PLEASE READ BEFORE COMMENTING The fatal flaw for me isn't just that it has no RGB or ARGB. The fatal flaw is that there is a header on the board that looks EXACTLY like a 3 pin 5V addressable RGB header. This is actually only a 3v serial port (UART) and if you put 5v from a controller into it, bad things could happen. This is a pretty daft thing to overlook in my opinion, but i am interested to hear your thoughts. On the Discord we get a constant stream of system builders that have plugged connectors into the wrong ports, and i think this will also be one of those boards that it will definitely happen. And if it doesn't kill the board, the disappointment of informing the user that it has zero rgb support is going to be a real hard pill to swallow. Available from affiliate links: Amazon Local: amzn.to/3SbCz8K Ebay UK: ebay.us/6oNsLI Ebay US: ebay.us/ZmPQBW Ebay CA: ebay.us/Lm8rbo Ebay AUS: ebay.us/jlOHz9
I wasn't able to fit an RGB connector over the square pins of the UART header of my ASRock board. That said, people in the Discord have a talent for making things fit that aren't meant to.
So did you try to do it like you said you would? Bard says you can control ARGB through UART. The fact that it's 3v instead of 5v makes me think it will just make the leds glow less bright. I have just bought the ASRock B650M H/M.2 Do you think this one is the same in that regard? Most that could happen is the fans breaking
I don't see how this is an issue at all. If you're just plugging pins into pins without looking at the labels or anything then you're committed to playing Russian Roulette. If you do try to check the labels, you'll notice it doesn't say RGB.
You were right, it's official! "Regarding your inquiry, the UART1 header is for internal debug use, and it's not compatible with ARGB connector. Please do NOT connect ARGB connector to UART1 header to avoid any damage."
Mine arrived yesterday, just waiting the CPU and RAM arrive to see how well it will perform with the Ryzen 5 7600. Even when won't use RGB in my initial build, I'm the kind that surely would plug a RGB header on that UART port, great video!
I have this mobo with Ryzen 7600 and G.Skill Flare 6000mhz CL30 - works flawlessly. Ran into some issues with enabling EXPO but after fiddling with various settings i finally managed to make it work.
@@freezak3864 Hey what did you encounter? I'm planning building similiar parts with 7600x, this motherboard and Lexar Ares 6000Mhz in the coming weeks. How's the setup playing so far?? Grtz
@@Dailyrider94 It was just a bug where the EXPO profile setting to make the 6000mhz cl30 work didn't work and my task manager kept on showing only 4800mhz or so. I'm sure it's fixed with the newest bios update, make sure your ram is listed on ASRock's website. Other than that this combo, ryzen 7600 + 6000mhz cl30 + rtx 4070 is the best midrange combo you can buy on sale, at least in europe. It's perfectly adequate for 1440p 165hz, every esports game runs at constant 165fps, and every AA game on ultra settings with at least 60fps with dlss and frame gen, if necessary. You can't go wrong with Ryzen 7600, it's the best CPU for the money, with performance being on par with a much more expensive i5-13600k/14600k.
So nice to see a complete review on this board. I had no idea about the RGB and am glad it is addressed. I bought a BeQuiet! 500DX case which has its own RGB in it, but is minimal. One thing to note is that the RAM isn't recognized and you need this to change manual in the BIOS. I had bought Kingston Beast 2x16 5600 mhz and it read only 4800 mhz. AMD 5 7600 chip and Liquid cooler II AIO Asus 3060 Gpu Very happy with the set up and temp.
One of the few AM5 boards I will give God tier status. Price/performance, nothing beats it. 2.5 GB Lan, only two memory slots (big plus), decent VRM's and the top PCI-E slot is in the right place for a mATX build. Nice review, tyvm:) Oh, the lack of RGB headers really does not concern me: if they had to cut costs, that is not a bad place to do it.
i have personally used this board with a 7600x. its fantastic fastest boot times for am5 as i have tried many other motherboards. love the integrated io shield
most user don't even read the manual or the writing on the motherboard, they just see what fits where, our discord it littered with tales of this happening. This is why i am concerned about it. sending 5v down a 3v header might not be enough to cause a fire, but it could damage more sensitive components on the 3.3v rail
Can't seem to find the link to the m.2-wifi-card you've used. I'm about to build a pc with this board and have been searching for a cheap m.2-wifi-card
@@mikesunboxing Thanks - sadly that's unavailable but now I know the type so I'll manage to find a reseller. If you'd allow me one more question - I've bought a case with 2 RGB-fans even though I did realise that the MB did not have RGB-headers. Which kind of 3rd party thing would I need to buy to light the fans up? I'm eagerly anticipating your other videos on the motherboard!
i think the link for it is in the video description, it was a cheap one from ali express i think, or it might have been taken off of a dead motherboard i had here
This board has zero coil whine. The fan control also works great. In short, this MB works great. I rather see more stuff like this from Asrock. Try to keep it simple and performing like this. Both Gigabyte and Asus is having whine issues this time around, which leaves us with only Asrock and MSI for this gen.
Is it me or are the "50" boards getting lower specs? Nice to see "C" port on mb, odd no rgb, yet cud run high end cpu and m.2 gen5. Entry price i get but seems we get upgrades at expense of expected min stds. Thanks for reviewing Mike & Kath, hope the replacement Asus is higher spec. 👍🐈
the complexity of the new modern chipsets and VRM solutions is pushing prices higher and higher. I can remember getting a AX370 board for £30 only a few years ago what is going on, and when will we see tangible improvements revenant to the increases in pricing?
funny story, i bought this motherboard without knowing that it doesnt have argb/rgb header, and after i realize, i just get along with it and build all black pc, but i dont regret it, in fact im now joining the non rgb side 💀
@@mikesunboxing indeed that's what I thought... I mean at least give us just 1 and we can use either a splitter or a hub.. I mean I understand if they do this on their a620 line up but on b650 really asrock?
@@mikesunboxing Thank you! This will probably seem silly of me, but I appreciate a motherboard with 2 DIMM slots instead of 4 because I've heard/read that using 2 is more stable than using 4. Also, motherboards with 2 slots seem to be less expensive than motherboards with 4 slots. Ideally, an AsRock MATX motherboard would have 2 DIMM slots, AM5, and Gen 5... with included Wi-Fi. 😌
Still a nice board and up to date (ok without RGB). back in the day. 10 to 20 years ago. a PCI card upgrade was able to keep up with the new USB etc. did nobody make a RGB Pci card at all ??? there most be a ton of money in that. 😲
Michael, thanks for this video. I've bought this mobo for a VFM mid range system. I intend to install Windows 10 IoT Enterprise 2021 LTSC . Do you happen to know if this chipset is supported? Thanks. :)
@@mikesunboxing Excuse me I have one more question.The upper,small, black plastic vrm heatsink on the motherboard,in mine,moved.I could bend it slightly backwards, and when I left it, it got back in its position.But it wasn't tight and immovable. Was it the same with this one? Is it supposed to be like that,or was mine faulty? Thanks for your time.I appreciate your answers.
I love how some people are really emotional about RGB in the comments 😂tbh RGB is an ok feature not the biggest fan of it but its always a nice to have.
@@ajjames1960 If you sacrifice just 5-10% of performance with these 7000 series processors you literally cut power and temps in half, its insane how far amd pushed it with the clocks and voltages this time around.
DUMB question, I already bought this motherboard, it arrives this week, it is my first build, I also bought 6 thermalright ARGB fans and a cooler for the cpu also thermalright with ARGB, now watching this video I find out that it does not bring the ARGB connector, this means that none of my FAN will turn on the lights? or if they will turn on but there will be no way to change the colors? there is no option to control the colors?
Need fast answer Got thos board and still waiting for cpu. Just wanted to check some fans but i cant turn on the board without cpu. Did I get defective board or you cant turn on AM5 board without the CPU. Can someone confirm?
I ended up choosing the MSI PRO B650M-A. really wanted the ASRock, but at trigger time it was sold out. So I've around a bit MSI is a good brand, So I'm excited. this will be my 1st MSI product.
This is the cheapest mobo in my country. No RBG is okay for me. Just waiting for the 8700g next month so I can finally go AM5. The Pro RS looks good too but sadly not available in my country. zzzz
@@mikesunboxing Thanks for answering! i think so.. it has wifi 6e, bluetooth 5.2 and XMP/EXPO compatibility, talking about that.. can i use XMP on this with amd cpu? XMP ram are cheaper for some reason..
@@Raikas XMP ram is for Intel really , but might work on AMD, it is a risk, but it might work. Best option is to check the motherboard QVL listings and look for the RAM you are considering and see if it is listed and tested as working on the motherboard at the speeds on the box
Quick question please, What M.2 port should I use for my main system for the M.2 NVMe Internal SSD port? should I use the 1 Hyper M.2 (PCIe Gen4x4) or 1 Blazing M.2 (PCIe Gen5x4) or does it matter? This is what I have Crucial P5 Plus 2TB M.2 NVMe Internal SSD.
is it still somehow possible to correct it and install rgb in a different way, if not, maybe you recommend anothermotherboard that still has an rgb header
@@mikesunboxing can u please do just a test, open network section in task manager under downloading and check if spikes are present or not. I mean share the screenshot or video. Thanks
Before watching the video, all i hear is negative reviews for asrock motherboards. Just in general. I'll save a few bucks more for a more trusted btand
I think it depends with Asrock. Sometimes they mess up, the next gen they make pretty nice boards. The only established brands I wanna avoid are Gigabyte (shitty support, risky quality) and Asus (just cause of what they did :) )
@@Greenalex89 My current board is that nice looks white NZXT board, am4. Apparently it's built by ASRock and it's good, exept for the WiFi antenna. So I'm not sure, any thoughts on a good brand? And I've also heard about Asus and agree
Never buy Asrock they have audio problem they use Nahimic Audio software which can't be set realtek audio chip doesn't support original realtek control panel from bios gives error. Forces Nahimic to be used.. And now my board trip back to the seller.! SORRY ASROCK
I have this motherboard, i use the Hyper M.2, but i want to buy another nvme storage, i know the blazing slot is for pci 5x4, but if i buy one 4x4 same as the one i have for the Hyper m2, will it have any problem? Im sorry im not that good at english
Okay so, wait This might sound like a dumb question, but I am a certified dumbass when it comes to computer parts What exactly is the downside of a lack of RGB headers? Does it mean the RGB just won't turn on? Does it mean I can't control the RGB? I'm just very confused.
Yes it has no ability to control any additional argb or RGB devices. But more concern is from the port on the board that looks like an argb header and could be used to connect argb devices but could burn out the port or the devices
@mikesunboxing Okay, so, assuming I have a moment of lucidity from my caveman brain and don't plug into the port that looks like an ARGB header, the main downside is that there is no control of the RGB? I'm not sure I understand. As in, even if I installed software to change the color of the RGB, the software just wouldn't change the color of the RGB?
The lack of RGB is not a disadvantage, but a plus.
right up to the moment someone wants to plug something in 🔥
@@mikesunboxing Well then they're a tasteless scrub and they should reevaluate their life.
Damn, right. I even go as far as put a tape on my external drive led light.
RGB is dumb totally agreed!
Yeah, now im even more convinced to buy it. I dont want my pc to look like a christmas tree
I dont think its a "fatal flaw", maybe its a feature. Some people, like me, hate RGB/ARGB. Its a useless feature and very overrated.
Read the pinned comment and that explains it better
@@mikesunboxingIdk if it's a bug for me on mobile but your comment isn't pinned. At least not yet.
@@Hydra_X9K_MusicI also don't have the comment pinned yet. I'll reload and check after the video ends.
I read your commentary, but also would be good if we read the motherboard manual before plugging the cables.@@mikesunboxing
@@Hydra_X9K_Music sorry not sure what happened there
PLEASE READ BEFORE COMMENTING
The fatal flaw for me isn't just that it has no RGB or ARGB. The fatal flaw is that there is a header on the board that looks EXACTLY like a 3 pin 5V addressable RGB header. This is actually only a 3v serial port (UART) and if you put 5v from a controller into it, bad things could happen.
This is a pretty daft thing to overlook in my opinion, but i am interested to hear your thoughts.
On the Discord we get a constant stream of system builders that have plugged connectors into the wrong ports, and i think this will also be one of those boards that it will definitely happen. And if it doesn't kill the board, the disappointment of informing the user that it has zero rgb support is going to be a real hard pill to swallow.
Available from affiliate links:
Amazon Local: amzn.to/3SbCz8K
Ebay UK: ebay.us/6oNsLI
Ebay US: ebay.us/ZmPQBW
Ebay CA: ebay.us/Lm8rbo
Ebay AUS: ebay.us/jlOHz9
Bump.
I wasn't able to fit an RGB connector over the square pins of the UART header of my ASRock board. That said, people in the Discord have a talent for making things fit that aren't meant to.
So did you try to do it like you said you would? Bard says you can control ARGB through UART. The fact that it's 3v instead of 5v makes me think it will just make the leds glow less bright. I have just bought the ASRock B650M H/M.2 Do you think this one is the same in that regard? Most that could happen is the fans breaking
I don't see how this is an issue at all. If you're just plugging pins into pins without looking at the labels or anything then you're committed to playing Russian Roulette. If you do try to check the labels, you'll notice it doesn't say RGB.
@@npip99 It's easy to miss. But I understand your PoV, it's not something you'd get if you hadn't already been put in that position.
You were right, it's official!
"Regarding your inquiry, the UART1 header is for internal debug use, and it's not compatible with ARGB connector.
Please do NOT connect ARGB connector to UART1 header to avoid any damage."
i knew it!
Mine arrived yesterday, just waiting the CPU and RAM arrive to see how well it will perform with the Ryzen 5 7600. Even when won't use RGB in my initial build, I'm the kind that surely would plug a RGB header on that UART port, great video!
glad to hear it
I have this mobo with Ryzen 7600 and G.Skill Flare 6000mhz CL30 - works flawlessly. Ran into some issues with enabling EXPO but after fiddling with various settings i finally managed to make it work.
@@freezak3864 Hey what did you encounter? I'm planning building similiar parts with 7600x, this motherboard and Lexar Ares 6000Mhz in the coming weeks.
How's the setup playing so far??
Grtz
@@Dailyrider94 It was just a bug where the EXPO profile setting to make the 6000mhz cl30 work didn't work and my task manager kept on showing only 4800mhz or so. I'm sure it's fixed with the newest bios update, make sure your ram is listed on ASRock's website. Other than that this combo, ryzen 7600 + 6000mhz cl30 + rtx 4070 is the best midrange combo you can buy on sale, at least in europe. It's perfectly adequate for 1440p 165hz, every esports game runs at constant 165fps, and every AA game on ultra settings with at least 60fps with dlss and frame gen, if necessary. You can't go wrong with Ryzen 7600, it's the best CPU for the money, with performance being on par with a much more expensive i5-13600k/14600k.
@@freezak3864I'm getting the skillz s5 wish me luck
So nice to see a complete review on this board. I had no idea about the RGB and am glad it is addressed.
I bought a BeQuiet! 500DX case which has its own RGB in it, but is minimal.
One thing to note is that the RAM isn't recognized and you need this to change manual in the BIOS.
I had bought Kingston Beast 2x16 5600 mhz and it read only 4800 mhz.
AMD 5 7600 chip and Liquid cooler II AIO
Asus 3060 Gpu
Very happy with the set up and temp.
One of the few AM5 boards I will give God tier status. Price/performance, nothing beats it. 2.5 GB Lan, only two memory slots (big plus), decent VRM's and the top PCI-E slot is in the right place for a mATX build. Nice review, tyvm:) Oh, the lack of RGB headers really does not concern me: if they had to cut costs, that is not a bad place to do it.
i have personally used this board with a 7600x. its fantastic fastest boot times for am5 as i have tried many other motherboards. love the integrated io shield
Thanks for sharing
Second this. Used it with a 7700. Insane boot times. Also, it is dead silent. No whine.
@@FrodeBergetonNilsen Thanks for the feedback 🙂
Wait but this board said it only support 65 watts and i have a 105 cpus so idont if u are legit true
It's clearly labeled, it would be on the user's own stupidity if plugging in wrong connectors. I highly doubt that it will cause damage.
most user don't even read the manual or the writing on the motherboard, they just see what fits where, our discord it littered with tales of this happening. This is why i am concerned about it. sending 5v down a 3v header might not be enough to cause a fire, but it could damage more sensitive components on the 3.3v rail
My only question is if i got RGB RAM Would it work? They should right?
yes it will, but will need some software to control it if you don't want the default unicorn puke
Can't seem to find the link to the m.2-wifi-card you've used. I'm about to build a pc with this board and have been searching for a cheap m.2-wifi-card
www.amazon.co.uk/RUANI-Wireless-AX211NGW-802-11Ac-Bluetooth-green/dp/B0CHDZY9DQ/ref=sr_1_21?crid=251DTV10YI0UP&keywords=m.2+wifi&qid=1699366857&sprefix=m.2+wifi%2Caps%2C88&sr=8-21&tag=mikesunboxrev-21
@@mikesunboxing Thanks - sadly that's unavailable but now I know the type so I'll manage to find a reseller.
If you'd allow me one more question - I've bought a case with 2 RGB-fans even though I did realise that the MB did not have RGB-headers. Which kind of 3rd party thing would I need to buy to light the fans up?
I'm eagerly anticipating your other videos on the motherboard!
@@aarhusno1 th-cam.com/video/p2z86uMMh_E/w-d-xo.html this might help
What brand of m.2 wifi are you using? I am planning to buy it too
i think the link for it is in the video description, it was a cheap one from ali express i think, or it might have been taken off of a dead motherboard i had here
This board has zero coil whine. The fan control also works great. In short, this MB works great. I rather see more stuff like this from Asrock. Try to keep it simple and performing like this. Both Gigabyte and Asus is having whine issues this time around, which leaves us with only Asrock and MSI for this gen.
...what was the fatal flaw again ?
the ARGB header that isn't a ARGB header
I have gigabyte B650M K, and works great with ryzen 7 7800x3d and 32GB 6000mhz ram
Thanks for the video. I was about to buy one but no argb is a fatal flaw for me 😏😏
no problem. you are exactly the type of person this video was targeting
thank you for the review, i have a question tho, how is it compared with Msi b650m-P?
i prefer the the msi board myself, but the asrock has better layout
@@mikesunboxing thank you for your answer, that's help a lot, keep up the good work
Is it me or are the "50" boards getting lower specs? Nice to see "C" port on mb, odd no rgb, yet cud run high end cpu and m.2 gen5. Entry price i get but seems we get upgrades at expense of expected min stds. Thanks for reviewing Mike & Kath, hope the replacement Asus is higher spec. 👍🐈
the complexity of the new modern chipsets and VRM solutions is pushing prices higher and higher. I can remember getting a AX370 board for £30 only a few years ago
what is going on, and when will we see tangible improvements revenant to the increases in pricing?
I'm 1 day late i know. but Happy Birthday 😀
@@WilliamAPBodieMoin my friend & thank you🍾🍺
will this board work with the Ryzen 7 7800x3D? btw nice video!
Yes it will
funny story, i bought this motherboard without knowing that it doesnt have argb/rgb header, and after i realize, i just get along with it and build all black pc, but i dont regret it, in fact im now joining the non rgb side 💀
that is a really pragmatic approach, nice one
So I can use a Ryzen 9 with this motherboard for gaming without worrying?
should be fine with decent cooling
Can you recommend to me a wifi M.2 card that works with this board? I remember you've tested an M.2 card with one of the Asrock B650M boards.
sure this one should be fine amzn.to/45o2A9e
No argb header 😢
That is such a shame as the rest of the board is decent and a compelling choice
@@mikesunboxing indeed that's what I thought... I mean at least give us just 1 and we can use either a splitter or a hub.. I mean I understand if they do this on their a620 line up but on b650 really asrock?
bought a new b650m pro rs wifi for 128.29 on eb from a seller in Carlisle
What is your build? I looked into buying this mobo for my new am5.
@@nenadzivanov6974 7600x and 7900xtx in montech sky two
17:38 wtf was that flashing light?
it was a glitch in the pop up text it seems, well spotted
i dont really like rgb in the first place, so its fine by me. Thanks for video!
Fair enough!
is it worth paying extra and taking it ASRock B650 LiveMixer ?
Yea or the pro rs
Not having WiFi confuses me, so you buy it separately from a 3rd party?
yes if you need it, or buy the version of the board with it on. The Pro RS Wifi for example which isn't much more money
@@mikesunboxing Thank you! This will probably seem silly of me, but I appreciate a motherboard with 2 DIMM slots instead of 4 because I've heard/read that using 2 is more stable than using 4. Also, motherboards with 2 slots seem to be less expensive than motherboards with 4 slots. Ideally, an AsRock MATX motherboard would have 2 DIMM slots, AM5, and Gen 5... with included Wi-Fi. 😌
Please add timestamps to your videos.
Still a nice board and up to date (ok without RGB).
back in the day. 10 to 20 years ago. a PCI card upgrade was able to keep up with the new USB etc.
did nobody make a RGB Pci card at all ??? there most be a ton of money in that. 😲
yeah that is a good point
Michael, thanks for this video. I've bought this mobo for a VFM mid range system. I intend to install Windows 10 IoT Enterprise 2021 LTSC . Do you happen to know if this chipset is supported? Thanks. :)
i honestly have no idea, but it should do
@@mikesunboxing Thank you.
@@mikesunboxing Excuse me I have one more question.The upper,small, black plastic vrm heatsink on the motherboard,in mine,moved.I could bend it slightly backwards, and when I left it, it got back in its position.But it wasn't tight and immovable. Was it the same with this one? Is it supposed to be like that,or was mine faulty? Thanks for your time.I appreciate your answers.
that means i cannot control the rgb color of my cpu cooler?
yes unless you get a controller of some type
But we can add rgb controller right.
you can but it isn't a simple or cheap thing to do and unlikley to be able to control it in software
Cant see the link to the wifi card anywhere... any pointers?
try this one amzn.to/3UfJI8w
Have you used this motherboard? Is it stable?
yes it was fine, no problems at all
I love how some people are really emotional about RGB in the comments 😂tbh RGB is an ok feature not the biggest fan of it but its always a nice to have.
can i underclock and undervolt the cpu from the bios with this board?
Yes you can
@@mikesunboxing
Thank you, that's all i care about.
@@juanme555why do u want to do that? im new also
@@ajjames1960
If you sacrifice just 5-10% of performance with these 7000 series processors you literally cut power and temps in half, its insane how far amd pushed it with the clocks and voltages this time around.
DUMB question, I already bought this motherboard, it arrives this week, it is my first build, I also bought 6 thermalright ARGB fans and a cooler for the cpu also thermalright with ARGB, now watching this video I find out that it does not bring the ARGB connector, this means that none of my FAN will turn on the lights? or if they will turn on but there will be no way to change the colors? there is no option to control the colors?
that is right you will need to buy a standalone ARGB controller to make any lights work, or return the board and get the PRO RS version
Need fast answer
Got thos board and still waiting for cpu. Just wanted to check some fans but i cant turn on the board without cpu. Did I get defective board or you cant turn on AM5 board without the CPU. Can someone confirm?
needs a cpu to complete the power on circuit
@@mikesunboxing Ty so mucg
I ended up choosing the MSI PRO B650M-A. really wanted the ASRock, but at trigger time it was sold out. So I've around a bit MSI is a good brand, So I'm excited. this will be my 1st MSI product.
that is one of the better msi boards, good choice
This is the cheapest mobo in my country. No RBG is okay for me. Just waiting for the 8700g next month so I can finally go AM5. The Pro RS looks good too but sadly not available in my country. zzzz
Hi, this mobo atm here goes for 166€.. do you think going for a B650M AORUS Elite AX Ice Gigabyte at 210€ is a better value?
not necessarily better value but a better board in general, maybe that is worth the extra cost?
@@mikesunboxing Thanks for answering! i think so.. it has wifi 6e, bluetooth 5.2 and XMP/EXPO compatibility, talking about that.. can i use XMP on this with amd cpu? XMP ram are cheaper for some reason..
@@Raikas XMP ram is for Intel really , but might work on AMD, it is a risk, but it might work. Best option is to check the motherboard QVL listings and look for the RAM you are considering and see if it is listed and tested as working on the motherboard at the speeds on the box
this board hadle a r9 cpu?
it is listed to support them and probably would be fine for normal use, but all day all core loads might need to have some additional VRM cooling
@@mikesunboxing ok, its just for gaming...
Maybe a 7800x3d =)
Quick question please, What M.2 port should I use for my main system for the M.2 NVMe Internal SSD port?
should I use the 1 Hyper M.2 (PCIe Gen4x4) or 1 Blazing M.2 (PCIe Gen5x4) or does it matter?
This is what I have Crucial P5 Plus 2TB M.2 NVMe Internal SSD.
i would use the top one personally, but either is fine
is it still somehow possible to correct it and install rgb in a different way, if not, maybe you recommend anothermotherboard that still has an rgb header
the pro rs version of this board is the better option for specs and ARGB support
will rgb ram still work ?
yes it will
Fawk RGB bro!
do i need to put top m.2 heatspreader back after install m.2 ssd
can it work with m.2 heatsink or just for showing
you can use the cover heatsink if you like or not, it depends on the drive and how hot it gets
Hey. What about even cheaper b650m h/m2 model. Any good??
not seen it yet sorry
can i get a argb fan hub to get my case fans rgb
you can use a separate argb controller and hub with remote control
Isnt mediatek wifi 6e performs better than intel ax210?
seems to i think
@@mikesunboxing can u please do just a test, open network section in task manager under downloading and check if spikes are present or not. I mean share the screenshot or video. Thanks
@@rajmangalpandey3910 sorry i don't have the board now
@@mikesunboxing ok
This motherboard is textbook example of people who go woke, and are treated by society as...
i don't really understand the context here? could you explain that a little
@@mikesunboxing you mentioned this motherboard has an rgb header
Before watching the video, all i hear is negative reviews for asrock motherboards. Just in general. I'll save a few bucks more for a more trusted btand
I think it depends with Asrock. Sometimes they mess up, the next gen they make pretty nice boards. The only established brands I wanna avoid are Gigabyte (shitty support, risky quality) and Asus (just cause of what they did :) )
@@Greenalex89 My current board is that nice looks white NZXT board, am4. Apparently it's built by ASRock and it's good, exept for the WiFi antenna. So I'm not sure, any thoughts on a good brand? And I've also heard about Asus and agree
Only x2 dimm slots is disappointing.
yes but not a disaster, 2x16GB should be enough for most people for a good few years
...it's a budget board. Someone buying a sub $150 board probably not spending more than $150 on RAM as well.
Most people only use two slots so its not that bad
For me it's better because it's gonna overclock memory better
ddr5 running 4 dimms in general is just not a good idea both intel and am5
Ryzen 5 7600x
Asrovk b650 pro rs
asus dual rx 7700xt
cooler master mwe 750 bronze
crusail p3 1tb
plz review
sounds good to me
Never buy Asrock they have audio problem they use Nahimic Audio software which can't be set realtek audio chip doesn't support original realtek control panel from bios gives error. Forces Nahimic to be used.. And now my board trip back to the seller.! SORRY ASROCK
No rgb is advantage !
Hi Mike does the ATX ASROCK B450 STEEL LEGEND AMD SOCKET AM4 ATX M.2 DDR4 RGB USB C 3.1 MOTHERBOARD
Work with the Ryzen 5 5600x?
This the full atx version
yes with a bios update
No rgb hoorah.
I have this motherboard, i use the Hyper M.2, but i want to buy another nvme storage, i know the blazing slot is for pci 5x4, but if i buy one 4x4 same as the one i have for the Hyper m2, will it have any problem? Im sorry im not that good at english
that will be ok
@@mikesunboxing thank u so much, just bought it 🙏
Okay so, wait
This might sound like a dumb question, but I am a certified dumbass when it comes to computer parts
What exactly is the downside of a lack of RGB headers? Does it mean the RGB just won't turn on? Does it mean I can't control the RGB? I'm just very confused.
Yes it has no ability to control any additional argb or RGB devices. But more concern is from the port on the board that looks like an argb header and could be used to connect argb devices but could burn out the port or the devices
@mikesunboxing Okay, so, assuming I have a moment of lucidity from my caveman brain and don't plug into the port that looks like an ARGB header, the main downside is that there is no control of the RGB?
I'm not sure I understand. As in, even if I installed software to change the color of the RGB, the software just wouldn't change the color of the RGB?
RGB is for nubs
his baldness