How To Replace BMW E46 Front Wheel Bearings 318i 323i 325i 328i 330i M3
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- GO TO MY WEBSITE AND BMW FORUM !!!
www.nathansbmw...
CLICK HERE TO BUY YOUR NEXT CAR PARTS FROM MY AMAZON STORE
www.amazon.com...
How To Replace BMW E46 Front Wheel Bearings 318i 323i 325i 328i 330i M3
CLICK HERE TO DONATE TO THE CHANNEL
www.paypal.com...
nathansdiygarage
/ nathansdiygarage
/ nathandiygarage
To see my other Channel "Nathan's MRE Click Below
/ @nathansmre
To see my other channel Nathan's World Click below
/ @nathansporscheworkshop
Send stuff to my PO box for products you want reviewed or for a shout out on the channel,
Nathans DIY Garage
PO BOX 115
Altenburg MO
63732
For Business Contact :
Nathan's BMW Workshop
Po Box 115 Altenburg Mo 63732
nathan.youtube@yahoo.com
For the sake of 3 10mm bolts why not remove the brake splash guard? Makes removing the inner bearing race easier. Great video.
Mr. Nathan; From technician to technician, Great content and great, down to earth work.
Thank you. I hope this is my problema
I want thank you for being real about these repairs I just came into a 2001 325ci within a week the radiator gave out replaced it yesterday along with upper and lower hoses expansion tank thermostat oil cooler, and also my valve cover gasket and all of sudden today I noticed a damn oil leak are these cars like that you fix one thing another thing goes out any suggestions will be appreciated 👍
Great video, but I recommend one additional thing. PB blaster on the rusty stuff.
A tip for you my man the long air hammer the longest shaft air hammers are like so easy to handle those little short ones just bounce out of your hand
Anyone notice when Nathan was explaining where to purchase the socket and 1/2” adapter online the video was interrupted by an O’Reilly auto parts commercial🤣🤣
I bought a new inner dust seal and hit it from the back with a pry tool and slid right out
Great video and very well explained thank you very much mate (nick from Sydney Australia )
How much milimetar for centre screw
Thanks Nathan great vid.
E36 320i and E39 520i
If I’m just in need to change the outer bearing, is it required to change both? Curious if you changed the inner since you’re there anyways or if it’s common practice. Awesome vid!
Hi Nathan, Im looking to replace the brake dust shields on my M3. Now once you remove the main part of the bearing leaving the inner race on the shaft, will the main part of the bearing just slide back onto the shaft and onto the inner race without any problems. ? Cheers
Great vid! Can you advise which way the new bearing is meant to be pressed in? The new bearing kit i have has the same colour dust covers either side so i don’t know which side has the encoder in it for the ABS sensor to read. Can you help advise?
I am doing this. I put the new axle nut on & feared I over torqued it with the impact as it seemed a little stressed when I spin the bearing assembly. Is it possible to over tighten the axle nut crushing the bearings? I backed it off. Is it unsafe to put back on? It screwed on easier the second time. I never crimped the end yet.
Thanks in advance.
Question about thread in wheel studs, in your experience is it safe to re-use studs installed on to older hubs or if we are replacing the hubs/bearings should we also get new studs?
Hi, did u know X models are not build the same?
Nathan, you are the man! Thank you.
What impact wrench do you use please?
Thanks again Nathan!
No need to grease it?
Is this same process for bmw 2012 328i
What is the model number of that Makita Impact wrench that you are using ?
thank you Nathan for the diy videos your advice on the m62 tu timing belt and tensioners changing was really handy and helpful for me. great content sir
i realize I am kinda randomly asking but does anyone know of a good website to watch new movies online?
@Solomon Orion Flixportal =)
@Immanuel Hassan Thank you, I signed up and it seems like a nice service :D I really appreciate it!
@Solomon Orion glad I could help =)
Great video well done
how powerful is your impact wrench in NM, footpounds is an American thing. it's like 2/3 or 3/4 of a NM.
Great video!!
I’m not really that confident in trying this due to only one thing , I’m worried I’ll get stuck with the race
Nice job 👍🏼👍🏼👍🏼
Great job!
So someone tried to drill out my axle nut at some point and pretty much just mashed it into the end of the axle there's absolutely no way it's being removed by turning any suggestions? I have a brand new axle and axle nut and I'm just about willing to replace anything just short of the knuckle LOL pretty much refreshing the entire suspension I already got the coilover kit adjustable this adjustable that just can't get the old axle off lol
Had a welded wheel hub and had to replace my entire trailing arm and axle
great video!! Love your work! I'm a bmw fan and i trying to buy an e36 325
do you have any advice for that particular model? the motor is M50b52 i think
they are good cars but they are getting older, so you have to deal with alot of brittle parts
Thank you
Hey Nathan I had a question if you wouldn't mind answering I'd appreciate it.
It's about a different platform all together, I'm currently swapping injectors on 08 Bmw 335i e92 and wanted to know your recommendation on injector coding or setting the values on them and what tool would you use?
There are handhelds that do that, my autel will, the foxwell nt510, Carly , and many more
Nathan's DIY Garage wasn't to sure about this but couldn't get a solid answer from Amazon. ..Thanks
You didn't need to torque the bearing nut to a specific ft/lbs?
This is the second video I have seen this repair without a concern for the torque spec on that nut... I am sure there is a value assigned to it.
@@PeterPounders for the E36 which uses the same design it is 290 nm
@@blaiserascal can only imagine how much that torque wrench is gonna cost....
@@siddharthnandi8567 I rented one for that specific job, it didn't cost much and it's done properly :)
I like you man, but that intro music was to much. Thank God I only had one ear bud in
8:16 why did you take that off and didn’t put it back on ????
cuz that part is already embled on new part