Great video! This was the first mention I could find of the hazard button being the cause of the blinkers not working, but sure enough this was the fix. Thanks for saving me the mechanic bill!
Thanks for this. Dirty/Corroded innards of my hazard switch made my 1994 Accord Wagon have no turn signals... took the hazard switch apart, cleaned and back together. Of course I killed the "switcher" mechanism in my Hazards; they work but I have to hold it to keep it on! I'll get a new one soon, but at least the signals work! (Original Symptom: right and left turn signal didn't work and the flasher relay BUZZED really loudly. Like a 1960s VW horn. I replaced the flasher relay and the new one didn't work either and made a rapid clicky noise, twice as fast as a "hyper-flash" that LED bulbs will cause. Other symptom that the bad hazard switch will give is your turn signals will trigger even without a key in the ignition: hazards are always Hot Voltage but turn signals *should* require key.)
Solo7060-hopefully you get my question to your reply even though it has been more than 2 years ago-I was wondering what you did with your hazard switch?
Literally have the same thing happening to me, I usually just play with the hazards and my signals at the same time and they end up working again, but it's been an hour and I can't get them to work... and I don't feel comfortable driving without signals
Great video thanks for the tip. Little backstory, I had the same audible "buzzing" in the cab every time I tried to use the turn signals and or the hazards. Thought it was the turn signal relay but it turned out to be the hazard switch. Sixty some odd dollars later I have blinkers and hazards working but now no dash lights. The fuses appear ok, so I was wondering, any idea if there is anything more than the just that one "connector" I can't imagine that the replacement switch is the culprit, but I am thinking maybe it is. Anything other than tearing the dash apart to replace the bulbs that you can think of to check the before I go to that extreme? I saw another video and someone mentioned the "computer module, near the turn signal relay may have shorted out after replacing the switch, but I hope not.
i tried this and i did take the switch apart, cleaned it, and it sure did work for me ..
Great video! This was the first mention I could find of the hazard button being the cause of the blinkers not working, but sure enough this was the fix. Thanks for saving me the mechanic bill!
Thanks for this. Dirty/Corroded innards of my hazard switch made my 1994 Accord Wagon have no turn signals... took the hazard switch apart, cleaned and back together. Of course I killed the "switcher" mechanism in my Hazards; they work but I have to hold it to keep it on! I'll get a new one soon, but at least the signals work!
(Original Symptom: right and left turn signal didn't work and the flasher relay BUZZED really loudly. Like a 1960s VW horn. I replaced the flasher relay and the new one didn't work either and made a rapid clicky noise, twice as fast as a "hyper-flash" that LED bulbs will cause. Other symptom that the bad hazard switch will give is your turn signals will trigger even without a key in the ignition: hazards are always Hot Voltage but turn signals *should* require key.)
This helped me save so much money thank you!
Thanks for the vid
Paul B! Thank you sir! I didn't have the buzzing but the signal wouldn't work. I didn't even do everything u said. I just on the hazard button bam!!!
Solo7060-hopefully you get my question to your reply even though it has been more than 2 years ago-I was wondering what you did with your hazard switch?
@@marysgrace62 haha right?!
Literally have the same thing happening to me, I usually just play with the hazards and my signals at the same time and they end up working again, but it's been an hour and I can't get them to work... and I don't feel comfortable driving without signals
thanks alot mister..got the same issue with my honda jazz hope this solve my problem
Great video thanks for the tip. Little backstory, I had the same audible "buzzing" in the cab every time I tried to use the turn signals and or the hazards. Thought it was the turn signal relay but it turned out to be the hazard switch. Sixty some odd dollars later I have blinkers and hazards working but now no dash lights. The fuses appear ok, so I was wondering, any idea if there is anything more than the just that one "connector" I can't imagine that the replacement switch is the culprit, but I am thinking maybe it is. Anything other than tearing the dash apart to replace the bulbs that you can think of to check the before I go to that extreme? I saw another video and someone mentioned the "computer module, near the turn signal relay may have shorted out after replacing the switch, but I hope not.
Thanks for the help 02 rsx has blinkers again .
Can I call you
I need some more help please
Messenger me