Awesome video! At first, I was skeptical since it had no voice, but the caption does it all! I don't believe this video was watched over 13,000 times but only 22 people had commented on this video. You saved me $50 for a replacement blender! Much thanks!
Thx for this tutorial! A heads up for people who do this for the first time: the original parts are WAY tighter than these 😅 Had to get some proper tools to open them
Oh thank you. I thought I was gonna have to throw it out. We normally leave stuff on the wall outside , if people can fix them have them. Times are hard I have to fix my stuff now. Thank you so much. X
Just what I needed. Mine had a qc sticker over slot on bottom of the Magic Bullet so I had no idea the screwdriver slot was there. My plastic gear cracked so replacement might've been easier since I could lock onto brass nut with channel lock pliers. Great community answering other questions too.
ปีที่แล้ว
Keep posting videos like this one! This was both extremely helpful and very relaxing to watch. There’s some ASMR folks that would love to watch this.
I'm missing one of the circles at the bottom that holds the base stable. I've looked all over the internet but couldn't find any piece. Any idea on where i can find those?
Question about one of the blade peace. Does it have a metal washer between the rubber peace and the golden part attached to the blade peace? Mine has a washer and it seems very wore out. Should I replace it too. Thanks!
The unit with the blade. That gear seems to be mineralized to the shaft. Basically the inside of the screw is minerlized so I can't remove the black runbber gear. Should I ty soaking it in vinegar? KI don't want ot spray WD 40 on it because it's near food. Thanks!
Sorry I did not see your comment sooner I do not come on here very often. Yes you can soak it and vinegar it will help dissolve those minerals and you can wiggle it back and forth to help loosen it up good luck
Sorry unable to do the way shown by you, the plastic part in blender just doesn’t more and also the grove on screw has worn off unable to hold a screw driver any more.. any other method possible ? Please help…. Thanks
First make sure you are turning it the right way. It is the opposite of normal, "turn to the right to remove not the left. If you already did that you will have to take the bottom off. Turn it upside down, pull the little rubber feet out there are screws hidden behind them. remove the bottom and try again. might have to use channel locks to hold it. good luck!
I don't know if anyone else has same issue but with mine it turns on straight away without putting anything on as soon as I plug it in its like the pressure plates are broken on it anyone know how to fix this?
Sounds like you will have to disassemble your Magic Bullet. Do the white bars spring back or are they stuck down? Clue two of them will click when you depress them to switch on the motor the switches might be broke. You will have to completely disassemble and replace the if you can find them might be better off just buying a new one.
Had my 1st Magic Bullet for years. Just got a new one.. One 3rd run, the plastic gear shattered. I bought the new parts which arrived today....HOWEVER, I just noticed the new MB doesn;t have the opening at the base to access the screw. Sigh.
I have had mine for nearly 15 years now and have changed the gear and rubber parts a few times. Today though I realised: 1. the little rubber feet come out and are hiding screws which makes it much easier (or even possible if the screw has blown out or if yours doesn't have the slot) to remove the cog - use a well folded tea towel to hold the flywheel in the bottom of the unit and pliers or locking pliers on the plastic cog. If it doesn't seems to budge, try going the other way :D and 2. These things are some of the best made appliances of all time. I have been saying I'd buy another one in a heartbeat if mine broke for at least ten years now and it looks like its still got plenty of life left in it now. Magic Bullets rule!!
I got them on Amazon you can just put Magic Bullet base gear and it should come up..... this link should get you there thanks.... www.amazon.com/Magic-Bullet-Blender-MB1001-Replacement/dp/B07CGKK21J/ref=mp_s_a_1_3?crid=NTU4C1CJKVW6&keywords=magic+bullet+base+gear+replacement&qid=1680134681&sprefix=Magic+Bullet+replacement+gear%2Caps%2C595&sr=8-3
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
Exactly what I needed no fluff and time wasting. Straight to the point. Time efficient. Thank you, much appreciated.
Kudos on showing this!! Made me nervous that it was still plugged in while you fixed it... thanks
This video was AWESOME.! Very clear and loved the demo. No music. No talking. Perfect!!!! Thank you!!!!!
Just creepy, stalker, phone calling breathing. But yes. Straight to the point, no fluff.
You just saved us $40+ for a new machine, THANK YOU!
Awesome video! At first, I was skeptical since it had no voice, but the caption does it all! I don't believe this video was watched over 13,000 times but only 22 people had commented on this video. You saved me $50 for a replacement blender! Much thanks!
Thx for this tutorial! A heads up for people who do this for the first time: the original parts are WAY tighter than these 😅 Had to get some proper tools to open them
Oh thank you. I thought I was gonna have to throw it out. We normally leave stuff on the wall outside , if people can fix them have them. Times are hard I have to fix my stuff now. Thank you so much. X
Thank you! I've had my Magic Bullet for over a decade and the base gear broke. So glad to know all I need is a new gear!
f
Just what I needed. Mine had a qc sticker over slot on bottom of the Magic Bullet so I had no idea the screwdriver slot was there. My plastic gear cracked so replacement might've been easier since I could lock onto brass nut with channel lock pliers. Great community answering other questions too.
Keep posting videos like this one! This was both extremely helpful and very relaxing to watch. There’s some ASMR folks that would love to watch this.
Thank you. This helped me a lot!! Turn to the right. And I was not aware of the screw slot on the bottom.
Thank you for the simple instructions.
Thanks for this tutorial 🙏
Same issue as mine. Thanks for this!
Thank you. Straight to the point
Thanks a lot, this video just made my day.
Did you do all that while it was plugged in?
Thanks for tutorial!
Thank you so much dear sir for this video
Very helpful
🙏🏻
Thank you for your help, it’s easy and amazing
Fantastic, can now repair mine so easy
Thanks for this video 🙏
Thank you! I almost broke for real my Magic Bullet trying to change that item 😅
Merveilleux ! ! Merci 😊
Do you have the link for the parts?
I have MB 1001 model and need to replace the upper plate wheel that adjust the motor to the housing. Any idea where I can get it online? Thanks.
You're a man of few words!! LOL
For anyone who tries this….
Safety first. Unplug the machine before changing any parts. 😮
I'm missing one of the circles at the bottom that holds the base stable. I've looked all over the internet but couldn't find any piece. Any idea on where i can find those?
Thank you so much
Nice thank you
Question about one of the blade peace. Does it have a metal washer between the rubber peace and the golden part attached to the blade peace? Mine has a washer and it seems very wore out. Should I replace it too. Thanks!
yes I would replace it. it is probably a spacer to make sure you get good contact with the base.
@@diyhomeimprovement9298 thank you so much :)
Reminder to unplug it from the power outlet before working on anything!
The unit with the blade. That gear seems to be mineralized to the shaft. Basically the inside of the screw is minerlized so I can't remove the black runbber gear. Should I ty soaking it in vinegar? KI don't want ot spray WD 40 on it because it's near food. Thanks!
Sorry I did not see your comment sooner I do not come on here very often. Yes you can soak it and vinegar it will help dissolve those minerals and you can wiggle it back and forth to help loosen it up good luck
Where did you buy those parts? On Amazon they sell those separately...thank you
yes I got the on Amazon. they came in a three pack. Everything is hard to find these days.
Awesome!
You Da man!
You ever sharpen the blades?
Im from India ,no one is repairing this center part from where can i order.Middle gear is jammed😢
THNKS BRO
how to order transparen gear 6mm dia. inside for magic bullet juicer
I got mine on amazon. It is hard to find parts now so look around.
Sorry I just saw your comment hope its not too late. I ordered them through amazon. Some people are having a hard time findings parts now . good luck!
I buyed on ebay
Where can you buy the replacement part?
I found them on Amazon
Nice! Where did you get the parts?
I got them on Amazon
Sorry unable to do the way shown by you, the plastic part in blender just doesn’t more and also the grove on screw has worn off unable to hold a screw driver any more.. any other method possible ? Please help…. Thanks
First make sure you are turning it the right way. It is the opposite of normal, "turn to the right to remove not the left. If you already did that you will have to take the bottom off. Turn it upside down, pull the little rubber feet out there are screws hidden behind them. remove the bottom and try again. might have to use channel locks to hold it. good luck!
@@diyhomeimprovement9298 this is the reply I needed. 👏
Tq 🎉
Personally I would have unplugged the bullet as a precaution before changing the gears.
Unplug. Good Job. Brief
Please unplug all electrical appliances before changing parts.
Nice voice
I don't know if anyone else has same issue but with mine it turns on straight away without putting anything on as soon as I plug it in its like the pressure plates are broken on it anyone know how to fix this?
Sounds like you will have to disassemble your Magic Bullet. Do the white bars spring back or are they stuck down? Clue two of them will click when you depress them to switch on the motor the switches might be broke. You will have to completely disassemble and replace the if you can find them might be better off just buying a new one.
wow that was easy
Grazie
Good video, but this part broken in half and the gold part stay in the base, how can I out this???? Sorry my english is not good
You will have to use a pair of pliers or channel locks to hold on to that gold peace. Good luck
@@diyhomeimprovement9298 🙄🙄thanks
👍👍👍👍👍👍👍
Had my 1st Magic Bullet for years. Just got a new one.. One 3rd run, the plastic gear shattered. I bought the new parts which arrived today....HOWEVER, I just noticed the new MB doesn;t have the opening at the base to access the screw. Sigh.
Me too! I’m looking at the base of mine and it doesn’t have an opening to do this!!!!😢
Look for my other comment here if you still have it!
😊красава меньше слов брльше дела
Kewl. But unplug the device first.
Disconnect it before!!
UNPLUG IT FIRST! I hope you don't own a gun, my friend.
I have had mine for nearly 15 years now and have changed the gear and rubber parts a few times. Today though I realised:
1. the little rubber feet come out and are hiding screws which makes it much easier (or even possible if the screw has blown out or if yours doesn't have the slot) to remove the cog - use a well folded tea towel to hold the flywheel in the bottom of the unit and pliers or locking pliers on the plastic cog. If it doesn't seems to budge, try going the other way :D
and
2. These things are some of the best made appliances of all time. I have been saying I'd buy another one in a heartbeat if mine broke for at least ten years now and it looks like its still got plenty of life left in it now. Magic Bullets rule!!
Do you have the link for the parts?
I got them on Amazon you can just put Magic Bullet base gear and it should come up.....
this link should get you there thanks....
www.amazon.com/Magic-Bullet-Blender-MB1001-Replacement/dp/B07CGKK21J/ref=mp_s_a_1_3?crid=NTU4C1CJKVW6&keywords=magic+bullet+base+gear+replacement&qid=1680134681&sprefix=Magic+Bullet+replacement+gear%2Caps%2C595&sr=8-3