How to Mod Upgrade Arcade1up | DIY Arcade $200 - Play The Best Retro Games of All Time!
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- Want to play the best retro arcade games of all time for under $200? In this DIY arcade tutorial I show you how to mod upgrade your Arcade1up. Play the best arcade games of all time like Donkey Kong, Ms. Pac Man, Galaga, Space Invaders, Frogger, Dig Dug and of course Pac Man!!
Need Parts for your Arcade1Up 5 Step Mod?
Check out my other video: "Arcade1up Pac Man Mod | DIY Arcade Parts Checklist"
• Arcade1up Pac Man Mod ...
Parts Used in This Arcade Mod:
Arcade1up Pac Man Cabaret Cabinet
Suzo HAPP Joystick
Suzo HAPP Buttons
Cherry Switches
Arcade 60-1 PCB Board (iCade)
JAMMA Harness
JAMMA Power Supply
LCD Controller Board
LCD Controller Board Converter Cable
VGA Cable
Gorilla Double Sided Sticky Tape
(4) 3/4 Inch Wood Screws
Arcade1up
Initially, the company sought licenses for the early 1970s and 1980s arcade games from Namco, Midway, and Atari, then later added games from the 1990s and beyond. Most systems ship with between two and twelve games from the same family or genre of games that shared the same control set; for example, their Pac-Man cabinet includes Pac-Man Plus, while Centipede includes three other Atari games that used trackball controls, Millipede, Missile Command, and Crystal Castles. The control panels are modeled based on the original games. For multiplayer fighting and brawler games that support more than two players, such as the four-player Teenage Mutant Ninja Turtles, the smaller scale of the cabinet had initially created problems with players crowding around the controls. Arcade1Up created special full-size controller decks to give enough room for each player to have space at the cabinet. Where possible, Arcade1Up has added remote multiplayer functionality via Wi-Fi connections.
The company has since branched to other product offerings. It offers smaller sized "counter-cades" that can be set on a bar or table, typically which ship with a single game. It also offers sit-down table cabinets for head-to-head games.
In June 2020, Arcade1Up in partnership with Zen Studios announced the first in its line of 3/4th-scale replica pinball machines, using Zen Studios' pinball video game software played out on a monitor. Zen Studios, which had already acquired licenses to develop pinball tables based on Marvel and Star Wars properties, provided these tables for Arcade1Up's hardware. The company also acquired the license for replica light gun games, starting with Big Buck Hunter. They released their first sit-down style cabinet including steering wheel controls in November 2020 for the game Outrun.
The continued rising interest in retro gaming helped Arcade1Up to strong sales, and by May 2020 they had sold their one millionth unit. They also saw a large surge in sales at the COVID-19 pandemic started in March 2020, forcing many people to be quarantined at home and turning to video games as a pastime. From March to May 2020, sales had grown on average of 96% week-over-week.
Thanks for Watching!
Remember The Game Is NEVER Over!!
Its Just The Beginning...
Stay Connected
Xbox Live: DKOG3
Facebook: Dkog SevenThree
TH-camr Shout Out: ETA Prime
/ etaprime
#Arcade1up Mod, #PacMan, #DKOG73 - เกม
![[TH] 2024 PMWC x EWC Main Tournament Day 1 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/f5Coja1zCzo/mqdefault.jpg)
1 Of The best tutorials I've ever seen, I Just Bought a Legacy Edition & Looking Forward To Modding It. Liked & Subscribed. Cheers From Scotland
Thank You!! If you have any questions let me know!!
I installed one of these 60-in-1 boards, into a Arcade1Up Space Invaders cab that I had picked up cheap. It works great. The nice thing is that you can configure the 60-in-1 to only show the games you want. So I have mine only displaying 18 (of my favorite) games.
That Space Invaders cab is a beauty!! Great for the 60 and 1 👍🏻 Thanks 🙏 for stopping by.
Awesome job!! Me and my grandson are about to upgrade our Galaga unit and this answered a ton of questions. Watched a bunch of videos and this one was the best. Thank you!
Thanks 🙏- I wanted to create a video that simplified the process!! Let me know how it goes - if you need any help let me know!! Have fun on the mod!!
Hey! Just wanted to stop by to say thank you!
I just completed my mod and your videos were a huge help!
Thanks Mike!! Always feels great to complete a mod - hit the power - and bam it works!!!
Thanks for the tutorial! Just got my 60 in 1 installed. Had an issue with the arcade 1up screen so i de-cased a dell monitor ( thanks to Bobby Vu how to) and it works great. I love this board. Took my pac man with 2 games to 60! Awesome!
That’s awesome 😎✊!! Bobby Vu is a great guy! Thanks for stopping - Glad your mod went well!!
Thanks for the shoutout! Keep up the amazing work with your channel, consistency is the key to success!
Great tutorial, thanks! I’m about to embark on this mod journey so this has been incredible helpful.
Thanks for stopping by. That’s awesome 😎✊ - The 60 and 1 is a great OG arcade board!! If you need anything lmk 👍🏻
I added one of these 60-in-1 cards to my Arcade1Up Space Invaders cab. Works great!
Thanks for hangin and and watching the vid!! That’s Awesome! What’s your fav game on 60/1?
@@DKOG73 I have it setup to only display 18 games. Donkey Kong, Frogger, Pac Man, and Galaxian are my favorites.
@@gameofyou1 Those are some great games bro!! Thanks for stopping by ✊
Very entertaining and fun to watch. Thanks for posting this.
Finally got the audio working. Everything tested fine. Found another 3.5 audio cable swapped it out and now it’s working. Must have been the cable. Thanks for all your help!
That’s AWESOME ✊ Enjoy 👍🏻
Thorough and detailed, love it!
Thanks as always Mr. Jaye Chang!! I heard you have a TH-cam channel?? Is that true?? BYW one day we will tell the story together about the night we picked up the 4K!!
I bought one of those 60 in 1 boards a couple years back with a harness and power supply, this video made me wanna do a build around it
That’s awesome!! Are you going to use an Arcade1up cabinet?
@@DKOG73 No I have a little lcd screen i salvaged from a portable DVD player, I bought the display board for the specific screen model and I've been wanting to use it for a little wall mount build or something.
One of my CNC machines can cut out 4x4 sheets so I've been designing and making arcade pedestals and some table top cabs, would be cool to design an easy wall mount thing, maybe a cocktail, lol
@@redherring5532 That’s cool are you going enclose or just use a control panel. Lots of cool ways you can do it.
@@redherring5532 that cool!!! When you finish it will send a link so we can see it?
Great video, next step, lighted marquee! And real coin door. Complete that baby!
You are 100% Correct!! Thanks for hangin out! Upgrade Coming Soon!! Picking up an iiRcade then I will go back and change out the kick plate with Coin Door then change out Control Panel with LED trackball and then a New LED Marquee!!
Epic video! Thank you for the shoutout!!!
You are amazingly talented with tech and have built so many awesome arcades for us and others. Great video ❤️
Thankful for you!!
Pretty cool man! Thanks for the video!
Thanks for hangin out!!
You just earned a sub! Thank you so very much for the information.
Thank You 👊 Appreciate the support
Nice job, great info!
Thanks 🙏!! Appreciate the support!!!
I’ve seen the Raspberry Pi conversions, but I like the idea of a Jamma conversion better. It opens up so many cool possibilities…
Thanks for watching!! I might add the 412 / 1 Board and I think this might be cool 😎 Pandora’s Box has a Vertical Only JAMMA board with games like Donpachi. Maybe one day I will build another standup and make a JAMMA cabinet where I can change out the PCB boards.
@@DKOG73 use on/off switch to swap between 2 boards
Question, you mentioned you can use the existing power button and volume buttons on top. Is there a video on how to wire it?
Great vid overall. Purchased my parts to give it a try.
Great job thank you for sharing!
Thanks Bill!! Any new vids coming out?
@@DKOG73 Soon after I get Tron yes!
Love that shirt! I will have to check out some of these shout outs!
Thanks Bro - Just saw you on PDubs show talking about Trapper Keepers. Good stuff!!
Okay mate I think I have everything ordered, I ordered two different LCD boards though one had an extra ribbon cable and board with it.
Thanks to your tutorial I think next I’ll build a pre fab cabinet from scratch.
Awesome 👍🏻 Good luck with the build
What audio cable did you use from the new LCD board to the original unit audio male 3.5 adapter? I missed that in the video - thank you
Thank you I’m definitely going to attempt this with mine. Wish me luck..
Derek - Thanks for stopping by! Enjoy the cab. Lmk if you have any questions.
Great video. I'm having a hard time finding the correct 60-1 board because there are so many. Is the manufacturer “iCade”?
Nice mod man great work
Thank You ✊
fantastically well-made video! thx for sharing! i'm considering something similar for my 1up pac-man machine, but i would need to drill some holes for the additional buttons; mine only has two "player" buttons on the right side; no buttons on the left.
Thanks for stopping by 👊 Appreciate the kind words. The 60/1 board is an awesome easy to do mod. Good luck with your build if that’s the path you are gonna take 🕹️👍🏻
I modded this a few months ago and it works great, thanks so much for the vid! I was wondering if there’s a way to light up the marquee after modding it?
Glad the mod is working great 👍🏻 Thanks for stopping by. I would check eBay for the AC adaptor for the marquee. I’d your marquee isn’t back lit they do sell marquee kits on eBay as well. Hope that info helps.
just sub to you
happy new year and stay safe !
You Rock... Thank you again all fixed...
Very cool - glad you got it dialed in!
@@DKOG73 thanks to you yes... thanks brother... if you have any other mods you will be doing .. looking forward to it..
Wow, what a great video, so cool and very well described 👏👏👏
Enjoyed every second of the video. Thank you for creating and sharing this 👍🕹
Awesome video and modification! New to Arcade 1up and modding def sounds overwhelming, but this makes it seem straight forward. Would this work for a partycade 10-n-1 Mrs Pacman 40th anniversary edition?
What parts would I need to get differently?
Thanks Chris!! Yes - You just need to match up the right model lcd controller board with the Arcade1up monitor. Check your Arcade1up monitor model number and search for that in eBay or Amazon.
Thanks for the video! Everything went smoothly thanks to your tutorial. I do have an issue with getting audio to stock speakers. I purchased the speaker adapter cable as shown in the vid, but no audio. I can get sound straight from 60-in-1, but how are you getting audio to flow through the lcd controller with only vga? Thanks again!
Thanks for stopping by 👍🏻 Good question. Sound from the 60/1 needs to go out via a male to male 3.5 stereo cable from the 60/1 to the encoder. From there the sound goes a from the encoder to the speakers. Hope that helps! Glad your project is almost completed.
Using the powerstrip on/off as your on/off is clever.
Thanks for the sub!! Appreciate the Support!!
Great video. Question for you. On parts video you mention power supply with included 2 prong cord which I purchased. On the video it shows 3 wires for power supply. Do one of the prongs go on AC1 and other on FG (ground) or do both prongs go on AC1 and AC2. Where does 3rd wire come from. Thanks
You can use the ac cable they provided. I actually lost mine during the build and used an old pc power cord to go from the power strip to the Arcade power supply. Lots of vids on TH-cam on this. Hope that helps.
Question, I got my power supply and it came with a plug in with two prongs thingys, do I need to get anything else or do I just need to attach the prongs to the AV 1 and 2?
Great video, but i have a doubt !! Does the audio cable you said you picked up to connect the speakers come included with the kit?
I bought everything separately - here is a link to the audio cable $15
www.ebay.com/itm/Arcade1up-speaker-adapter-for-TMNT-Marvel-NBA-Jam-mod-w-LCD-controller-connector-/284485211332?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
So would the second set of wires go to a trackball or how would you ad a trackball and a joystick together? your video's are very help full// Thank you again ... please post if you fine away to hook up the on/off and volume
Jeff the 60/1 has second input that is designated for a tracball
Great video by the way tho
I just ordered a frogger cab on sale at Lowe's for $199 (sold out now). Gonna try this, hoping the process is pretty much the same 🤞
Thanks for stopping by 👍🏻 The process is pretty much the same. Just make sure the LCD encoder is compatible with your A1UP monitor model / part number.
Hey. Love the vids. Sooooo helpful. I’m starting to mod my cab. U we’re going to talk about the differences between the controller board. And didn’t. I think we have the same cab I just don’t know. Witch one to use. The 1280 x 960 or the 1280 x1024
Justin Thanks 🙏 for stopping by!! ✊Appreciate the support. I am using the 1280 x 960. What is the model number of your monitor?
I want to thank you for a great video. I connected everything like you said and everything is working fine. the only issue I have is, the screen is off to left a little about a 1/8 inch. went threw test mode and service mode, no setting for screen adjust. is it on the LCD control board?
The LED controller board has settings for for the picture. Have you tried those settings?
Update had to add an amp for the sound works perfect , only thing I don't like is when I click in it shows me preview on start up before the game will start, is their a way to turn it off,, ?
You can the previews off/ on in the config menu. Do a TH-cam search for “60 in 1 dip switch settings”
Do you have a detailed video of modifying a cocktail game table version of this?
No I don’t. The mod is basically the same. Thanks for stopping by 👍🏻
I can’t find a lcd control board with the model number with A-E00171102-G. Can someone help me find the right control board?
So do I have to change the buttons of the arcade in order to use the raspberry pie? Or can I still use the same arcade1up buttons that came with the arcade
Thanks for stopping by!! You can use the same buttons but will most likely have to do some soldering. There are a lot of good vids that go over that on TH-cam.
Thanks for the video, the only issue I’m having is the sound. I have the cable that plugs into the lcd converter, and changes to the 3.5 mm plug for the speakers. I ensured the volume is up on the lcd converter, and ensured the volume is enabled in the setup menu, and turned up. Any ideas? Thanks in advance.
You can test sound straight from 60/1 by plugging in some pc speakers. There is input and output for the sound on the controller board. You can test that your input from the 60/1 works by switching the input / output cables as well to make sure the the input cable is in the input slot. Hopefully that helps.
Thank you, thank you, thank you! I was hoping this was able to be done. I have the one up machine machine and always wanted more games. i just don't have the space for more cabinets. I've got to do this. One of favorites is the original Popeye. Does the mod include that one?
Unfortunately no Popeye on the 60/1.
Can't find anything on how to connect the on/off and sound switch. And the wifi. Can you point me in the right direction its a 60in 1 board. Ty
Jeff Thanks for stopping by 👍🏻 In this 60/1 build I did not connect power / sound to the A1UP control panel. The sound levels are managed in the encoder and I installed a belkin power strip on the bottom inside of the cabinet with the on / off switch which is connected to the Arcade power supply. This solution is
Not as elegant but it’s a much less complex to get the 60/1 up and running. Near the end of the vid I show how I did that. Wi-Fi isn’t used on the 60/1. I will look around and see if I can find a tutorial on setting up the sound and power via the control panel.
Great 👍
Thanks for stopping by 👍🏻
So if I am understanding this correctly this will work on most any 1up so long as you get the right lcd controller board.
Thanks for stopping by 👍🏻 Yeah once you have an LED encoder installed you can add a 60/1 / Raspberry Pi / PC / Pandoras Box. You can pick up joystick encoder boards on Amazon for under $20.
One last question, I have the pac man Legacy 12 in one what generation is that?
When you remove the back panel take a picture of the back of monitor. When buying LCD controller board match the lcd controller board to the monitor.
you can take the power strip switch and route the wires to the front panel switch and power the cab from there. Also you can remove the volume switch and replace with a small rotarty pot switch and feed the cables from the speaker to control volume. thanks for guide
Good points. Made the mod as simple as possible. Thanks for stopping by 👍🏻
How do you stop a game mid game just select a different game? Is it the same as arcade one up where you have to hold down the player one button for five seconds?
No you have to play the game out fully just like the arcade.
do you have to supply power to the lcd converter board? i am using the 60n1 controller.
Thanks for stopping by 👍🏻 Yes the lcd controller board needs power.
Hello. Everything works great with game play. The only problem I have is getting the pacman legacy marquee to get power. I told myself i was going to correct this and not bother you, but I've already purchased 2 things from amazon and none work. So I have a seperate power cable that ends with a male connector. And then you have the skinny male connector plug from the marquee. So I got a female to female 2.1mm plug. It fits in to the power adapter, but is too big for the male cord from the marquee. I cant seem to find a female to female plug thats 2.1mm on one side and maybe 1.7 or 1.3 on the other to fit the marquee cord. I don’t even know how to measure correctly, or if thats what I need. Can you tell me what you used?
Hey, I was wondering where you got the power supply cable and the audio cable for the driver board. great video thanks very much :)
Thanks for stopping by 👍🏻 Power Supply cable is same as Arcade1up. Both cables picked up from EBay
@@DKOG73 thanks very much :)
My mod is almost ready. Appreciate the help.
Great video, i am in the process doing this 60-1 mod on my Pac Legacy. This video saved me from drilling the extra Service and Test button. I am also keeping the built-in speaker. I completed all the buttons and joystick wiring. My question is can you use the built-in power switch in the Arcade1up or do we need do the manual power on and off from the power strip? Thanks and loved your detail video.
Yeah you can use the the power switch. I would check ETA Prime for installation vid
@DK0G73, i bought the audio adapter and followed your video and i am not getting any sounds. All the games worked without sound. Any advise would greatly appreciated! Thanks.
@@jonathancung4702 Plug some pc speakers directly into 60/1 to test sound. The sound flows from 60/1 to LED controller then to the speakers. Please check volume / mute settings on the controller board.
Great job.? 4 u do you know if this has super Mario brothers game on it.ive looked everywhere for it can't find it.tganks.
Thanks for stopping by 👍🏻 Unfortunately no Super Mario Bros on the 60/1.
This video along with the parts video are awesome!! If I had the Atari 50 A1Up game, could I do this with a 412 in 1 card instead? How would the track ball and spinner work with the Jamma loom? Would all of the other parts you suggested work (other than just changing out the 60 in 1 for the 412 in 1?
Thanks for stopping by 👍🏻 Yeah the 412 n 1 will work perfect with JAMMA. The 412 n 1 is compatible with a spinner and trackball - just checked. I am sure there are some good “how to” vids on TH-cam.
@@DKOG73 Thanks so much!! I will start searching! Do you know anyone who makes a modified deck for a Pac Man 3/4 with a trackball and spinner hole? Also, any feedback on LED buttons is totally appreciated too (does Tornado Terry have those or HAPP anywhere that you know of)? Really appreciate the reply - ready to try and make this work!
@@scottkutchins7510 Check here arcademodup.com/
would like to see the list of games on this Arcade 60-1 PCB Board (iCade)..Ty
Thanks for stopping by 👍🏻
1. Ms Pacman
2. Galaga
3. Frogger
4. Donkey Kong
5. Donkey Kong Junior
6. Donkey Kong 3
7. Galaxian
8. Dig Dug
9. Crush Roller
10. Mr. Do
11. Space Invaders
12. Pacman
13. Galaga3
14. Gyruss
15. Tank Battalion
16. Ladybug
17. Millipede
18. Burger Time
19. Pacman Jr.
20. Mappy
21. Pengo
22. 1942
23. Centipede
24. Phoenix
25. Time Pilot
26. Super Cobra
27. Hustler
28. Space Panic
29. Super Breakout
30. New Rally X
31. Arkanoid
32. Qix
33. Juno First
34. Xevious
35. Mr. Do’s Castle
36. Moon Cresta
37. Pinball Action
38. Scramble
39. Super Pacman
40. Bomb Jack
41. Shao-Lin’s Road
42. King & Ballon
43. 1943
44. Van-Van Car
45. Pac-Man Plus
46. Dig Dug 2
47. Amidar
48. Zaxxon
49. Pooyan
50. Pleiads
51. Gun Smoke
52. The End
53. 1943
54. Congo Bongo
55. Jumping Jack
56. Ms. Pac-Man (Fast Mode)
57. Pac-Man (Fast Mode)
58. Galaga (Rapid Fire Mode)
59. Pac-Man Jr. (Fast Mode)
60. Pac-Man Plus (Fast Mode)
Is there a way to adjust the volume with this mod? Awesome tutorial by the way! Thank you so much for doing this.
Thanks! The volume can be adjusted in the LED controller board.
Great videos can send a link on the audio converter cable you used? Thanks
Can you send the link on the Audio converter cable you used? Thanks
New to Arcade1Up and modding. Amazing video. Love how you kept is simple and detailed for us newbies. So helpful. Was wondering if you might be willing to provide current/active links to all of the products used? I have a new Pac-Man Legacy cab that I'd love to do this to. I found a few links within the comments, but unfortunately some of them are to products that are no longer active. Just don't want to make any mistake purchases. Thanks for any help you can provide.
Wild Fire Thank You for stopping by and hangin out!! Appreciate your support!! Super stoked for you to mod your cab. Some of the best games of all time!! One of the most important parts in the mod that is model specific is the LED controller board. You need to make sure you search Amazon for the led board that matches the Arcade1up monitor that you have. Posting was / is the challenge. Lol. I put links up that eventually break or for wrong monitor. I will send you some active links - is that cool?
@@DKOG73 Thanks a ton for the quick reply. Yes, that would be awesome. Donkey Kong and Donkey Kong Jr. were games I enjoyed with my dad as a kid. He owned a small convenience store that had two arcades that rotated out every few months. I'd go with him to work and spend the day (and a roll of quarters) playing whatever was there at the time, and those were always my two favorites. Can't wait to get to play them again. Specifically, I have the Pac-Man Legacy 12 in 1 with the riser and light up marquee (if that helps with the correct links). How will you be sending the links? If it is easier, feel free to post them here . Maybe they will help someone else who has the same machine.
@@wildfire4375
www.ebay.com/itm/60-In-1-Multicade-PCB-Board-CGA-VGA-Output-for-Classic-Jamma-Arcade-Video-Game-/393239499327?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
www.ebay.com/itm/REAL-HAPP-SEGA-14-BUTTON-JOYSTICK-SET-JAMMA-ARCADE-MAME-NAMCO-TEKKEN-FIGHT-STICK-/381351822346?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
www.ebay.com/itm/JAMMA-Mame-Cabinet-Wiring-Harness-Loom-Multicade-Arcade-Video-Game-PCB-cable-/332418279009?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
www.ebay.com/itm/16A-Arcade-Switching-Power-Supply-110-220V-5V-12V-Jamma-Multicade-8-Liner-US-/383523145043?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
www.ebay.com/itm/Arcade1up-speaker-adapter-for-TMNT-Marvel-NBA-Jam-mod-w-LCD-controller-connector-/284585485393?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
@@DKOG73 Man you are awesome. Thanks for doing that. I will probably try to get everything ordered over the weekend. I'll search for the LED controller board on Amazon like you mentioned. Will keep you posted on the build and let you know if I need any other parts links.
@@wildfire4375 Have fun and just take your time! Let me know how I can help!! Chat soon!!
Is there any way to add game to a big buck hunter and using the original guns ?
That’s a good question? Have you searched for a buck hunter mod on TH-cam?
Great video DKOG73! One question. I have the Pacman 12 game legacy with the illuminated header. How do I wire this header light? Thanks.
Ron Thanks 🙏 for stopping by!! Appreciate the support! ✊ - Great question - Here is the answer!! arcademodshop.com/products/arcade1up-marquee-power-adapter
@@DKOG73 fantastic thanks !!
Absolutely amazing step-by-step video Brother! Thank you. I missed the audio cable from the LCD to the audio the unit came with. What is that cable called? Please. Thanks again man!
Thanks for stopping by 👍🏻 I found it on eBay - search Arcade1up speaker adapter.
@@DKOG73 found it thank you! The other thing I did not get from the video is what was hooked up to the other(yellow) rectangular small board coming out of the controller board mounted to the back of the monitor? Were there any wires - harness- attached to it? thanks.
Hello. Thanks for making this video, for those of us who are less savvy. I will do this now thanks to your video. Do you know if it will work on the Pac-Man legacy BOE? I assume it will.
Thanks for stopping by 👍🏻 Yes it will work - You just need to make sure and use the right lcd encoder based on the model number of the Arcade1up monitor.
Awesome mod mate
Thanks for stopping by 👊
Do you have a video or instructions that show how to connect power to the LCD controller board?
You want to power up the lcd controller board with the Arcade1up power supply.
Thanks for the detailed mods. Question; can this also be done on cocktail tables? Sorry, new to the scene and picked up the MK2 table. I've googled, but not much info out there. Thanks
Yes you can use this vid to mod your cocktail table. The key is to make sure the A1UP monitor mode number is compatible with the lCD encoder board. The MK cocktail is a widescreen monitor so my advice would be to go with a Raspberry Pie mod. - ETA Prime has an awesome vid on that. Good luck on your mod 👊 Thanks for stopping by!!
Thank You for the reply, really appreciate it.
I love Jr Pacman wish Arcade 1up made a cabinet for it. It’s a Namco game so not sure why we haven’t seen it yet
It’s on the 60 and 1 board 👍🏻
Great video! Where do you plug in the marquee light? Thank you!
Sorry for the late reply bro!! Good Question!! There is a Y Adaptor Cable that you get on EBay / Amazon!! Going to look it up and post it here. Give me a few minutes.
www.ebay.com/itm/Arcade1up-Marquee-Power-Adapter-/284420286398?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
HOW DO YOU ADJUST THE SCREEN SIZE IF YOU WANTED TO PLAY SOMETHING LIKE THE SIMPSONS
PLZ HELP
If you want to play the Simpsons I would recommend a Raspberry Pie and a different Arcade1up cab like Street Fighter that has 6 buttons. ETA Prime has an awesome tutorial on that.
I have the street fight two joystick machine, what do you recommend for that?
Watch ETA primes Arcade1up RPie Mod video
I can’t find a lcd control board with the model number with A-E00171102-G. Can someone help me find the right controller board?
I see there are horizontal builds with 19 and up games . Will you do a horizontal build ?
Good Question!! In videos you can see my latest Arcade that I Built. I am going to do a video on that Arcade and how to put one together for about $1000. It plays everything! When I say everything I mean everything from 1977 to PlayStation 3.
Is there any reason you could not do this with Ms pac man? Just add extra buttons?
Thanks for stopping by 👍🏻 Yes the Ms Pac Man A1UP cab will work. Just make sure the monitor is compatible with the LCD encoder.
Where did you get the audio cable connection referenced at the 17:21 mark?
Thanks for stopping by 👍🏻 EBay
I’m planning to use the existing joystick and buttons. Will I be able to wire this up the same way you did or do I have to do something different? I have the Pac-Man legacy 12 in 1 cabinet
Brandon you can use the same controls - you will have to splice wires probably. You can pick up Sanwa clone joystick and buttons for super cheap on eBay. Like $25 and they will work way better IMO 👊 Thanks for stopping by.
@@DKOG73 Ok thanks!
I completed your tutorial and everything is working well except for audio. I'm not getting any audio using the setup you displayed, but when i plug the audio jack into the bottom of the pcb board (left of the vga output) there is audio-- though it's too quiet and I don't know how to change the volume level. Any suggestions?
Also wondering if there's an easy way to get the light-up marquee working again.
Thanks for your help and this video!
Thanks for stopping by 👍🏻 audio should flow from the 60/1 board via a male to male 3.5 stereo cable to the encoder “in” and then from the encoder “out” to the speakers. The encoder will control the volume. The backlit marquee will require a power supply which can be found on eBay / Amazon.
@@DKOG73 will do, thanks!
I recently bought a 40 anniversary PAC-MAN.
Any grades i can do. And can I add more games to it. Any link would be helpful and appreciated
The 60 and 1 board has 60 OG Arcade games. If you want to play more games then I would go with a Raspberry Pie 4 vertical mod. Lots of great tutorials on YT for that.
Have you thought of installing a crt into this arcade 1up cabinet?
First and foremost Thanks for supporting the channel!! There are a couple challenges with a CRT in a 1up. I think it’s possible but a lot of work would need to go into reinforcing of the cabinet from the inside. I don’t think the 1up is not strong enough to hold a CRT. The other challenge is that a 19 inch CRT might not even fit. I agree gaming on a CRT is awesome. Actually just put together a new Retro area with a 27 tv I picked up on OfferUp for $40 and it works awesome. Will showcase on my upcoming Game Room Tour video.
i have Arcade 1 up Ms Pacman cabinet. The control panel, right side has only has 2 buttons instead of 3 you showed in your video. Is that a problem? thanks.
Thanks for stopping by 👍🏻 90% of the games on the 60/1 board are only one button. You can always use a drill step bit and create a third button slot.
@@DKOG73 thanks!!!!
Love the video but need one for the cocktail table version from 1up
Thanks 👊 for stopping by
Can this be done with the Ms. PAC man /Galaga 81 cab?
Thanks for stopping by 👍🏻 Yes just make sure the lcd encoder is compatible with the Arcade1up monitor model number.
Does it keep highscores or do they reset when power turns off?
It will keep the score - just not the name.
awesome tutorial! I have one of these 60 in 1 boards as well. quick question, is there a way to keep initials saved as well? When I play galaga the high score saves, but every time I turn my arcade off and turn back on to play, initials go back to default. with my previous high scores any ideas? thank you.
Thanks for stopping by 👍🏻 Unfortunately the initials don’t save.
@@DKOG73 copy that, thank you for quick reply.
Awesome video. Got everything working except no audio… all turned on in menu. Any ideas?
Did you pick up the Arcade1up speaker adaptor?That plugs into the LED board. From the 60 and 1 the 3.5 mm audio out needs to go to the 3.5mm audio in on the LED board. Essentially the sound flows from the 60 and 1 to the LED Board and then to the speakers.
can I just install the new pcb for the games only and call it a day?
You don’t have to switch out the controls. It will take some soldering. However you will still need everything else.
:awesome: I want to do this to my arcade1up namco legacy. Question though, what arcade1up did you use to do this?
Pac Man Cabaret 3rd Gen.
Just bought my used pac man legacy cabinet. Will be purchasing the mod materials next. Do you have a video on how to hook up the lighted marquee? Is it find an adapter to connect direct to the power strip?
Thanks for making the videos!!! I can’t want to start the mod.
Thanks for stopping by 👍🏻 The best place Rob pick up the marquee adaptor would be either eBay or Amazon.
Starting mod tomorrow as parts begin to roll in, I have a question in advance….in normal operation mode post mod, what is the position all 4 dip switches needs to be in?
@@mattkeck6743Get that info to you in a bit.
Could I do this without switching the joy stick and buttons?
Yes will require some tricky wire management. Thanks for stopping by.
You should try the King Of Air 2 jamma board. 😉
That is 100% true!!! Will get the PCB and check it out. Thanks 🙏 Awesome idea!!
Do you have links on where to purchase all this?
Is this best for a single joystick setup? I love donkey kong, but dont think ive ever got scores like that playing as a teen..😎
Thanks for stopping by!! The 60/1 with JAMMA plays FLAWLESSLY - no lag!!!
Great video followed step by step and got the same results except I’m stuck on how to adjust volume? No sound but have everything hooked up with all the recommended parts. How do I adjust from LCD board or is it something else?
Did you pick up the Arcade1up speaker adaptor?That plugs into the LED board. From the 60 and 1 the 3.5 mm audio out needs to go to the 3.5mm audio in on the LED board. Essentially the sound flows from the 60 and 1 to the LED Board and then to the speakers.
Yes all hooked up
I think I might be missing one part. I got the speaker adapter with 4 pins that goes into the lcd controller and connects to Arcade 1 up speaker wire female to male But missing from 60-1 board to LCD? If so what is it?
Got it , thanks for your help and for a very good instruction video!
@@Super-bc1rv Super 8 - Yes I missed the 3.5mm male to male cable. Just watched the vid and Thank You for pointing that out I will make a vid and insert it into the video.
I was wondering.
To attach the wires to the power supply, do I need to solder? Or can I just screw them in like spade lugs?
Thanks for stopping by 👍🏻 You can screw them in.
@@DKOG73 Thanks
@@DKOG73Another question, will this work with the other multicade boards? (Game Never Over, Happy Hours, etc.)
@@CosmicToons You should be able to use other boards.
@@DKOG73 Aight thanks
If you have a lightup Marquee do you have to plug in the lights on please house?
You will need a marquee adapter and then plug it into the power strip.
Would you mind adding a link in the description for this? I’m new to all this and want to make sure I’m buying the right thing.
Hello. On this video, at approx the 13:00 minute mark, you show the retro arcade power supply cord with 3 ( U ) connectors attached. Aqua, white and black wires. But on the parts video which you did separately, when you show the power cord, it only has TWO ( U ) PRONGS. The video where you laid all the parts out on the table. I can only find a 2 pronged cord, not a 3. Will 2 work? Or can you tell me where to find the 3 prong like you show in this video?
The 2 prong cord will work. After making the parts video I misplaced the 2 prong cable 🤣
@@DKOG73 thanks again for making this video. I could never have attempted this in a million years without your help. Cheers!
@@ericvonbergen7223 👊 Glad you got it all working!!
Ok having a problem... I completed the conversion... I have no sound.. everything is connected.. I have the converter cord.. no sound.. please help
Ok here are the cables that are needed coming out of the 60 and 1. VGA Cable (only does video) a 3.5 male to male cable from 60 and 1 to the “incoming sound” port on the LED controller. Then the sound goes from the LED controller to the speakers via the conversion cable purchased on eBay. Is that how you have this setup?
No I don't have the one from the arcade 60 in one to the vsdisplay.. I found i can get sound of I plug in headphones too the 60 in one lol