Shop Online! - www.thebicyclestation.com/ Quick correction, the ENVE cockpits are actually made in Utah. So they rims and the cockpits are us made. Super neat!
I appreciated the attempt at PPE when cutting the steerer tube haha. Carbon particles cutting your lungs with every breath for the rest of you life doesn’t sounds too fun
Damn, you got the one piece AR cockpit? That's so sock. Now I'm going to watch this whole video. I can't wait for Enve to release the road SES one piece cockpit for the price of $9,000.
Thanks- I may follow your lead. I did not yet attach the shifters so I can pull them. It was feeling like the sleeves were making it hard to fully pull the hoses through.
Yea I love gloss wheels like that. The whole 2.1 tire thing just looked a little off to me so I switched it. If you dm me on instagram I’ll send you a pic of what it looked like with the 3.4s
The 1 piece bar/stem comes with 2 short pieces of foam sleeve. Assumably to baffle noise inside the bar/stem. I do agree that they are a hassle to use because they bind up at the exit hole where the hose exits and goes external as you mention. It sounds like you did not use them? Glad to hear there is no noise. I may follow your lead.
It looks like you chose to forgo using the small sleeves that go inside the 1 piece bar/stem for the hoses? Do you find that it doesn't make a difference with respect to noise? Or just a hassle to get them in the bars?
Is that the XX SL crankset and if so, did you use the stadard or wide version and what spacers did you use to acheive the 55mm chainline? I am about to start a very similar build and that info would be very helpful!
I’m doing a similar build but with force road wide crank. It seems like a ton of spacers where the spindle isn’t going to rest on the bearings. How many spacers did you have to use? And did you use inboard t47 BB?
@@bam0505 I used a T47 inboard Wheels Mfg BB. Im not certain the exact number of spacers i used or on which side, i just added spacers to the drive side until a had the desired 55mm chainline, then filled out the gab on the non-drive side. Wheels Mfg bbs come with plenty of scaers included in various iszes, so it makes it pretty simple. I had no issudes wit hthe crank spindle not being on the bearing surface, there was plenty of room. I used a standard mtb width axle Dub XX SL cranks set, which is the same width as a DUB road Wide crank set.
Thanks. That’s helpful. I used the same wheels mfg bb and using SRAMs suggested 2.5/5.5 spacers the preload was coming off the threads. I have it now with I think 6.5 on the drive side. Crankset seems to be centered. But I’m a bit worried about the spindle not resting on the actual bearings. I’ve never understood why spindles are skinnier in the middle… also is it the case where this is less likely an issue with mtb vs road wide spindle because the contact points are different lengths??
pro tip for the frays bic lighter then just a tad. too much and it could catch a flame and look burnt or bubble just stop it out with bottom of the bic, mess on your hands no go.
@@bicyclestation wouldn't work with like a zippo has to be bic. Anywho I'm learning myself no shop to my name but building stuff is cool like yeah made that!
@@bicyclestation thats the Power meter one? hehe Honestly why running the XX rearD instead of one of those for road/gravel ? Or is it intended for gravel also? Im running it on my 85 NM ebike, which seems sketchy now..
@@bicyclestation seems like the 168 q factor has bigger demand, hence we are in luck. I just aquired the xx power meter with Big q factor 174 at 800$ Seems cheap compared to 1000 lol Prices is insane at this point
My rich dad buys them all for me lol. Being serious, It’s part of my shops marketing budget. It’s very rare when we lose money reselling them. And if we do it’s not more then a few hundred dollars. The sales generated from these videos far outweighs the cost of making them. I have more firsthand knowledge of the bikes then most any bikeshop employee in the world and when I’m selling a bike to a customer I can be 1000% confident in what I’m telling them is accurate. At the end of the day I’d be riding these bikes anyways. Might as well make the content.
Shop Online! - www.thebicyclestation.com/
Quick correction, the ENVE cockpits are actually made in Utah. So they rims and the cockpits are us made. Super neat!
That powder blue with the tan walls and orange cages is complementary color perfection. Great job on this video. I always look forward to your builds.
Appreciate it!
I appreciated the attempt at PPE when cutting the steerer tube haha. Carbon particles cutting your lungs with every breath for the rest of you life doesn’t sounds too fun
8:11
A+ for safety mask
F for safety squints 😂
This bike came out perfect!
Thanks!
Damn, you got the one piece AR cockpit? That's so sock. Now I'm going to watch this whole video. I can't wait for Enve to release the road SES one piece cockpit for the price of $9,000.
I wish it cost more tbh
Looks so good. Thanks for the fun video!
al little bit with the hairdryer on the decals before removing 👍👍👌👌
Y’all are crazy with the integrated headset situation. Makes for good content watching y’all do it tho! Love the vids
Daily life in a shop at this point lol. Trying to make it fun lol
0:23 Man, I always do the same, I rewatch my videos and I even follow myself.
Thanks- I may follow your lead. I did not yet attach the shifters so I can pull them. It was feeling like the sleeves were making it hard to fully pull the hoses through.
3.4's look sick
Yea I love gloss wheels like that. The whole 2.1 tire thing just looked a little off to me so I switched it. If you dm me on instagram I’ll send you a pic of what it looked like with the 3.4s
The 1 piece bar/stem comes with 2 short pieces of foam sleeve. Assumably to baffle noise inside the bar/stem. I do agree that they are a hassle to use because they bind up at the exit hole where the hose exits and goes external as you mention. It sounds like you did not use them? Glad to hear there is no noise. I may follow your lead.
Yea it’s been an amazing bar. I didn’t realize they came with them. But wouldn’t have used them had I haha
Decals come off super easy with a hair dryer. Heat is your friend
Killer bike! Are those 650 or 700 wheels?
700. I don’t think the mog works with 650b
@@bicyclestation Thank you!
You should still glue the bartape. Just burn the edge to prevent fraying.
Trey’s Road Crew shirt 🔥
What is the brand of bar tape used on this build?
Nice build 💯👌 love the spec of mog. Are those m525 wheel set with xdr hubs?
They are. I think they are kinda cool
@@bicyclestation thinking on doing that set up also. Building a mog right now 1x12 with MTB group set. Thinking between drop bar or flat bar.
I’m unsure it would be possible with a flat bar. I don’t know of a flat bar with internal cables on the market currently
@@bicyclestation they have the fsa icg flat bar, just contemplating between the two. Love all the bikes that you guys build. 💯👌
It looks like you chose to forgo using the small sleeves that go inside the 1 piece bar/stem for the hoses? Do you find that it doesn't make a difference with respect to noise? Or just a hassle to get them in the bars?
The cables run on the outside of the bar part. Is there a sleeve for the stem part? I honestly didn’t notice haha. No noise at all
Is that the XX SL crankset and if so, did you use the stadard or wide version and what spacers did you use to acheive the 55mm chainline? I am about to start a very similar build and that info would be very helpful!
The shell is road so I used mtb wide bb infinite spacers and that worked! Idk what bb infinite would recommend but mtb wide spacers work
I’m doing a similar build but with force road wide crank. It seems like a ton of spacers where the spindle isn’t going to rest on the bearings. How many spacers did you have to use? And did you use inboard t47 BB?
@@bam0505 I used a T47 inboard Wheels Mfg BB. Im not certain the exact number of spacers i used or on which side, i just added spacers to the drive side until a had the desired 55mm chainline, then filled out the gab on the non-drive side. Wheels Mfg bbs come with plenty of scaers included in various iszes, so it makes it pretty simple. I had no issudes wit hthe crank spindle not being on the bearing surface, there was plenty of room. I used a standard mtb width axle Dub XX SL cranks set, which is the same width as a DUB road Wide crank set.
Thanks. That’s helpful. I used the same wheels mfg bb and using SRAMs suggested 2.5/5.5 spacers the preload was coming off the threads. I have it now with I think 6.5 on the drive side. Crankset seems to be centered. But I’m a bit worried about the spindle not resting on the actual bearings. I’ve never understood why spindles are skinnier in the middle… also is it the case where this is less likely an issue with mtb vs road wide spindle because the contact points are different lengths??
These dudes are hilarious 😂😅😂
Id love a fray as a do it all bike
Email me. I can get you one. jesse@thebicyclestation.com
pro tip for the frays bic lighter then just a tad. too much and it could catch a flame and look burnt or bubble just stop it out with bottom of the bic, mess on your hands no go.
I’ve tried that! But yea I burnt my finger lol. Decided I’m not skilled enough with the lighter to pull it off
@@bicyclestation wouldn't work with like a zippo has to be bic. Anywho I'm learning myself no shop to my name but building stuff is cool like yeah made that!
There’s a reel I made of me doing the whole fire thing lol. instagram.com/reel/CfP5rc4FlRV/?igsh=MTQ2b3UzeGdjd2o2aA==
So you are telling me that I should get some adhesive backed Velcro for the di2 battery in my Checkpoint? 😊
Is the Garmin mount for the one piece cockpit compatible with a go pro mount underneath for a light mount? THX
I didn't have he patience to watch the whole build, It's a Shimano Di2 groupset, yes? Is the solid black chainring standard or was that different?
Sram mullet build
@@bicyclestation Thanks! Looks great! I rented a MOG in Girona and loved it. It was set up with a sram 2x.
SRAM can get you the chain length, they sent me setup key, cog and chain length for my size mog and chainrings 40 through 50
Still wondering where the hell is Enve fitting the Fray in between the MOG and Melee geo! That are not that different!
Which Bottle cages are those?
Silca ti
I would ride one of those
Is the cloth for sale? how are they called!
www.campandgoslow.com
Hi there. What is this group set?
XXSL
WHY THE XX CRANKSET JUST SLEEPING ON THE TABLE! it cost the same as the handlebars lol
Idk where else I’d set it. I have like 5 sets in a drawer lol
@@bicyclestation thats the Power meter one? hehe
Honestly why running the XX rearD instead of one of those for road/gravel ? Or is it intended for gravel also?
Im running it on my 85 NM ebike, which seems sketchy now..
I want the wider q factor
@@bicyclestation seems like the 168 q factor has bigger demand, hence we are in luck. I just aquired the xx power meter with Big q factor 174 at 800$
Seems cheap compared to 1000 lol
Prices is insane at this point
Idk man like that cranks got a whole computer in it and it’s less then 1000$. Think about how much man hours went into the design and manufacturing
I was offended by the bar tape choice in the thumbnail, but seeing the actual video I dig it
So just own a bike shop so I can build any bike I cant afford?? haha I love these videos btw
SUCH an impressive weight with those big MB tires on them! Now you gota go do badlands in Europe in that thing!!!
Kate Spade?
That cockpit price is absurd, looks sick but that's just way too high.
The problem is they sold out of them. Now everyone is gonna raise their prices lol
Something hilariously ironic about running a $1200 integrated aero bar, in 44cm width 😂
Hahaha that’s the goal. It makes Trey so mad
how do you afford multiple new builds like that every month or so haha?
My rich dad buys them all for me lol.
Being serious, It’s part of my shops marketing budget. It’s very rare when we lose money reselling them. And if we do it’s not more then a few hundred dollars. The sales generated from these videos far outweighs the cost of making them. I have more firsthand knowledge of the bikes then most any bikeshop employee in the world and when I’m selling a bike to a customer I can be 1000% confident in what I’m telling them is accurate. At the end of the day I’d be riding these bikes anyways. Might as well make the content.
Love 2 see you do a lauf siegla build
Nice content, nice build! Why the subtitles though?
Ummm it’s a TH-cam trend I think. A lot of channels add them in.
Enve is nice but there gear is insanely expensive
Enve has a new MOG coming out this month 😮
I think that’s a different bike
"secret door" is to charge di2
The cockpits are made in Utah but no not the other bars
Oh yea they say that on the website. My bad. That’s sick
you know some wireless mic’s would really make the video’s a lot higher quality……. for very few dollars.
Use a heat gun lol
If you’re going off road get a mountain bike. Grovel bikes mediocre at everything
If you’re old and scared
Gravel bikes are one of the biggest scams in the bike industry, together with e-bikes. if you want to ride off the road, get an mtb.😊