglected, for momentum is the ability of an object to keep a speed and neglect friction. Also you have wind resistance, wheel rolling resistance. In conclusion: Does better bearings make you ride faster? Yes Is it noticable? No Plus penny bearings are already good to begin with. My suggestion is to wear them out before replacing them.
I’d want a penny board REAL bad! Had a long board but has broken down... hopefully I can win this penny.. Subscribed along with post notifications turned on. Good luck mate. Hope you reach 2k subs soon
I’m watching this knowing gosh dang well I have no chance of getting one these, but it’s nice that some people are able to have these because they seem fun :)
I currently have mini logos in mine. I grabbed them after I got my penny and the guy at the skate shop just swapped them for me. Well I haven’t been using the board for a while and I go to pull it out, disassemble and clean it. And it has all 4 outer washers missing, and no spacers 🙃 and I never even knew. Feel like I just need to swap to reds and get some new washers and spacers while I’m at it. Kinda salty though, I guess it could have been a factory issue with Penny.
damn homie that’s lame... im giving away a brand new Penny Board at 2,000 subscribers and I promise it comes with all the factory washers and spacers 🙈
Hi Jase! I'm having problems with my wheels. One wheel is too slow even though the nut is loose while the other 1 is faster than the rest. What should I do?
look for a tutorial on cleaning and lubricating the bearings easiest way: buy kerosene and machine oil/skateboard bearing lubricant, put a bit of kerosene in a glass container, enough for all the bearings to be submerged (even though the others seem fine) and leave it overnight next day you pull them out from the kerosene, use some paper towel to dry the excess fluid, then spin them with your fingers as fast as you can for a few seconds each, this will get rid of most of the fluid, then apply the lubricant of your choice (i use standard machine oil) and install them back seems complicated but it's still easyer than removing the little plastic inside the bearing that holds the little balls, if you're willing to do that (your bearing can't be metal sealed from both sides though, most skateboard bearings aren't but some shops sell generic metal bearings on their skateboards), then you can use dish soap and water, there are some videos teaching how to remove this little plastic thing i'm talking about
i just restored some 10yo reds my brother replaced a while ago, some of them were very sticky i removed that white plastic on the inside, cleaned everything, lubed it and it's still going fine, a bit noisy of course but still rolls freely for a long time, i installed them on my penny, on my standard skateboard i'm trying independent bearings and they are allright too
@@blockmanufacturer714 idk the whole board seems fake and not manufactured by penny so idk but i changed my pennyboard bearings with fidget spinner bearings now they spin for half a minute and i actually catch speed now :D
Watched this vid a couple weeks back cuz I was looking for good bearings for my penny board of 7 years. Sad to inform you that my penny board got ran over by a car... :(
weight of cargo/ rider , wind/environmental conditions factoring in , moisture effects , lubricity , all seem suspiciously absent from your science processes. Misinformation is heinous. (Just start by learning how to properly install a set of bearings on skateboard trucks ( cringe) respectfully,might go a long way if you're posting skateboard related stuff ...
unbox therapy but actually chill and not a scammer
Not double the speed though, when you add your weight, your momentum will go high enough that that amount of friction is neglected, for momentum is the ability of an object to keep a speed and neglect friction. Also you have wind resistance, wheel rolling resistance.
In conclusion:
Does better bearings make you ride faster? Yes
Is it noticable?
No
Plus penny bearings are already good to begin with. My suggestion is to wear them out before replacing them.
damn homie that’s a whole lot of science
he was joking
@@vdfritzzI guess I read the setup, but what was the punchline?
@@vdfritzz no he is not
Bones reds maybe the best budget bearing but bones Swiss and Bronson G3 are a better/faster bearing.
I'm so mad you don't have so many view & subs, your content is good, your video editing is absolutely professional...keep it up🔥
thank you homie that’s a nice ass thing to say 🙏🏻 i’m fired up you’re enjoying the videos :)
Penny boards seem cool! I really want one.
stay tuned for the giveaway!
I’ll try bro, thanks, good vibes from Mexico 🇲🇽
damn i wish i was in Mexico rn
I’d want a penny board REAL bad! Had a long board but has broken down... hopefully I can win this penny.. Subscribed along with post notifications turned on. Good luck mate. Hope you reach 2k subs soon
my g ❤️ thank you for subscribing and turning the bell on. fingers crossed for you homie, see you at 2k 🙏🏻
Unfortunately double the spin doesn’t translate to double the speed 💁♂️ maybe about 30-50% faster. That’s why you should have tested it outside :)
speed matters less. Think about how much less you have to push with better bearings.
On my penny board I just use stock, and I love it. In my Alva boards I use bones Swiss. And they are killer.
I’m watching this knowing gosh dang well I have no chance of getting one these, but it’s nice that some people are able to have these because they seem fun :)
Solid video bro!!! Love from Malaysia 🇲🇾
thank you Jeremy! Malaysia sounds dope, i’d love to visit one day 🤞🏼
I currently have mini logos in mine. I grabbed them after I got my penny and the guy at the skate shop just swapped them for me. Well I haven’t been using the board for a while and I go to pull it out, disassemble and clean it. And it has all 4 outer washers missing, and no spacers 🙃 and I never even knew. Feel like I just need to swap to reds and get some new washers and spacers while I’m at it. Kinda salty though, I guess it could have been a factory issue with Penny.
damn homie that’s lame... im giving away a brand new Penny Board at 2,000 subscribers and I promise it comes with all the factory washers and spacers 🙈
great video and exact same board I got too! Definitely putting Bone Reds. I wonder about the tracks, are there any mods to do?
Bones Reds for sure and I also like my trucks a little tighter than they come stock. other than that tho everything else stock is the way to go!
Hi Jase! I'm having problems with my wheels. One wheel is too slow even though the nut is loose while the other 1 is faster than the rest. What should I do?
look for a tutorial on cleaning and lubricating the bearings
easiest way: buy kerosene and machine oil/skateboard bearing lubricant, put a bit of kerosene in a glass container, enough for all the bearings to be submerged (even though the others seem fine) and leave it overnight
next day you pull them out from the kerosene, use some paper towel to dry the excess fluid, then spin them with your fingers as fast as you can for a few seconds each, this will get rid of most of the fluid, then apply the lubricant of your choice (i use standard machine oil) and install them back
seems complicated but it's still easyer than removing the little plastic inside the bearing that holds the little balls, if you're willing to do that (your bearing can't be metal sealed from both sides though, most skateboard bearings aren't but some shops sell generic metal bearings on their skateboards), then you can use dish soap and water, there are some videos teaching how to remove this little plastic thing i'm talking about
BONE REDS LAST LAST LONGER THEN THAT. I USED TO JUST ROCK BONE REDS ALL THE TIME.🤙🏼
i just restored some 10yo reds my brother replaced a while ago, some of them were very sticky
i removed that white plastic on the inside, cleaned everything, lubed it and it's still going fine, a bit noisy of course but still rolls freely for a long time, i installed them on my penny, on my standard skateboard i'm trying independent bearings and they are allright too
so my fake pennyboard has better bearings than the original? mine spins for 7,48 seconds abec9's but those are coming apart and i need reds xD
if your pennyboard has better bearings then maybe it's not fake
@@blockmanufacturer714 idk the whole board seems fake and not manufactured by penny so idk but i changed my pennyboard bearings with fidget spinner bearings now they spin for half a minute and i actually catch speed now :D
@@insidius999 my wheels in penny is kinda different so idk if it's my bearings or the wheels, I have jelly wheels
Ahh I need one more penny board cuz my old one amm... Broke
This guy has his own physics laws hahah. Quick answer to avoid all this video: what really makes you go faster is how hard and big your wheels are.
dang lol my stock bearing only goes 2 seconds
nice video!! i already subscribed for more amazing content.
my g
Plsss do more penny board videos!!
more Penny Board videos on the way!!
the bolt too tight, loosen it more cuz the wheels suddently stop 5:31
Ayo, can anybody help me it would be much help. I was wondering if i could use 81a soft bushings for my penny board?
Not the best way to conduct a scientific experiment but a great video regardless.
Hey jasey, so you got 2k subscribers. I'm waiting to my Pennyboard giveaway 🙄
Cool👍👍
thank you! 🙏🏻
Watched this vid a couple weeks back cuz I was looking for good bearings for my penny board of 7 years. Sad to inform you that my penny board got ran over by a car... :(
It broke really
@@natsugaming1984 yeah a Ford F-250 ran right over the front and demolished the trucks and upper part of the deck :/
@@speedycs2085oh a frickin truck
He looks like unbox therapy
Lew is my dad
@@dayswithjase nah
Bro, you're a beginner, but u have a very good video.. deym
thank you homie 🙏🏻
Been dreaming of a penny board? Steal one from walmart
THATS WHATSHESAID
😩😩
Subbed for my new penny board 😀👍 awesome video though
Luv u
my g ❤️
у меня 18 сек крутяться )
Subscribed! I wanna win one!
thanks for subscribing! good luck :)
New sub, hope I win the Penny :v
thank you for subscribing! good luck homie 🤞🏼
Jasey my cousin is a huge fan of yours and I wonder if you could give him the penny board it’s will really make his day….thank you
weight of cargo/ rider , wind/environmental conditions factoring in , moisture effects , lubricity , all seem suspiciously absent from your science processes. Misinformation is heinous.
(Just start by learning how to properly install a set of bearings on skateboard trucks ( cringe) respectfully,might go a long way if you're posting skateboard related stuff ...
Bronsons are better
oooo I’ve never tried Bronsons! I’ll have to get a pack