Mostly Printed CNC, Sticker Edition, MPCNC
ฝัง
- เผยแพร่เมื่อ 29 ต.ค. 2016
- This is the Mostly Printed CNC machine www.v1engineering.com/
cutting some vinyl stickers. Full write up here,
www.v1engineering.com/drag-kn...
Using the drag knife mount found here, www.thingiverse.com/thing:1860310
25.4mm stainless build @ about 2'x2' foot print. - วิทยาศาสตร์และเทคโนโลยี
How do you get Estlcam to only do one pass?? No matter what I do it conducts multiple passes. I've adjusted the depth per pass to be the same as the total depth, turned off finishing pass, etc.
Ryan: Please would like to know how to set up for vinyl cutting. I've assembled a MPCNC congratulations for your project.
Direct link in the description.
@@allted Many thanks for the feedback.
So it would seem that you'd use an engraving function to setup your toolpath for this?
What kind of vinyl would you recommend for stickers? Quite new to this process.
Yup, www.v1engineering.com/drag-knife-vinyl-cutter/
Neat, thanks - I may have to give this a try (once I check off a few of my other projects :-)
Its a good idea but Can you cut something printed(image) before and just cutting the border? thank you so much-
yes you can do that in the software!
How can a blade cut in all direction? When cutting by hand we need to get the sharp face facing the cutting direction and I don't see any Z axis on this MPCNC! Could you please clarify this point. Thanks
Drag knives have offset blades mounted with bearings and is self steering like a shopping cart wheel. If you have more questions please us the V1 forums.
does it need a special software to cut with drag knife, or is it the same with cnc or laser attachments
I used Estlcam and will put up instructions for that part hopefully tomorrow. All the pics and screen shots are ready so should be pretty quick. A laser program usually doesn't do Z moves so I don't think it would work. I could be wrong though.
Could this cut through .022in chipboard, to make custom boxes?
Not sure, I would imagine so but I have never tried anything that thick. This cutter is using a carbide blade so as long as you had a suitable surface to cut on I would think it could.
i was on vicious1, considering buying mpcnc bundle, i saw Printed Parts - 25.4mm -1" and 2 other options, what is the
difference ? and sry to ask here lol, don't know where to ask you this
It depends on what is available to you locally. It is explained on the specs page, the conduit assembly page, the printed parts pages in the shop, and in the FAQ's.
The forum is the best place to ask questions.
ok thanks!
hello ...can this work with any cnc router and how to configure the toolpath? how fast the speed of the machine to be done correctly? thanks
Yup, Link in the description with all the details.
@@allted ok I read all that ... I think I must try it with my cnc ... I have a big cnc router and use artcam !! do you think it can work ? also what is the best feed speed?
@@nacefsofiene4828 Yup, artcam works...just duckduckgo.com the phrase 'mpcnc artcam post processor'
Ahhh, that first piece of tape was working my last nerve!
you really dont need all that tape XD
Exactly what I was thinking while I was fighting with it. I honestly turned the volume up really loud to check if you could hear me cussing....