Thanks for your reply , I appreciate it my other question -if you allow - is the temperature of steam should be stable, 100 Celsius in all process time , or as you said in the video you should reduce heat after while , the flow circle of water could reduce the temperature.
I just received my new LT3000. The column is slightly flattened in one small plane about .5 inches wide along the height of the column. Is this a problem? Should I return it? Thanks for your wonderful videos.
You say available in 6 countries. Is Australia one of these or do you have to order from the US? How much for the unit displayed here in Australian dollars including postage. Can you give a cost breakdown for the various components. Would like Australian dollars if possible. A bit worried about ordering from the US because of the current supply issues in the US.
Pot has a pressure relief valve. If pressure built up the valve will make whistle and user should turn off heat right away. When operating following instructions there should not be pressure inside pot. Use loose herbs and no powder. Good question!
Hi there are two groups of sulfur possible in water. Sulfite is salt which can be removed by distillation. Hydrogen sulfide is volatile and it can be vaporized during distillation. Hydrogen sulfide has rotten egg smell. You can notice it.
Hi, this is a good question. There are some research on effect of temperature on yield using microwave assisted distillation. By using steam distillation under normal pressure the temperature of steam will be stable, 100 Celsius so the change in heating power won’t change the quantity or quality of oil but they will change the duration of time of distillation. Lower power will make it longer. Let me know if you have any questions.
I just processed some fresh picked rose petals and used this distillery to make rose hydroSol. It turned out amazing! It smells so good and makes my skin feel great!
The distillation pot is very pretty and compact
Thank you!
Where i can buy the destilation eq. I'm from Indonesia. Thx a lot
Thank you ...you explained the thought with very clear and simple way ....
Thank you!
Regards from Syria
Thanks for your reply , I appreciate it my other question -if you allow - is the temperature of steam should be stable, 100 Celsius in all process time , or as you said in the video you should reduce heat after while , the flow circle of water could reduce the temperature.
Can we use this hydro sole to make soap
I just received my new LT3000. The column is slightly flattened in one small plane about .5 inches wide along the height of the column. Is this a problem? Should I return it?
Thanks for your wonderful videos.
Please send me a picture of it. Thank you for your message.
@@LeTimeLeo will do
For water circulation can use tap
You say available in 6 countries. Is Australia one of these or do you have to order from the US?
How much for the unit displayed here in Australian dollars including postage.
Can you give a cost breakdown for the various components. Would like Australian dollars if possible.
A bit worried about ordering from the US because of the current supply issues in the US.
what happens if the pressure inside is too big? will the pot explode
Pot has a pressure relief valve. If pressure built up the valve will make whistle and user should turn off heat right away. When operating following instructions there should not be pressure inside pot. Use loose herbs and no powder. Good question!
Plz tell us how much water what degree heat and what duration
Where can I get the distillation kit?
Hi, this is the website: www.letimestill.com
Can you distill well water of Sulphur and get clean distilled water?
Hi there are two groups of sulfur possible in water. Sulfite is salt which can be removed by distillation. Hydrogen sulfide is volatile and it can be vaporized during distillation. Hydrogen sulfide has rotten egg smell. You can notice it.
Whats that motor in water?
Whats the cost of it.
do you think there is any influence of source of power (electric or gas ) on the quality of oil
Hi, this is a good question. There are some research on effect of temperature on yield using microwave assisted distillation. By using steam distillation under normal pressure the temperature of steam will be stable, 100 Celsius so the change in heating power won’t change the quantity or quality of oil but they will change the duration of time of distillation. Lower power will make it longer. Let me know if you have any questions.
Cost of it
What type of water pump are you using?
It is a small aquarium pump. It is better to have one with adjustable flow or using a valve.
Show on gas burner
Where can I buy one
Hi, this is LETIME LT3000 distiller which is available on our website: www.letimestill.com .
Plz show roses.
I just processed some fresh picked rose petals and used this distillery to make rose hydroSol. It turned out amazing! It smells so good and makes my skin feel great!