This sword was made in the Syrian city of Damascus. This type of weapon became widespread during the Crusades in the era of Saladin because this type of sword was used and was considered one of the strongest types of swords in ancient wars.
@@ParsTajicAfghan yes it is I totally agree with that but isn't Iran a Muslim country all Muslim countries swords are basically Muslim swords am I wrong?
i am no blacksmith to critique this beautiful sword. But out of simple curiosity, isnt the notch on the scabbard a bit too long or is that length needed for the shape of this blade?
Can u make persian battle hammer Its named potak This weapon has a long handle 2 meters long and a hammer-like part made of stone or steel, which according to Iranian mythological stories has the design of a stone boffalo or a torpedo.
Why did blade and pommel were made from one piece of metal? Wouldn't it be better if the guard was made from lighter material to create more leverage in the blade?
Interested in the details of the lost-wax mould creation. You didn't have any vents and it appears that the brass sputtered when you poured it indicating that there was still wax inside the mould... Did you bake out the wax and pre-heat the mould? Could you please explain how you did the mould without any voids?
Thank you for your feedback, the wax I used is the type that has quite a lot of impurities left behind, and it created a fire when pouring bronze, and it could also be due to the poor quality of the plaster, but anyway, the product comes out. also quite good !
I wanted to ask about the creation of the sword for you it has the same level as a professional type when testing it has several possibilities and meticulous differences And I wanted to know in case I want to buy or make one
If you are a professional blacksmith, I have nothing to say, but if you are a beginner, what I want to say is that you should pay attention to the heat treatment that corresponds to the type of steel you make, otherwise it will deform after being processed. annealing !
@@Arts-and-Crafts I was not expecting this. If I had the chance to I would. But I wouldn’t lock anything down immediately. Preparations and research would be the first thing.
@@Arts-and-CraftsShamshir is a Persian saber, characterized primarily by a narrow blade of strong curvature. Most shamshirs have blades about 80 cm long (if measured in a straight line from the hilt to the tip, without taking into account the bending radius), about 3 cm wide and about 5 mm thick along the butt (at the guard). And the weight varies from 600 to 1000 g. The lightest shamshir, which I managed to find information about, weighed only 490 g. This is together with the handle.
@@Medjed-y3g Thank you, I had a small mistake after reading your comment, I weighed it again and it was exactly 1.2 kg. I think it's pretty easy for me to control
@@jojojimwood129 Just like every nation. However, here we are talking about curved swords of Central Asian Turkic-Mongolian origin. Just as they entered the Persian dynasties during the Seljuk period, they were passed on to the Arabs through the Central Asian Turks. The oldest examples of Arabian Persian swords consist of straight swords.
could you please ask an actual Persian what shamshir means? it literally means sword si your title means sword of sword what you want to say is forging a safavid Persian sword
Thank you, I'm not Persian so I don't understand as well as you, but I like this sword, I want to make it, and I have consulted historical documents about it!
@@minter5571 No dear Shamshir is an old Persian word (Pahlavi), and It means Sham=Nail, or curve, And Shir=Lion, So you can also imagine : Lion Tail, as I do 🙂
Thank you ! I'm sorry about this, but the pattern on the sword and scabbard is not a sign of Christianity, I wanted something different from the traditional sword! that's all
I like shamshir thank for forging 🙏
thank you for watching !
This sword was made in the Syrian city of Damascus. This type of weapon became widespread during the Crusades in the era of Saladin because this type of sword was used and was considered one of the strongest types of swords in ancient wars.
4:29 aww, the cat is so cute
Thank you !!
Helping!
Best Iranian sword❤
Arabic sword
@@AliAbaas-vf2cx wrong
Muslim sword ☑️@@ParsTajicAfghan
@@ninjashawn1467 It's Iranian AND WILL REMAIN IRANIAN
@@ParsTajicAfghan yes it is I totally agree with that but isn't Iran a Muslim country all Muslim countries swords are basically Muslim swords am I wrong?
This was a beautiful piece and incredibly ornate, I was actually shocked that you sliced reeds and bottles with an artistic blade like that.
Thank you for your compliments for me!
Beautiful piece!
Thank you !
beautiful shamshir
Wasn't there a longer, way more curved calvary sword they used?
Dude. Nice job
Totally a Stunning piece
Thank you !
Beautiful
Definitely want a Persian Mace
Thank you !
@@Arts-and-Crafts do the Mace of freidoon(گرز گاوسر فریدون) which is shaped like the head of a bull and has a high place in Persian mythology
Magnífico trabalho, magnífica shamshir...a que é curva igual a unha do tigre. Saudações do Brasil.
Dónde puedo conseguirla en Venezuela
Nice work
i am no blacksmith to critique this beautiful sword. But out of simple curiosity, isnt the notch on the scabbard a bit too long or is that length needed for the shape of this blade?
Very beautiful peace of art, but the blade was unevenly heated during heat treatment.
thank you !
Can u make persian battle hammer
Its named potak
This weapon has a long handle 2 meters long and a hammer-like part made of stone or steel, which according to Iranian mythological stories has the design of a stone boffalo or a torpedo.
One of the great sword 👌👌👌👌👍👍
Hello. Very nice shamshir. Do you sell these as well?
cảm ơn bạn đã thích nó, tôi không biết bán nó bằng cách nào !
Vivaaa .TnX from IRAN
Arabic sword
Thanks friend from Iran
@@AliAbaas-vf2cxarabian sword is so different with our Parsian sword(shamshir). Our sword is so older than arabian sword
What is the type of sword?
How much. this is an impressive piece of art.
Thank you for liking it, unfortunately it was given to a friend of mine!
Great. Congrats.
ktir helwi, I like the project.
Thank you !
Cool, i lije Shamsir, but when you will forge an otoman kilij??
Thank you, maybe in the future I will do it!
Why did blade and pommel were made from one piece of metal? Wouldn't it be better if the guard was made from lighter material to create more leverage in the blade?
how did you get the inlay perfect for the langlet on the grip? I noticed you skipped that part in the video
Nice❤❤❤❤❤
Persian sword forever
The Arab sword that conquered Persia
@@AliAbaas-vf2cxهاهاهاها...😄😄صحیییح..👌🏻الیوم..هذا ایران فاتح کلللل دوَل العربی...👌🏻😉سوری..عراق..لبنان..یمن .وکل شرق الاوسط.هذالصحیح👌🏻
Very beautiful ❤
What us black liquid you use for handle and cover ?? Can you tell me please
Awesome work keep it up
Thank you !@
So perfect ❤
nice , i like to see forging sword.is it same as the real one??
It's 90% similar
Mashallah ❤ bohat khoob good
Bohot badhiya bhai
😁
Interested in the details of the lost-wax mould creation. You didn't have any vents and it appears that the brass sputtered when you poured it indicating that there was still wax inside the mould... Did you bake out the wax and pre-heat the mould? Could you please explain how you did the mould without any voids?
Thank you for your feedback, the wax I used is the type that has quite a lot of impurities left behind, and it created a fire when pouring bronze, and it could also be due to the poor quality of the plaster, but anyway, the product comes out. also quite good !
Shashir était l'épée le plus jolie du monde
New sub❤
I wanted to ask about the creation of the sword for you it has the same level as a professional type when testing it has several possibilities and meticulous differences And I wanted to know in case I want to buy or make one
How to do order
Best sword in the world
For sale?
How much for you to make?
Sweet build especially considering the fact that you used mainly basic tools.
Thank you, knowing how to make use of what we have will make us better
Wait,THATS how the sheath works?
Hey me and my buddy were actually wanting to use his forge to make a Shamshir. Is there any tips you can give us?
If you are a professional blacksmith, I have nothing to say, but if you are a beginner, what I want to say is that you should pay attention to the heat treatment that corresponds to the type of steel you make, otherwise it will deform after being processed. annealing !
очень красиво сделано с душой
Thank you !
قیمت چنده؟
超愛這種刀
Awesome
Thank you !
lovely
I'm sold; how much are you charging for one?
You mean you want to buy it?
@@Arts-and-Crafts I was not expecting this. If I had the chance to I would. But I wouldn’t lock anything down immediately. Preparations and research would be the first thing.
@@elishaberry611 Thank you, hope you get what you want soon
How many grams does your sword weigh?
All weigh about 2kg
@@Arts-and-CraftsShamshir is a Persian saber, characterized primarily by a narrow blade of strong curvature. Most shamshirs have blades about 80 cm long (if measured in a straight line from the hilt to the tip, without taking into account the bending radius), about 3 cm wide and about 5 mm thick along the butt (at the guard). And the weight varies from 600 to 1000 g. The lightest shamshir, which I managed to find information about, weighed only 490 g. This is together with the handle.
@@Medjed-y3g Thank you, I had a small mistake after reading your comment, I weighed it again and it was exactly 1.2 kg. I think it's pretty easy for me to control
مبدع ❤
👍🏽kabzasına verdiğiniz işçilik süper , elinize sağlık 👏🏽
Thank you
Không thích kiểu kiếm này cho lắm. Nhưng mà bác làm chi tiết ghê
Càng ngày phải tăng độ khó lên chứ bạn :))
احسنت وابدعت استمر يابطل🤩👍🏻
Thank you for supporting me, I will keep trying to upgrade every day!
Niceee
thank you !
@@Arts-and-Crafts god bless you ♥️.
You doing very very good work. I wish You get 100k Subscriber soon.
LOVE FROM INDIA🇮🇳
❤️❤️❤️❤️❤️
@@Arts-and-Crafts i watch the full video. In almost end of the video i see you smoking cigarette. Don't do that shit please.
@@SUMIT..8980 Thanks for your good wishes, I appreciate your advice too,
i like Shamshire
Thank you!, me too
Cool.
😁
Originally, Persian swords were straight and double edged. Curved sabre blades were Central Asian in origin.
The Persians had different kind swords during different centuries, and Shamshir is one of the most famous.
@@jojojimwood129 Just like every nation. However, here we are talking about curved swords of Central Asian Turkic-Mongolian origin. Just as they entered the Persian dynasties during the Seljuk period, they were passed on to the Arabs through the Central Asian Turks. The oldest examples of Arabian Persian swords consist of straight swords.
Wow!
Nice work👍. How you tempered the sword after quenching?
Thanks for watching, sorry I didn't understand your question well, maybe google translate error
Wooowwww... keren bang
Make me one!
Wallahi
could you please ask an actual Persian what shamshir means?
it literally means sword si your title means sword of sword
what you want to say is forging a safavid Persian sword
Thank you, I'm not Persian so I don't understand as well as you, but I like this sword, I want to make it, and I have consulted historical documents about it!
شمشیر (shamshir)
Is the persian word for "sword"
Literally
@@minter5571 No dear Shamshir is an old Persian word (Pahlavi), and It means Sham=Nail, or curve, And Shir=Lion, So you can also imagine : Lion Tail, as I do 🙂
Please forge ertugrul's sword from the Turkish series
Yes sir !
Şimşir Türk kılıcıdır. Bilmeyenler tarihini araştırsın.
❤❤❤❤
🌟👍
How much?i wants shamshir
pleas sale to me pleas
Masyaallah
سوينا سيف الفقار علي بن ابي طالب رضي الله عنه زواج سيف الفقار وكلها كلها يبيش سونق بونق سيف الفقار اسود
The grip is too large. Typical western blacksmith who never trained with a weapon like this.
sword scabbar are sually covered whive leather !!
Achaemenid Cyrus did not use this sword This sword model is mostly used by Arabs I am Persian and thank you for your attention to the Persian sword🌷
Thank you. I really like Persian sword models and fairy tales in books
الاسود 100% السيف الاسلام عبير ابيش
nice craftsmanship but none of the persian items have christian pilgrim details. This is an insult to their beliefs.
Thank you ! I'm sorry about this, but the pattern on the sword and scabbard is not a sign of Christianity, I wanted something different from the traditional sword! that's all
Persian 😂🤦🏻♂️
That's arabic too
Waht a waste of time