Love the case! There are some high frequency based motion detection boards available too, although they won't look quite as cool with their very short antennas.
Superbe réalisation, félicitations pour tout le travail de design et d'intégration, en effet tu as du passer quelques nuits blanches. Tu devrais ouvrir une chaine Twitch et diffuser la construction ! C'est super intéressant de te voir à l’œuvre !
This needs a Relative Humidity sensor to indicate between 20 and 30 RH. This is the range when static electricity occurs naturally. Static electricity provides natural power for spirits to draw from. Knowing this is happening means the spirits don't have to drain batteries because they have a long-term power source. Can you add this?
Build me some gear and send it to me to test in the field I've been looking for someone that's been wanting to build stuff for us to test in real life conditions! Please message me anytime great work it's gotta be some of the best looking handmade equipment I've seen
U don’t need to use 2 arduinos to measure the temperature difference, you can do that with 1, and use variables in the code to check if temperature rises or falls…
I tried it for hours. Unfortunately my knowlege of programming are very limited and even when i made it work somewhat there where to many interferences that i decided to use two.
@@MancaveEffectsI’m a software engineer and I just got into electronics. I built some things on Tinkercad with temperature sensors and you have to create a global variable to store the initial temperature which you can get inside the setup() method. Then in the loop method (if you dont create a custom one) you can get the current temperature reading and compare it to the global variable you created. I think the commercial rem pods will alert to a temperature change if the temperature rises or falls +-5 degrees from the initial temperature. So in your code you could say something along the lines of: if (currentTemperature > initialTemperature + 5) {turn on LED or sound} and same thing for if the temperature drops: if (currentTemperature < initialTemperature - 5) {turn on LED or sound} If you hook up a button to the reset pin on the arduino you can hit that button and it will reset the temperature reading. Hopefully this helps!
They are usually not for sale however i do have a new model what is a Ghostradar scanner that scans a room continusely and displays it on a handheld reciever. Rasio range is a half mile and does also capture changes in temperature and humidity. For further informations contact me via email or Instagram.
Absolutely beautiful-I love what you’ve made!! You’re very talented…I’d buy yours over anything mass produced🌻☺️👍
A massive thank You for sharing this information! Personaly i love the steampunk touch too, it fit's perfect with the ghosthunting theme!
Thanks Vampi! I hope i inspired you to make your own! And don´t forget to put in holy water to keep away any evil spirits ;)
@@MancaveEffects I will! :-)
Love the case!
There are some high frequency based motion detection boards available too, although they won't look quite as cool with their very short antennas.
This is so cool!! I'm geeking out. 😅
You are very talented. Are you still making/selling stuff? I'd be interested in testing/buying some 🙂
Superbe réalisation, félicitations pour tout le travail de design et d'intégration, en effet tu as du passer quelques nuits blanches. Tu devrais ouvrir une chaine Twitch et diffuser la construction ! C'est super intéressant de te voir à l’œuvre !
This needs a Relative Humidity sensor to indicate between 20 and 30 RH. This is the range when static electricity occurs naturally. Static electricity provides natural power for spirits to draw from. Knowing this is happening means the spirits don't have to drain batteries because they have a long-term power source. Can you add this?
Build me some gear and send it to me to test in the field I've been looking for someone that's been wanting to build stuff for us to test in real life conditions! Please message me anytime great work it's gotta be some of the best looking handmade equipment I've seen
Very cool project!
i would buy this
How can I get one?
I need this
U don’t need to use 2 arduinos to measure the temperature difference, you can do that with 1, and use variables in the code to check if temperature rises or falls…
I tried it for hours. Unfortunately my knowlege of programming are very limited and even when i made it work somewhat there where to many interferences that i decided to use two.
@@MancaveEffectsI’m a software engineer and I just got into electronics. I built some things on Tinkercad with temperature sensors and you have to create a global variable to store the initial temperature which you can get inside the setup() method. Then in the loop method (if you dont create a custom one) you can get the current temperature reading and compare it to the global variable you created. I think the commercial rem pods will alert to a temperature change if the temperature rises or falls +-5 degrees from the initial temperature. So in your code you could say something along the lines of: if (currentTemperature > initialTemperature + 5) {turn on LED or sound} and same thing for if the temperature drops: if (currentTemperature < initialTemperature - 5) {turn on LED or sound}
If you hook up a button to the reset pin on the arduino you can hit that button and it will reset the temperature reading. Hopefully this helps!
@@2DAKE2 thanks for the input! I will get back to the project at one point 😎
Can you make it and sell it to us?
They are usually not for sale however i do have a new model what is a Ghostradar scanner that scans a room continusely and displays it on a handheld reciever. Rasio range is a half mile and does also capture changes in temperature and humidity. For further informations contact me via email or Instagram.
The looks are super unnecessary but those look sick as fuck. Looks like they came right out of ghostbusters!
Do u sell this device?
For now it is not for sale, however i am planing two new Ghostdetectors coming soon that will be build to sell.
𝓟Ř𝔬𝓂𝔬𝐒ϻ