Actually the second base is at 500, but the default setting is 800, so 800 looks better than 400. You can try to crank it to 500, but it's easier to just switch to 800.
Actually if you just adjust the speed of a 30fps clip to match your 24fps timeline, there's a pretty big chance you'll still get dropped frames every now and then. Ideally you should go into "Interpret footage" of a 30fps clip and change it to 24. That way you know each frame will be displayed correctly in sync.
love the video! just one question. How do I know if my exposure is on point while shooting on d cinelike... what's the number I should always to remember on MM???
Good question! You can balance your EV scale at 0. You can also look at your histogram, a trick I like to use is sometimes set up the exposure in normal mode. Then switch to D-Cinelike and see how much the histogram changes.
hey mate so when I change the FPS to 30, the shutter speed to 1/60 and the Iso to 100 obviously we have that overexposed look, but when I apply the filters it just looks crazy dark for example (lets say its a bright day) the ND16 won't be dark enough and then the next one might be too dark? but when I leave the Iso on auto or manually change it to higher it usually looks a lot better however I've seen multiple videos that say leave it at 100? any help here? would be much appreciated, can I leave the Iso on auto and keep the rest of the settings to get that motion blur? Thanks mate, love your videos
Hey. Whenever I switch to pro mode, not matter what ISO I change it to its hyper overexposed. At 800 it’s completely white and at one hundred you can just barely make out details. What should I do?
Hy i am from india i like your TH-cam videos can you make a video on how to colour graid video in android mobile like a pro like your TH-cam video colour graid for youtubers i am aslo youtuber but i don't have any pc i have a Android mobile phone OnePlus Nord 2 but i like your video colour graid thats why can you plz make a video...?
Hey guys, maybe you could help, I don't know why, but I can't control my camera settings. I just have the possibility to decide if I want subtitles... Update my RC and my mini 3 pro, didn't help... Has someone an idea? I'm a bit at the end of the road right now :). Thanks
Drone must be on and connected to the controller for it to change camera settings. Make sure to work fast because if the drone is not flying it will overheat!
You all copied word by word Philip Bloom’s -2 Sharpness -1 Noise reduction settings and then you pretend it was your expertise that lead you to that… only a few TH-camrs acknowledged it and props to them, the rest of you… nah.
Not everyone has the time to watch EVERY drone tutorial ever posted on TH-cam.. the point is to get the information you need even if all these guys doing tutorials are ALL saying the same thing. Who cares as long as the information is right. That’s what people need from these videos. Copy paste repeat. 😉👍 Get the job done
One of the most useful videos I recently seen!
OMG this video was amazing straight to the point and the little pop ups reminding what was said
You earned a sub my friend
This is amazing! Thank you!
Thanks mate, just been given one of these from a client, unreal bit of kit!
This was excellent. Thank you for being so articulate, short and sweet.
Ye totally agree with those settings, taking sharpness to -2 is so important. Cheers.
Awesome video
Thanks for making it short and on point.
Thank you! Fabulous, easy to follow video. Thanks for your time! 👍🏼👍🏼
I just love how you explain ❤
that was great man, thanks. I appreciate the hard effort and work put into this
Awesome, thanks for this - for once a super useful, super clear tutorial. Awesome, thanks again!
This was a great video and was very helpful. Keep it up 🔥
Amazing, going to go home and set this up. Much appreciated!
Anytime! Lmk how they work :)
nice video! well done! How do you expose in D-cine? its a flat profile, this part confuses me. Over expose like log footage on Sony?
My brother THANK YOU! Very helpful.
Very good man, thanks!
Excellent Video very informative thankyou
Thanks man for real no nonsense suggestions
Very weel, tankyou - For me the best video to improove footage.
Just learned a lot. Thanks, 👌🙌man. U got just got a new sub
Excellent information! Thank you
Any videos about settings for yaw and roll? Great vid btw
Great advice, thank you!
Legend!
Super helpful! Thanks so much for making this video!!
That’s super helpful thanks.
I would love to try some of those polarpro Angie filters. How do I get into reviewing products like this products like that?
This is amazing! Thank you! 👊🏼
Much love 🙏🏽
Very helpful! I didn't know it had dual native ISO at 800
Yessir happy to help 🫡
Actually the second base is at 500, but the default setting is 800, so 800 looks better than 400. You can try to crank it to 500, but it's easier to just switch to 800.
Actually if you just adjust the speed of a 30fps clip to match your 24fps timeline, there's a pretty big chance you'll still get dropped frames every now and then.
Ideally you should go into "Interpret footage" of a 30fps clip and change it to 24. That way you know each frame will be displayed correctly in sync.
awesome dude
subscribing!
love the video! just one question. How do I know if my exposure is on point while shooting on d cinelike... what's the number I should always to remember on MM???
Good question! You can balance your EV scale at 0. You can also look at your histogram, a trick I like to use is sometimes set up the exposure in normal mode. Then switch to D-Cinelike and see how much the histogram changes.
@@airbazooOK, but of some of the cenes are darker/lighter how the drone will compensate when shutter speed and ISO are locked?
use zebras
Thanks! Very helpfull! I hope I can use most of the same settings on my Mini 2, MA2 and P4P+.
🙏🏽🙏🏽
Increase control smoothness.
Hello, this is an interesting video.
I will subscribe to your channel from Japan.
I look forward to seeing more great videos.
Thank you
Which ND Filter should i use for Daylight Videos?
hey mate so when I change the FPS to 30, the shutter speed to 1/60 and the Iso to 100 obviously we have that overexposed look, but when I apply the filters it just looks crazy dark for example (lets say its a bright day) the ND16 won't be dark enough and then the next one might be too dark? but when I leave the Iso on auto or manually change it to higher it usually looks a lot better however I've seen multiple videos that say leave it at 100? any help here? would be much appreciated, can I leave the Iso on auto and keep the rest of the settings to get that motion blur? Thanks mate, love your videos
He says in the video to adjust the iso if you need to, which in your case i think you need to 👍
Hello, how are you? I recently got the caution flight error on the Air 2S drone and no GPS! Can you help me?
Longos! Ha. A fellow GTA'er
haha yesss!!
Hey. Whenever I switch to pro mode, not matter what ISO I change it to its hyper overexposed. At 800 it’s completely white and at one hundred you can just barely make out details. What should I do?
I have the same problem! What’s going on??
Have you tried using ND filters?
You need an ND filter. Or shoot at sunset or low light situations
d cinelike very noisy for some reason... i only use it on night shots with 800 iso.. then it make sense... on a day time with 100 iso its crazy noisy
Why do you have music in ba kground I can't handle it
Hy i am from india i like your TH-cam videos can you make a video on how to colour graid video in android mobile like a pro like your TH-cam video colour graid for youtubers i am aslo youtuber but i don't have any pc i have a Android mobile phone OnePlus Nord 2 but i like your video colour graid thats why can you plz make a video...?
Hey guys, maybe you could help, I don't know why, but I can't control my camera settings. I just have the possibility to decide if I want subtitles... Update my RC and my mini 3 pro, didn't help... Has someone an idea? I'm a bit at the end of the road right now :). Thanks
Drone must be on and connected to the controller for it to change camera settings. Make sure to work fast because if the drone is not flying it will overheat!
Thanks, but I had to turn off sound because of the annoying and (for me) disturbing background music.
Apologies! Thanks for the feedback
You all copied word by word Philip Bloom’s -2 Sharpness -1 Noise reduction settings and then you pretend it was your expertise that lead you to that… only a few TH-camrs acknowledged it and props to them, the rest of you… nah.
Not everyone has the time to watch EVERY drone tutorial ever posted on TH-cam.. the point is to get the information you need even if all these guys doing tutorials are ALL saying the same thing.
Who cares as long as the information is right. That’s what people need from these videos.
Copy paste repeat. 😉👍
Get the job done
@@RaduJon lazy and lousy reply kid… no bueno.
i'm avoiding 24fps. 30 is where it's at.
Personally i just cant use anything else besides 60, its night and day difference between 30-60 for me, from choppy footage, to absolute smoothness.
I personally prefer the industry standard of what pleasing footage looks like. 60 looks terrible to me. Soap opera effect.
doesnt this drone have a 120fps option?
@@tirke6599 Yes, in 1080p
@@lukastemberger Thanks, good to know.
D-cinelike looks so bad everything so cold a lot of people saying it looks so good
You have to colorgrade your videos
Dundas/Trafalgar. Oakville Big up!
Good video
Right on 🦾👊🏻
Appreciate you dude
This was super helpful dude, thank you!!