Hi CarlosJuan2012, I'll be releasing it at the ends of this week or over the weekend. I know it took quite sometime and all I hope is you all like it. My best regards.
Hello and thanks for your comment. Yes, I'll be addressing that in the video after the next one, since those are among external references and OLE's objects. Thanks a lot for your input and best regards.
it's been really helpful and i've even sugested ma frnds to check ur videos, and btw would u plz do a video of how to import image and trace it, as it is been in high demand now a days
I really appreciate your comments, it certainly motivates me to keep teaching Cad with people like you in mind. Next video will be out soon but all i hope for you is the best. Keep trying with AutoCad and remember to post any questions if you need some help. Thanks again and my best regards.
Hello. I had one questions about this specific tutorial. I just installed the 2013 but in this tutorial I cannot find the block samples like you have in the video. Do i need to have previous saved files where those blocks were created, because mine does not give me all the options you have, Thank you for these videos. I have not worked on autocad for 2 years and this has reallllly helped me.Thanks again and please keep making videos.You are a life saver !
Albulena Etemi Well everyone should have them in the design center. What type of CAD are you using, the regular 2013, the student version, a cracked one or a trial?. Try typing command "design center" and see if you have it. Then you will have to locate the block samples accordingly. Please let me know so I can help you more. Hope this will guide you.
I really appreciate your comments. The next one, 13 is about to go out, it includes adding the kitchen elements and introduction to Annotations. Regards
Hi, the solution for that is on the "Object snap" drawing aid. Please visit the video #4 called "Learning Autocad 2013: BASIC DRAWING AIDS" and let me know if that helps you. You have to specify what points it'll suggest. Regards
thanks for ur reply but as u said double check the measurements of the block. its measurement is 1524 x 915.03 am using metric on my drawing and am using scale on my drawing 1 : 1 thanks again for ur help
nicolas jr nikcool Ok, you have to compare it to what you have on the drawing. So for example if your drawing is a small part of 500 mm then the block you inserted is huge compared to that. So point is to determine if there is something wrong with the insertion scale from the Design Center or just that the block is bigger than what you have on screen.
Hi, How are u finding the middle of the object so quickly? eg. the bath tube , if i want to do it and draw a line in the centre of sth. the center point dissapears and makes my life harder, u seem to be finding it with ease. How do u get that yellow triangle? I dont have that. Another thing when i press an object it shows me like 100 points on it and u only get like center and 2 other. Last thing : the colour of my sink cabinet is not changing, only the rest of our furniture. Many thanks
hello, does .85 make the object/sink smaller? As if you were using 85% of the actual block size instead of 100% ? Were you eyeballing the size? Also, do you think CAD runs better in a MAC or PC? Thanks
Yes, 1=100%, any number less than 1 will shrink the block and of course bigger will increase the size as you are saying. As of now, both are pretty well and stable, but have in mind that Cad was designed for Windows platform, there are certain variations between the 2. I prefer using Cad in a PC but have no problems with Mac either. In the past it used to crash more often in Mac, but I haven't seen it in recent versions. Regards
thanks sir but the area for insertion is 3sq.m. and i think its from the insertion scale from design center. how do i fix it one thing also the design center window don't contain the usual right and left pane. Do you have any idea as to what cause this glitch. ManyThanks and nice weekend
nicolas jr nikcool Hello,Try sending me a screenshot of what it is. Besides what block are you trying to insert? what version of CAD are you using? You can drag and drop it in the model space, so I don't quite understand what you mean.
xharp dm You have them all along with the description in the design center. If you need to modify it then you specify what you need as we did with the bathtub. Let me know if this helps and regards.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
THANK YOU VERY MUCH FOR YOUR VIDEOS AND TEACHINGS, THEY ARE GREAT. IM WAITING FOR LESSON 13.
i just watch this on this year and this really helpfull! thank you! even i use the 2017 version but this is really help me to understand
Great to hear! Actually it is still applicable. All the best!
Got it. Didnt have the midpoint checked in Object snap settings :) so simple but yet cost me so much trouble. Thanks a lot :)
Hi CarlosJuan2012,
I'll be releasing it at the ends of this week or over the weekend. I know it took quite sometime and all I hope is you all like it.
My best regards.
Thanks a lot for your input and for watching.
My best regards.
Hi,
Thanks for asking, 13 is going to be released early next week and the others are on its way.
Best regards.
Great, feel free to ask when you get stuck and I'll do my best to reply as soon as possible.
Regards
Hello and thanks for your comment.
Yes, I'll be addressing that in the video after the next one, since those are among external references and OLE's objects. Thanks a lot for your input and best regards.
it's been really helpful and i've even sugested ma frnds to check ur videos, and btw would u plz do a video of how to import image and trace it, as it is been in high demand now a days
I really appreciate your comments, it certainly motivates me to keep teaching Cad with people like you in mind. Next video will be out soon but all i hope for you is the best. Keep trying with AutoCad and remember to post any questions if you need some help.
Thanks again and my best regards.
Hello. I had one questions about this specific tutorial. I just installed the 2013 but in this tutorial I cannot find the block samples like you have in the video. Do i need to have previous saved files where those blocks were created, because mine does not give me all the options you have, Thank you for these videos. I have not worked on autocad for 2 years and this has reallllly helped me.Thanks again and please keep making videos.You are a life saver !
Albulena Etemi Well everyone should have them in the design center. What type of CAD are you using, the regular 2013, the student version, a cracked one or a trial?. Try typing command "design center" and see if you have it. Then you will have to locate the block samples accordingly. Please let me know so I can help you more. Hope this will guide you.
Another helpful video. Have you used Autocad 2014 for Mac?
Hello,
For Mac yes, 2014, not yet. I'm planning to jump to 2015 as soon as it gets released.
My best regards
I really appreciate your comments. The next one, 13 is about to go out, it includes adding the kitchen elements and introduction to Annotations.
Regards
Hi, the solution for that is on the "Object snap" drawing aid. Please visit the video #4 called "Learning Autocad 2013: BASIC DRAWING AIDS" and let me know if that helps you. You have to specify what points it'll suggest.
Regards
thanks for ur reply but as u said double check the measurements of the block. its measurement is 1524 x 915.03 am using metric on my drawing and am using scale on my drawing 1 : 1 thanks again for ur help
nicolas jr nikcool Ok, you have to compare it to what you have on the drawing. So for example if your drawing is a small part of 500 mm then the block you inserted is huge compared to that. So point is to determine if there is something wrong with the insertion scale from the Design Center or just that the block is bigger than what you have on screen.
Hello everyone,
I hope you all enjoy the video and which you could share your thoughts. All comments are more than welcome.
Regards
Sure, if you need something specific, send me a pic to my email of what type of 3D wheel you need and I'll be glad to do it.
Regards
Hi,
How are u finding the middle of the object so quickly? eg. the bath tube , if i want to do it and draw a line in the centre of sth. the center point dissapears and makes my life harder, u seem to be finding it with ease. How do u get that yellow triangle? I dont have that. Another thing when i press an object it shows me like 100 points on it and u only get like center and 2 other. Last thing : the colour of my sink cabinet is not changing, only the rest of our furniture. Many thanks
hey easycad4you can u make us next time a video by making a 3D wheel or something? necesary 3D :D
hello, does .85 make the object/sink smaller? As if you were using 85% of the actual block size instead of 100% ? Were you eyeballing the size? Also, do you think CAD runs better in a MAC or PC? Thanks
Yes, 1=100%, any number less than 1 will shrink the block and of course bigger will increase the size as you are saying. As of now, both are pretty well and stable, but have in mind that Cad was designed for Windows platform, there are certain variations between the 2. I prefer using Cad in a PC but have no problems with Mac either. In the past it used to crash more often in Mac, but I haven't seen it in recent versions.
Regards
thanks sir but the area for insertion is 3sq.m. and i think its from the insertion scale from design center. how do i fix it
one thing also the design center window don't contain the usual right and left pane. Do you have any idea as to what cause this glitch. ManyThanks and nice weekend
nicolas jr nikcool Hello,Try sending me a screenshot of what it is. Besides what block are you trying to insert? what version of CAD are you using? You can drag and drop it in the model space, so I don't quite understand what you mean.
How can i change the view from front view to top view of the object that was taken from the design center?
Just click them and select the view you prefer, if it has the option you will be able to do it, unfortunately some don't have it.
how did you get the scale to appear on the paper layout page when it does not appear to be in the model space?
Lauren Alyse Kramer At what time in the video? Let me know please.
hi everybody i would like to know what cause my design center drawing block soo large when i tried to place it in my drawing. any help
nicolas jr nikcool Double check its measurements (the block) and compare it with the ones from your actual drawing. Post back to help you out.
It’s hard to see with the blue color of the furniture
ok i got the colour right so ferget about that part of my post
no measure for faucet,sink,bathtab blocks.
xharp dm You have them all along with the description in the design center. If you need to modify it then you specify what you need as we did with the bathtub. Let me know if this helps and regards.
how can i fiind your email ? :D
Is just easycad4you@gmail.com, send it there,
regards