I'm 61 years old always been scared of welding but I want to learn how to now not just because of this video. But that is really bad ass love it you have talent.
It’s ok decent design i don’t like a few things but it works. At least this kid is doing something besides playing with his phone so that’s a plus right there 👍🏻👍🏻
If you do not make this safer, you are going to be injured in a crash instead of walking away. Imagine being doused and lit with petrol or impaled on your steering. Easy fixes that make a difference... and always wear a helmet. Cool build, thanks for the video!
did you reuse the same ktm motoryicle parts in all projects ? After done these cars you made, did you sell them ? Great projects, but i concerned about the rear axle. that little pivots are not enough to secure in place properly. you have to add some solderted ring in there.
Add some body panels and a windshield, do some exhaust work to keep it inside and not sticking out the side (unless it was dual on both sides) and it would be perfection! THIS IS AWESOME!
I like watching your builds, and it's awesome that you only use a stick welder.........but you really need to get a ratchet set instead of only using wrenches to put on the nuts and bolts. You should check out some of the projects that Rather B Welding does on his TH-cam channel.
That's awesome buddy, but you might want to put the exhaust inside the frame so if you bump anything it won't matter because it's out of the way, great build 👍🏼
You did a great job sir, I like it when you have a lot of driving scenes, please drive. This is all very interesting but this gives me an idea of how to build your work right now. Please continue to uphold
I'd definitely 3after 1 if it came in kit form so I'd have something to do with the kids to stop them going outside the front garden too much as a some of the kids pick on them all the time
كان بإمكانك وضع كراسى الرولمان بلى للمحور الخلفى من أسفل وكذلك قواعد رباط مقصات التعليق الأمامى من أسفل لرفع جسم السياره أكثر من ذلك وسيعطيك هذا مساحه لتعليق ماسورة العادم من أسفل الشاسيه وليس من جانبه .. لكنك مشكور على الڤيديوا وأعمالك رائعه وبسيطه وواضحه جدا
Amigo soy Tito desde Perú Chiclayo, te recomiendo no debes filmar demasiado la soldadura, afecta la visión y así como yo que evitamos ver tus videos por este error, son muchos los que evitan tus videos, corrige eso por favor para poder ver tu información, gracias
c'est bien seulement il ne donne aucune explication concernant les pièces utilisées et les dimensions des diverses ^pièces du châssis en fait cela veut dire que si moi je désire me fabriquer un engin similaire ce ne sera pas possible dons c'est nul....................
It's called an arc welder, stick welder. The flux to prevent oxidized welds that are porous and weak surround the electrode. In the right hands they are the best there is.
Should have made it sit higher off the ground too that cart is way to low for off-road. If he changes the tires put racing slicks he can make a street cart. The height he made is good for that.
Terima kasih telah menonton video saya dan memberikan komentar yang positif! Saya senang mendengar bahwa Anda menyukai proyek saya. Jika Anda memiliki saran untuk proyek atau perbaikan di masa depan, jangan ragu untuk memberitahu saya. Terima kasih atas dukungan Anda!
He could have took some of that flat steel he had and made leaf springs for the back axle too not that hard. But this kid is still new to making stuff I guess. It’s ok for a simple design but I was building carts like this when I was 10
COOL... Que du frein avant c'est chaux je connais pas la puissance du moteur faut pas qu'il pleuve s'en garde boue sur les Roue et maître le moteur et le réservoir au milieu répartie mieux les Masse 👍
Do you have safety glass on that road that's dangerous with out them but it's OK you look cool but not really to smart I'm afraid, Sorry about the comments but it's for my Owen good to say something but the work you did is absolutely just marvelous if l may say
Thank you for watching my video and for your feedback. I appreciate your concern for my safety and I agree that safety should always be a top priority when working on any project, especially vehicles. In this particular project, I made sure to wear appropriate safety gear and take necessary precautions while testing the vehicle. Thank you for your kind words about my work, and please feel free to reach out if you have any further questions or concerns.
an hour and 15 minutes?... Pfft!! could'a had it done in 52 if he wouldn'ta stood around camerain it the whole time.... 😆 Nice Job! What did the front suspension come off of? I dig them drum breaks!
Então tá muito bacana mas mais você tem que colocar uma capota para não molhar quando está chovendo faz uma embolada aí coloca uma capota para não molhar beleza Chicó e Duartina interior de São Paulo Brasil
Thank you for your feedback! I appreciate your observation about the bolts used in my project. I will certainly take your suggestion into consideration and make any necessary changes in future projects. Safety and quality are very important to me, and I'm always looking for ways to improve my work. Thank you again for watching my video and for taking the time to share your thoughts.
I'm 61 years old always been scared of welding but I want to learn how to now not just because of this video. But that is really bad ass love it you have talent.
Yes sir welding is fun learn on stick it’s never too late just get a used 230 can find em cheap can weld anything with one of those
Приятно видеть талантливого человека , поэтому наверное и решил тоже картинг дома заделать .
It’s ok decent design i don’t like a few things but it works. At least this kid is doing something besides playing with his phone so that’s a plus right there 👍🏻👍🏻
What would you change.
You've done a fabulous job there sir, this gives me ideas on how to build mine now.
i build karts as well. this level of craftsmanship and work from one man is incredible. bravo and keep making these awesome vids!
If you do not make this safer, you are going to be injured in a crash instead of walking away. Imagine being doused and lit with petrol or impaled on your steering. Easy fixes that make a difference... and always wear a helmet.
Cool build, thanks for the video!
did you reuse the same ktm motoryicle parts in all projects ? After done these cars you made, did you sell them ? Great projects, but i concerned about the rear axle. that little pivots are not enough to secure in place properly. you have to add some solderted ring in there.
Builds doing what "feels right" rather than following a stringent plan are always the best.
Yoooh wow you helped me build my own go cart thanks bro❤😂
i like when you have good amount of footage driving them please do more driving on other builds keep it up
Add some body panels and a windshield, do some exhaust work to keep it inside and not sticking out the side (unless it was dual on both sides) and it would be perfection! THIS IS AWESOME!
How much money ofthiscar 😅
Very cool! You should check out something called cycle karts . From what I've seen here, you would make some of the best. Good job man.
I like watching your builds, and it's awesome that you only use a stick welder.........but you really need to get a ratchet set instead of only using wrenches to put on the nuts and bolts. You should check out some of the projects that Rather B Welding does on his TH-cam channel.
That's awesome buddy, but you might want to put the exhaust inside the frame so if you bump anything it won't matter because it's out of the way, great build 👍🏼
I was going to mention the same thing.
Thought the same thing. If he doesn’t know how to just raise the engine….
good work, I want to make such a device, but I can't find the front chassis, please tell me where I can order it? Greetings from Ukraine!
You did a great job sir, I like it when you have a lot of driving scenes, please drive. This is all very interesting but this gives me an idea of how to build your work right now. Please continue to uphold
What welding rod is he using with that small welder. It seems to do a clean strong weld.
È uno dei veicoli più fantasmagorico del mondo il prossimo video lo voglio vederlo al McDrive
This man is creating his own car company. I would buy one of these if i could lol.
Sometimes, home made carts like this one are better than store bought ones.
Dont buy....made in crude manner... not safe..
I'd definitely 3after 1 if it came in kit form so I'd have something to do with the kids to stop them going outside the front garden too much as a some of the kids pick on them all the time
Cuáles són los planos
It’s pretty cool I’ll give him that. Motorcycle engine is good I built one with a YZ 490 when I was a kid
Great job ! 👍
Thank you! 👍
@@CHERALAUTO You're welcome !
maravilhoso; parabens, show de bola
That’s some creative engineering 👍🏾👍🏾😎
Thanks 👍
We didn’t have rack and pinion steering back then either
BRAVO ET BONNE CONTINUATION❣❣
Yah man from Jamaica it bad mi love it... question do you have a cutting list or a plan for sale?
كان بإمكانك وضع كراسى الرولمان بلى للمحور الخلفى من أسفل وكذلك قواعد رباط مقصات التعليق الأمامى من أسفل لرفع جسم السياره أكثر من ذلك وسيعطيك هذا مساحه لتعليق ماسورة العادم من أسفل الشاسيه وليس من جانبه ..
لكنك مشكور على الڤيديوا وأعمالك رائعه وبسيطه وواضحه جدا
I love the way you make stuffs
Um maravilhoso e abençoado final de Semana pra todos nós com a Santa Paz de Deus
Good job ❤❤
Bro which engine really suitable for gokart bike or car engine??
Quick question where do you get all the parts for these projects?
Вот самое лучшее видео по постройке этого чуда ) все ясно и понятно в целом даже без слов)
Amigo nao sou Nenhum especialista na Area mas... acho que a parte de tras faltou Suspensao. Otimo video kart brabo
Qué bonito camino por el que conduce. ¿En qué país se encuentra?
very good friend congratulations for the work.
Congratulations! The vehicle was amazing!
Do you have the project in PDF? Can send me?
Thanks!
reverse gear ?
Awesome 💯😎
What was the name of the part you used to connect the wheel to the body?
Nice to see people do thing by iteself. Great achivement my friend. BRAVO, He as nuts :p
Good progress project good luck
Thank you, George! We appreciate your support.
Los plano@@CHERALAUTO
Отличная идея👍
Essas balanças q tu usa é de que?
it amazing but i want the blue prints but can't find them
"Bro, from which quad bike did you take the parts? What engine do you have, and where can I find the blueprints?
Thanks."
What type of engine did you use there
ever heard of material savings and occupatioal safety ?
You always mount the engine on a plate so it can be adjusted for chain tension not hard bolted to frame
Bro you to add some suspensions on the back or you can put just one tyre on the back like a trike🥲
No reverse what is that?
Ficou show....
Gostaria de construir um parecendo
Nice work, but I wish u would have aligned the exhaust with the body, put it on a different location.
🥴
Nice build!! Top speed?!?
Amigo soy Tito desde Perú Chiclayo, te recomiendo no debes filmar demasiado la soldadura, afecta la visión y así como yo que evitamos ver tus videos por este error, son muchos los que evitan tus videos, corrige eso por favor para poder ver tu información, gracias
Tudo isso é muito bacana, mais falta um tutorial com as medidas e peças usadas, mais ficou top dos top
Where can I buy the blueprints to this
c'est bien seulement il ne donne aucune explication concernant les pièces utilisées et les dimensions des diverses ^pièces du châssis en fait cela veut dire que si moi je désire me fabriquer un engin similaire ce ne sera pas possible dons c'est nul....................
Bonjour,j'aime bien la vidéo mais j'aimerai bien avoir le plan avec dimensions pour construire une pour mon fils.
What kind of welder is that
It's called an arc welder, stick welder. The flux to prevent oxidized welds that are porous and weak surround the electrode. In the right hands they are the best there is.
Good job.. 👍👍👍👍
Please which type of front hub is this
Where did you buy Pat's sir
How many days to make this go kart car.
in how many days will you finish
Мне так панравелась твая гонка зделай и мне такую я несмагу сам зделать кстати а шо за матор там у тебя на гонке? Ти харош вапше респект тибе🥳👍
How about going back? You have to get off and push back
Apakah setelah pengerjaan Go-kart nya selesai itu akan di jual 😊😊😊
Good project 👍 👌
Should have made it sit higher off the ground too that cart is way to low for off-road. If he changes the tires put racing slicks he can make a street cart. The height he made is good for that.
Qual é o tamanho dele quais são os matá-los que você usou
Mantap kawan 👍
Terima kasih telah menonton video saya dan memberikan komentar yang positif! Saya senang mendengar bahwa Anda menyukai proyek saya. Jika Anda memiliki saran untuk proyek atau perbaikan di masa depan, jangan ragu untuk memberitahu saya. Terima kasih atas dukungan Anda!
@@CHERALAUTO saya menyukai proses pembuatan nya bos 👍
I love all your builds until the point you use the brake levers for foot pedals!
Nice😍😍😍😍
Top top queria um desse😅
Hi ,May I know the size, length and width?
He could have took some of that flat steel he had and made leaf springs for the back axle too not that hard. But this kid is still new to making stuff I guess. It’s ok for a simple design but I was building carts like this when I was 10
Класс. . Сделай мини копию любого супер гипер. кара .
COOL...
Que du frein avant c'est chaux je connais pas la puissance du moteur faut pas qu'il pleuve s'en garde boue sur les Roue et maître le moteur et le réservoir au milieu répartie mieux les Masse 👍
Bro plz make monster truck 👍🙏🏽🙏🏽❤️
Que tipo de tubo le puso?
Формула нервно курит в сторонке
if you havnt started to watch this video i advise changing speed setting to #2
Super creative and so hard creative
It is good bro, i w to learn
Chế xe thì không khó
Chỗ tôi chế ra xe
THì cũng không đi ra đường dc
Csgt bắt tịch thu xe ngay !!
good job 👍👍
Envíos a 🇻🇪 Venezuela
que motor trae?
Mad Max!
Do you have safety glass on that road that's dangerous with out them but it's OK you look cool but not really to smart I'm afraid, Sorry about the comments but it's for my Owen good to say something but the work you did is absolutely just marvelous if l may say
Thank you for watching my video and for your feedback. I appreciate your concern for my safety and I agree that safety should always be a top priority when working on any project, especially vehicles. In this particular project, I made sure to wear appropriate safety gear and take necessary precautions while testing the vehicle. Thank you for your kind words about my work, and please feel free to reach out if you have any further questions or concerns.
@@CHERALAUTO "Bro, from which quad bike did you take the parts? What engine do you have, and where can I find the blueprints?
Thanks."
Keren luarbiasa
an hour and 15 minutes?... Pfft!! could'a had it done in 52 if he wouldn'ta stood around camerain it the whole time.... 😆
Nice Job! What did the front suspension come off of? I dig them drum breaks!
Pretty sure you mean filming.. never heard of camerain before
Круто, это что сверлиш самарезами по металу
Very expensive?
then the rear axle should be under the frame
A la tu trabajo está de 100! Esos proyectos los vendes? Quisiera adquirir uno
Então tá muito bacana mas mais você tem que colocar uma capota para não molhar quando está chovendo faz uma embolada aí coloca uma capota para não molhar beleza Chicó e Duartina interior de São Paulo Brasil
I think you need longer bolts
Thank you for your feedback! I appreciate your observation about the bolts used in my project. I will certainly take your suggestion into consideration and make any necessary changes in future projects. Safety and quality are very important to me, and I'm always looking for ways to improve my work. Thank you again for watching my video and for taking the time to share your thoughts.
@@CHERALAUTO "Bro, from which quad bike did you take the parts? What engine do you have, and where can I find the blueprints?
Thanks."
YOU DID AMAZING can you make me ONE AND SHIP it to me