Making the bolt cold can also work very well to crack the rust. Would have to let it sit for a few minutes afterward to allow the contraction to relax. Liquid nitrogen is the most powerful way to freeze metal, but usually not parctical. Dry ice works very wel, is cheap and easy to get. Also, there are a few brands of spray can metal freezer. They work pretty good and are very convient.
@dangerdavefreestyle I have heard of it working for people. Never used myself. Also, there's a product at your parts store called freeze off(or maybe freeze out, can't remember) that is bigger and probably colder. And has a type of penetrating fluid in it. Clean metal will transfer the cold very much better.
OH MY GOD I WAS DEALING WITH A RUSTY BOLT FOR HOURS THIS VIDEO TOTALLY WORKED, THANK YOU SO MUCH ❤️😭🔥 I can't believe it worked, thanks a thousand times ❤
TRUE MAPP gas is no longer available in North America {not since 2008). What is called MAPP here does not heat up anywhere near as much as the original MAPP.
600 crap my van leaked out so much steering fluid and the flare but won’t butch if I did that I will make my van catch on fire including my home since is inside the garage 😢😢😢😢😢😢 How about a heat gun putting through a pvc pipe since directly still send a spark while heating is also winter and the warmest is been 2d …I’m thinking nine stop for the last 5 days ….how the heck am I going to avoid sending my awesome van to the wreckyard 😢😢😢😢😢😢😢😢 I watched at least 200 videos and 3000 ways 😢😢😢😢I’m taking the insurance off today 😢😢😢😢I’ll miss my van 😭😭😭♥️
Really GOOD !! At APPLYING HEAT ! AROUND ANY ! FUEL TANK !! That said There is a another way without applying any Heat ! Whatsoever ! And No ! It's NOT ! WD 40 ! Or RP -7 ! USE !
One of Two Reasons , it would last WAY ! TOO LONG ! LIKE AMERICAN GENERAL MOTORS AND FORDS ! and Two ! Just ! Way TOO BAD ! FOR BUSINESSES ! TO OPERATE !
Penetrating Oils Compared Machinist's Workshop magazine actually tested penetrants for break out torque on rusted nuts. Significant results! *They arranged a subjective test of all the popular penetrants with the control being the torque required to remove the nut from a "scientifically rusted" environment.* *Penetrating oil ..... Average load* None ..................... 516 pounds WD-40 ............. 238 pounds PB Blaster ............. 214 pounds Liquid Wrench .. 127 pounds Kano Kroil ............ 106 pounds ATF-Acetone mix....53 pounds *The ATF-Acetone mix was a "home brew" mix of 50 - 50 automatic transmission fluid and acetone* *Note the "home brew" was better than any commercial product in this one particular test. A local machinist group mixed up a batch and all now use it with equally good results. Note also that "Liquid Wrench" is about as good as "Kroil" for about 20% of the price
Can't understand once lady talks,is she doing this on purpose so we men can't learn how to remove rusted bolts? Welp,thanks to TH-cam ,there are more better grammar and diction videos.
The lower bolt on my bearing mount of my truck is rusted as i could ever imagine. Ive tried filing it down and using different wrenches. But each time it just re-strips the bolt. I will have my uncle come over with a blow torch now. Because its been 5 hours fitting qith one bolt 😰
Love her. Finally an actual explanation of the technique required to remove a fucking exhaust bolt. Thank you.
My buddy thought I was watching porn when she was explaining the bolt expansion
Wtf
Ok so just heat up until bushing is garbage, complete skip the part where the bolt is actually taken off and just tap the bolt out of the bushing
I mean if you’re replacing the bushing anyways and the only thing stopping you is the bolt… it’s kinda self explanatory.
The best way would be to never ever ever buy a land rover - unless you don’t mind buying another one very soon
I enjoyed the way this message is informative and helped me remember things that I simply didn't remember but used to know, thanks 👍😅
Making the bolt cold can also work very well to crack the rust. Would have to let it sit for a few minutes afterward to allow the contraction to relax.
Liquid nitrogen is the most powerful way to freeze metal, but usually not parctical. Dry ice works very wel, is cheap and easy to get. Also, there are a few brands of spray can metal freezer. They work pretty good and are very convient.
wrong
i wonder if a can of computer duster will rapidly cool the fastener and break the bond after heating it cherry red.
@dangerdavefreestyle
I have heard of it working for people. Never used myself. Also, there's a product at your parts store called freeze off(or maybe freeze out, can't remember) that is bigger and probably colder. And has a type of penetrating fluid in it.
Clean metal will transfer the cold very much better.
When my boat is on fire because I needed to remove a bolt I tell everyone you suggested me to do it.
VHF 16
"Pan-pan. Pan-pan
All ships, all ships.
I have a rusty bolt and I'm using Simon's method to remove.
Stand by for more information.
Over."
Use blowtorch will heat up the rusty and brittle bolt?
For the blow torch did you use map gas in your torch or propane. Great video even the wife loved it!
She did say map gas just re watched it! 👂
Yep, MAPP gas and nozzle/handle from Screwfix.
OH MY GOD I WAS DEALING WITH A RUSTY BOLT FOR HOURS THIS VIDEO TOTALLY WORKED, THANK YOU SO MUCH ❤️😭🔥 I can't believe it worked, thanks a thousand times ❤
I celebrate with you. Well done for getting the bolt undone. I know how you're feeling.
Great. My bolt is surrounded by plastic parts. Now what?
Brace yourself for your wallet being emptied :(
BAD ! Enough ! With Plastic ! Cases ! Too !
Keep the plastic wet
Will that work on toilet bolt that stuck at wall?
The tank was plastic.
No. The only thing that fixes a plastic toilet is to.lick the rusty bolt over and over until it comes free. Enjoy!
Wow,thats a superb explanation,nice one!!😊
Well, thank you very much.
Amazingly it works on mine❤❤❤
Use a dark thick T curve bolt instead?
Thank you so much for this video.
Bravo! Short & Sweet! And easy on the eyes!
This woman is so FIT!!!!!!!!
If you heat 6mm bolt to that temperature, is it still structurally sound to be reused?
I wouldn't risk it. Bolts are cheap to replace, just buy a new bolt and keep your mind at ease.
Thanks for watching.
Heating will often cause grade 8 bolts to break. Pitch em.
TRUE MAPP gas is no longer available in North America {not since 2008). What is called MAPP here does not heat up anywhere near as much as the original MAPP.
600 crap my van leaked out so much steering fluid and the flare but won’t butch if I did that I will make my van catch on fire including my home since is inside the garage 😢😢😢😢😢😢
How about a heat gun putting through a pvc pipe since directly still send a spark while heating is also winter and the warmest is been 2d …I’m thinking nine stop for the last 5 days ….how the heck am I going to avoid sending my awesome van to the wreckyard 😢😢😢😢😢😢😢😢
I watched at least 200 videos and 3000 ways
😢😢😢😢I’m taking the insurance off today 😢😢😢😢I’ll miss my van 😭😭😭♥️
Really GOOD !! At APPLYING HEAT ! AROUND ANY ! FUEL TANK !! That said There is a another way without applying any Heat ! Whatsoever ! And No ! It's NOT ! WD 40 ! Or RP -7 ! USE !
Thank you mam
WD40 be like: Am I a joke to you?
Gotta love the smell of WD40.
They should make shampoo.
I wanted it to unscrew, not break off.
Hey guys if you have a bycicle and havent used it for years you know this is a common problem 😂😂
Yup!
No good if you're working on a fuel line connection 😂
Well, if you're going to get a expert to explain this, she might as well be pretty too, and she is.
*BLUSH*
Gòd
Great if you own a gas axe 🤷🏻♂️
I know, right? Always a special tool you don't have.
Thanks for watching.
Thank you, i guess it wasn't hot enough
Baxwas
not useful
No, it only works on rusty bolts.
Bolt and bushing are junk! Just use cutoff wheel to cut it off! Your wasting time
This video is pointless
I never understood why Land Rover did not use stainless steel bolts...problems solved. It’s like they want all this stuff to happen.
Stainless steel is not as strong as hardened steel.
Thanks for watching!
@@WeAreBigKids Couldn't the steel be tinned? Tin doesn't corrode.
One of Two Reasons , it would last WAY ! TOO LONG ! LIKE AMERICAN GENERAL MOTORS AND FORDS ! and Two ! Just ! Way TOO BAD ! FOR BUSINESSES ! TO OPERATE !
Penetrating Oils Compared
Machinist's Workshop magazine actually tested penetrants for break out torque on rusted nuts. Significant results!
*They arranged a subjective test of all the popular penetrants with the control being the torque required to remove the nut from a "scientifically rusted" environment.*
*Penetrating oil ..... Average load*
None ..................... 516 pounds
WD-40 ............. 238 pounds
PB Blaster ............. 214 pounds
Liquid Wrench .. 127 pounds
Kano Kroil ............ 106 pounds
ATF-Acetone mix....53 pounds
*The ATF-Acetone mix was a "home brew" mix of 50 - 50 automatic transmission fluid and acetone*
*Note the "home brew" was better than any commercial product in this one particular test. A local machinist group mixed up a batch and all now use it with equally good results. Note also that "Liquid Wrench" is about as good as "Kroil" for about 20% of the price
Thanks for this. I have never, ever seen another brand of penetrating oil in the UK shops, other than WD40.
@Xavier Xavier
@We Are Big Kids
Whar of brake oil?
@@WeAreBigKids What of brake oil as penetrant?
I’m sure she needs glasses.
Can't understand once lady talks,is she doing this on purpose so we men can't learn how to remove rusted bolts? Welp,thanks to TH-cam ,there are more better grammar and diction videos.
old
Why the woman?
I prefer them to men, sorry.
Sex sells. Look at some of the comments lmao
Why put a non English speaking Eastern European for an english video?
It's the 21st century here in Europe. Deal with it.
The lower bolt on my bearing mount of my truck is rusted as i could ever imagine. Ive tried filing it down and using different wrenches. But each time it just re-strips the bolt.
I will have my uncle come over with a blow torch now. Because its been 5 hours fitting qith one bolt 😰