I built up my worn rubber dampers with strips of bicycle tube until the next service opportunity and shipping in replacements , now back to our video~~~~
@ the 10:37 mark you put some grease in the sprocket carrier. Did you clean out the existing grease before adding the new grease in there? Is it ok to mix greases?
![CAMPปลิ้น | EP.83[2/2] ประสบการณ์ขนหัวลุกจากตำนานวงการผี!](http://i.ytimg.com/vi/T_kFecQw7Ds/mqdefault.jpg)
I built up my worn rubber dampers with strips of bicycle tube until the next service opportunity and shipping in replacements , now back to our video~~~~
double check the balance mark opposite the tire stem , and rotation arrow before you inflate
This video help me a bunch!!! Thanks!!!
Aren't you supposed to balance it by spinning it on an axle and putting weights ?
@ the 10:37 mark you put some grease in the sprocket carrier. Did you clean out the existing grease before adding the new grease in there? Is it ok to mix greases?
Should be alright. If you want to get technical about it just wipe off the old grease with a paper towel.
Only concern when removing I have is the scratches it's hard to not scratch it that way.
Thank you
Welcome!
The tire is not mounted backwards.. look at 9:52 you can see clearly on the left side of the tire the rotation mark
The tread pattern is definitely wrong for a rear tyre, meaning he's more than likely mounted a front tyre onto the rear wheel.
That’s how it’s done
Is the tire backwards?
It is mounted backwards
No it's not check out 9:52 you can see the rotation arrow.
You put the tire on backwards
No it's not check out 9:52
Umm, yeah that was helpful, but that tyre is definitely facing the wrong way.
No it's not look at 9:52
How to correctly mount a tire backwards
It's not backwards look at 9:52