YOU NEVER SEEN THESE 4 WIRE ROPE IDEAS BEFORE
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2020
- You have never seen these 4 ideas with wire rope
SUBSCRIBE-goo.gl/gYkBdJ
Other video!!!
Popular videos-goo.gl/KZCCXW
Awesome life hack -goo.gl/SCZiAr
3 Drill Machine Life Hacks You Should Know-goo.gl/7Ckdfh
How to make -goo.gl/g2Ph4P
Welcome to MR SUNY channel
Our channel include of guiding videos:
- Life hack
-DIY
-How to make
-Awesome ideas
-Tips
You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost! - วิทยาศาสตร์และเทคโนโลยี
As a retired stage rigger, I think it should be emphasized that these ideas are for decorative use and should NEVER be used in a "life safety critical" situation or where something might fall on someone.
Drilling a bolt seriously weakens it and welding on it would further weaken its temper and strength.
Welds on equipment that must be safe should be xrayed or magna-fluxed to check the bond of the weld, or load tested to at least 5 times the expected loadFor side ways loads, only forged eyebolts should be used with flange bases.
Agreed! These are super creative ideas. Should come with some sort of disclaimer, though. Relying on something like that trellis system to support any amount of load or force could cause serious injury or worse.
Pretty sure that is a given, although if you don't know welding you may not realise the welds are ... average, at best.
Good comment. I do not trust any untested trick such as this.
not sure what the cool idea's were but this guy is sure good at drilling a straight hole through a bolt.
😂😂😂yeaa
If I was counter drilling a bolt just held by the thread in the lathe it wouldn't be much more accurate!
i know Im asking randomly but does anyone know a trick to log back into an instagram account??
I was dumb forgot my account password. I appreciate any tips you can offer me!
@Marcel Sincere Instablaster =)
I really enjoyed the technique of jamming the rough cut frayed end through the small hole with camera cuts.
Muy buenisimas ideas,gracias mil.
Loved them. Especially #3
Keep them coming!
Absolutely you are right.before this video we don't know about your extraordinary knowledge.keep all in your mind.
Buenos trucos
Excellent congratulations
Muito obrigado
Thanks
Когда в мире коронавирус и нечем заняться дома 😁
You're right, I hadn't seen these until now, but I'm certainly keeping them in-mind now! I'll use real crimpers, though...
Great ideas . .
Thank you very much Sir
Super.... Good job 💐👏😂
GENIAL
Looks great. Hope it hold high tension. :) thanks
Good 👍👍👍👍👍
Amazing creativity. Superb 👍
Perfect 👍😍👌❤️💯🌹
Wow so amazing videos
THIS IS A BOLT ?? MAKE A SPIN ?? 🤣👍🏻
Awasome Brother
Harika ...
Top!
Good 👍👍👌👌
Thank!
I'm at 4:19 and I just realised I've probably seen at least 1 idea fully realised, and I couldn't tell you what it was supposed to be
Nice idea i like it too much,,i can make with my home,thanks for your idea bro
Hallo Bro!
Thanks
El cable no está bien sujeto ...dé nngun modo confiaria colgar algo
Доктор Дью оценил
Good
Nice
Great video
i need steel cable for something. let me secure it to drywall.
....it's concrete.
I don’t think you should be doing anything with a drill!
Zaberdust
Mega work
Show us wire rope ideas without the power tool please. Thanks.
These strike me as a good solution only if you have $45,000 worth of machining equipment, but not a $0.45 steel cable eyelet.
I came for the bolts... i stayed for the beats.
Only if making those length wise holes this easy
Good nice mr suny
Very good 👍
👍👍👍👍👍👍👍👍👍👍👍👍
This should be labeled, "What me drill holes through bolts."
Некоторые идеи далеко сомнительны...
круть!!!
아주좋아 정말좋아최고
Nice video! Direct like 👍
Go to all that effort using mild steel parts that will rust out near in the salt air instead of using 316 stainless steel.
You're wrong. IKEA had a product like this about 8-10 years ago. I have a couple of them in my house.
What brands of drill bits are you using ?
Mitsubishi
And absolutely never want to see them again.
Cable specialist are charging us a fortune 👍👍👌
Nice😀😀😀
Очень сильно круто 👍
Buenas ideas grasias
Да не мучайте вы тросик! Заплетите, сделайте красивую, прочную и главное быстро, петлю и цепляйте куда хочется. Нет, если хочется посверлить .... Чужое хочу, я уважаю. Спасибо.
All of this is easier using ferrules and turnbuckles.
Last one: just drill the hole smaller in that metal?!?
Bikin alat buat bending U aluminium
hey i need a simpler way to connect a cut wire than this on 4:08
crimping the end of the wire was the weakest part of the process. but as ideas go that was good
First two. Pointless. Why not loop through an eyelet if you have crimps then just tight eyelet down. Going away it will tighten and going down the wall it will wrap and tighten. Just drill a hole then put wire through the bolt, tighten bolt. Can even drill it through close to the head and tighten down with a nut. Doesn't even need a hole drilled
Pull tight, tighten nut then really tighten by screwing in the bolt. I would place a washer next to the bolt head. Loads of quicker better, easier ways, with none of the tools. nut crimp; it's ok but why not just splice the small easy stuff. If you saw this video you can watch one on splicing. Not sure what the last one even served a purpose for besides looks. This video shows you how to achieve something using more material, more tools, more time, and more effort to achieve one common goal. Good ideas in general just not good ways of doing them
👍
SUNIFICATION YOUR LIFE MY FRIENDS !! 😆👍🏻
Здраааасьте)
Hi Bro!
@@mrsunyofficial Доктор Дью ждёт Вас на "прием" с такими самоделками.(Ютюб).
Самоделки ни чем так как это 1трудоемкость,в магазине все эти крепления и растяжки есть
Зачем ты это снимаешь?🤦♂️🤣
Для доктора дию
01:09
06:25
03:19
these can be useful for clothes lines arthur linden
Я так и не понял нах это надо
А чтоб просмотры ему были и счастье! 😄
💋❤ Zürich Albisrieden dä rosche 😉🤠
Ого, сколько дерьмовых идей! Процветания Вашему каналу! 👍
дАрмовых?😃😃😉😉
@@Texno_Login нет-нет! Я не описАлся)
عينخبش ز
Hi
👍👍👍👍👍👏👏👏👏❤❤
Why so much work?
Easier to buy a talrem and a pair of cable clamps.
Cheaper and faster.
Boludez
dude, you're drilling into a ciment wall with an ordinairy spiral drill (that will be blunt after) in stead of a stone drill, poor example
These are really bad ways to terminate wire rope. None of them would pass any form of industrial inspection, and - as JP says - none of them should be trusted to hold any kind of load. It went wrong when he started to weld threaded rod to a nut, and just became nastier from there.
The
About the third one...just buy a gripple.
I had a feeling this was gonna be dumb and sketchy
You titel is wrong i have seen them before
Hi
Super video
No
Poor
time waist
This is not good idea man
what a bodger.
😂😂😂👎👎
Bad ideas
😂 Please, don’t waste your time with any of this nonsense!!
Ok Bro
Good
Nice