This is a Great Find !!! But from your Aspen , you could have used the CAN wires and it would have worked. I did follow the wiring diagram from a 2008 Chrysler and , using a used connector , swap wires from my 2005 radio and it worked via CAN Data. But your find will let me install this radio in a Non CAN vehicle !!!! Thanks Again !!!!
Man you are a lifesaver you know I've been messing with this radio for God knows how long and still couldn't figure it out wow God bless you you just made my life so much better
Mannnnn I can't thank you enough for making this video. I had the EXACT issue. Replaced my old beat up factory harness with a new metra oem harness and had no power. You solved my problem and got rid of my headache lol thank you.
WOW! You're amazing! I too searched all over the web for info and just today spotted your video,Thanks man! I have three of these units from a pick and pull yard and thought they were no good, Perfect! can't wait to try it.
Gracias me funciono, en un 730N, tener en cuenta la potencia minima es 12v con 2A, la prueba del video es con 12v 3A / Thanks, it works for me in 730n, the minimun power is 12v 2A, in the video is 12v 3A.
Correct me if I'm wrong, but some radios have low speed and high speed, making sure your vehicle is low speed or high speed compatible, if not your radio will not work or turn on. Is that right? Or is that only for jeep?
thank you for this, i have a RHB version and im hoping the pins are still correct that you pointed at so i can do some testing in the house to see why mine is no longer working. THANKS AGAIN!
hi thanks for the video I picked up a mygig today, I have power to the button lights but thats it, I may have the same problem as you, I have a dodge nitro the radio is from a jeep my harness plugs straight in but maybe the pins are different on the dodge to the jeep
there are 2 different canbus speeds for these radios a lowspeed bus or a highspeed bus, they cannot be interchanged and you cannot make them work without using something like a mygig lockpick. do not try to power the radio like is shown in this video, it will not work and could permanently damage the radio... unless you have a highspeed rbz mygig, I would not risk damaging the system.
Hola qué tal, oye una pregunta en tu estéreo donde se conectan los arnes tienen dos hileras de pines? Es decir donde están las patitas más gruesas esa es una hilera de pines y arriba tiene otra hilera de 10 pines?
At the 1:14 mark, you show the back of the stereo. One of the jacks is for the main plug. I believe the small on in the middle is Bluetooth. Do you know what the other jack is for? I am hoping it is for video output...
I am really suprised that you got this My Gig radio to work, since usually they are security code protected, once you take them from another vehicle and try to fit them to another you have to enter a 4 digit code which it promps you to enter on screen. I am puzzeled that you did not have to enter a code? Well done though.
Me sirvio mucho tu video , pero te comento mi problema para que sepas mas o menos lo que te paso ati . el problema es el canbus de la camioneta que es low speed , y estos radio son high speed . por eso no lograbas encenderlo Saludos
Disculpa amigo que se tiene que hacer para que vuelva a funcionar, tengo una cheroke y ya no quiso encender, como hiciste para que funcionara de nuevo?
Hi, plz, i have problem with mygig rew, stuck in logo dodge, i remove hdd but i have same problem, i have disconnect the battery but no solve problem, any idea plz ?
I’m sorry for late response I haven’t checked my channel in a few months. . What I did was I ordered the matching wire harness clips on Amazon that just clip in the appropriate slots in the harness
hi bro ... regards, men could you help me?? i have the same problem i bougth a wire harnes but not worked do you have the wire diagram that u used for??? greeting from colombia 👍
there are 2 different canbus speeds for these radios a lowspeed bus or a highspeed bus, they cannot be interchanged and you cannot make them work without using something like a mygig lockpick. do not try to power the radio like is shown in this video, it will not work and could permanently damage the radio... unless you have a highspeed rbz mygig, I would not risk damaging the system.
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
This is a Great Find !!! But from your Aspen , you could have used the CAN wires and it would have worked. I did follow the wiring diagram from a 2008 Chrysler and , using a used connector , swap wires from my 2005 radio and it worked via CAN Data.
But your find will let me install this radio in a Non CAN vehicle !!!!
Thanks Again !!!!
Man you are a lifesaver you know I've been messing with this radio for God knows how long and still couldn't figure it out wow God bless you you just made my life so much better
Great video helped me and when my friend had the same issue this fixed his radio. You’re a good man. Thank you
Mannnnn I can't thank you enough for making this video. I had the EXACT issue. Replaced my old beat up factory harness with a new metra oem harness and had no power. You solved my problem and got rid of my headache lol thank you.
WOW! You're amazing! I too searched all over the web for info and just today spotted your video,Thanks man! I have three of these units from a pick and pull yard and thought they were no good, Perfect! can't wait to try it.
Thanks dude! Thought I had purchased a dead unit and after I tried this and she fired right up 👌🏽
It will work only on RBZ Models. Other units require High or Low CanBus signal to operate.
ABSOLUTE LIFE SAVE!!! Thank you soooooo much!!!! This was my exact problem, I googled and your video was first to pop us and BAM! Thank you!!
I understand what is the problem, so what is the solution to making it work in the car? Do you have to buy a different wiring harness?
Thanks Man! works fine on RHB
Gracias me funciono, en un 730N, tener en cuenta la potencia minima es 12v con 2A, la prueba del video es con 12v 3A / Thanks, it works for me in 730n, the minimun power is 12v 2A, in the video is 12v 3A.
Como lo reiniciaste ?
Correct me if I'm wrong, but some radios have low speed and high speed, making sure your vehicle is low speed or high speed compatible, if not your radio will not work or turn on. Is that right? Or is that only for jeep?
I don’t know. I am not a professional…. I just got lucky and stumbled on this solution after a lot of frustration lol…
thank you for this, i have a RHB version and im hoping the pins are still correct that you pointed at so i can do some testing in the house to see why mine is no longer working. THANKS AGAIN!
Did it works with your RHB?
Curious if anyone has got the steering wheel controls to work on non can bus vehicle with RBZ or RHB radios
So did you just add a wire in the wire harness in the spot and bridge it off the power wire?
Yes I added a wire to the harness
hi thanks for the video I picked up a mygig today, I have power to the button lights but thats it, I may have the same problem as you,
I have a dodge nitro the radio is from a jeep my harness plugs straight in but maybe the pins are different on the dodge to the jeep
there are 2 different canbus speeds for these radios a lowspeed bus or a highspeed bus, they cannot be interchanged and you cannot make them work without using something like a mygig lockpick. do not try to power the radio like is shown in this video, it will not work and could permanently damage the radio... unless you have a highspeed rbz mygig, I would not risk damaging the system.
The RBZ is a non-nav unit. Sure you've figured that out by now. Hope the guy's issues were in the radio, because BT is ran in a separate module.
Gran video, yo también compré uno igual y lo había conectado y no funcionaba, hasta que ya vi tu video pude hacer que funcione. Gracias!!!
Hola qué tal, oye una pregunta en tu estéreo donde se conectan los arnes tienen dos hileras de pines? Es decir donde están las patitas más gruesas esa es una hilera de pines y arriba tiene otra hilera de 10 pines?
@@fidomontano2204 es el de arriba
Hola disculpa cómo hiciste para que funcionara?
@@L13-c7x lo iso funcionar? Ami no me prendio ni arriba ni abajo
De donde conectaste el auxiliar? Para saber si el arness que de mi carro no tiene ese cable
At the 1:14 mark, you show the back of the stereo. One of the jacks is for the main plug. I believe the small on in the middle is Bluetooth. Do you know what the other jack is for? I am hoping it is for video output...
The small square plug in the middle was for the steering wheel controls for volume, and radio tuning
I am not sure about the video out on these models “. The majority of the ones I see have the av plugs attached to the radio
I am really suprised that you got this My Gig radio to work, since usually they are security code protected, once you take them from another vehicle and try to fit them to another you have to enter a 4 digit code which it promps you to enter on screen. I am puzzeled that you did not have to enter a code? Well done though.
the code is 0000
I’m having the same problem I got a 2011 Dodge Avenger rbz radio nav and try putting it in my 2011 Jeep Wrangler and it’s not turning on
Me too. Wont work in my 2011 jku even tho the cables match up.. radio is from a 2010 grand Cherokee
Where do I pull the power from that goes to the Aux pin?
Me sirvio mucho tu video , pero te comento mi problema para que sepas mas o menos lo que te paso ati . el problema es el canbus de la camioneta que es low speed , y estos radio son high speed . por eso no lograbas encenderlo Saludos
Yo también tenia ese problema
Disculpa amigo que se tiene que hacer para que vuelva a funcionar, tengo una cheroke y ya no quiso encender, como hiciste para que funcionara de nuevo?
Hi, plz, i have problem with mygig rew, stuck in logo dodge, i remove hdd but i have same problem, i have disconnect the battery but no solve problem, any idea plz ?
Hi, does this radio have the option for a backup camera??
I think it does have a video input in back of unit
I dont speak english...
What is "the volts?" Of your adapter?
How did you connect it, I need help please
I’m sorry for late response I haven’t checked my channel in a few months. . What I did was I ordered the matching wire harness clips on Amazon that just clip in the appropriate slots in the harness
Странно, обычно при подключении любой магнитолы всегда нужны 3 провода, + bat, - GND, + acc
Yes thank u
hi bro ... regards, men could you help me?? i have the same problem i bougth a wire harnes but not worked do you have the wire diagram that u used for??? greeting from colombia 👍
Como lo conectaste auxilio ayúdame
Wich one is the correct?
Which what are you asking?
@@keithonwright I found it but it asks for a code 😢
By the way the default security code is 0000
This doesn't work for REN model. I have tried.
Dod you ever figure out what works for the REN?
there are 2 different canbus speeds for these radios a lowspeed bus or a highspeed bus, they cannot be interchanged and you cannot make them work without using something like a mygig lockpick. do not try to power the radio like is shown in this video, it will not work and could permanently damage the radio... unless you have a highspeed rbz mygig, I would not risk damaging the system.
Lo puse igual y no funciona
Hola..a cuales pines van los 12v??
the 4 digit code is universal 0000