Always Press The Handbrake Button? Myth Busted
ฝัง
- เผยแพร่เมื่อ 22 มี.ค. 2016
- Always Depress The Handbrake Button? Should you always press the button when applying the parking brake? Will the parking brake wear out if you don't press the button? What's the best way to apply the emergency brake? Will not pressing the handbrake button cause it to wear out? Let's look at how parking brakes work, to better understand why the mechanism will not wear out. Wear results when two objects contact one another at different speeds. This generates heat, and heat accelerates wear. With a parking brake, the speed difference and heat generation is so minimal that wear is not something to be concerned with. This is why you'll still hear the ratcheting mechanism on foot brakes, as well as socket wrenches.
Related Videos
Gas Vs Diesel - • Gasoline Vs Diesel - 4...
Piston Rings - • Piston Rings & Blowby ...
5 Things Never Do In A Manual - • 5 Things You Should Ne...
And don't forget to check out my other pages below!
Facebook: / engineeringexplained
Official Website: www.howdoesacarwork.com
Twitter: / jasonfenske13
Instagram: / engineeringexplained
Car Throttle: www.carthrottle.com/user/engi...
EE Extra: / @engineeringexplainede...
NEW VIDEO EVERY WEDNESDAY! - ยานยนต์และพาหนะ
randomly whips out a brake disc and pad
Seems normal to me ;)
Kurai Ryuu Please, he carries a clutch plate everywhere he goes
Dont you carry one with you on a daily basis
XDDDDDDDDDDDDDDDDD
How is it random when the topic is brakes?
The handbrake on my truck has been pulled without pressing the button for 47 years and almost 600,000 miles and it still works the same as always.
+luke Fugate That's awesome that your truck is still ticking!
Engineering Explained It's been driven by four generations of my family. I still drive it out of the creek(shown in my profile pic)every day.
+luke Fugate same here but it's actually 20 y/o 4x4 and around 550.000km (don't know how much in miles)
+someone That's about 341,754 miles.
+RedBearded T (SRN) lol. "That's about exactly this specific number"
that socket wrench analogy was gold
Exactly!
My socket wrench wore out and wasn't a cheap Chinese one. It was a bacho one.
Except that as a socket wrench spins in the reverse direction it is under 0 load. When using the ratchet on the parking brake, the load increases with each click. I agree with Jason when he says if it is worn out the car is probably done too, but it still does create needless wear when the alternative is so incredibly easy. I guess a lot of "us" just see it as laziness
Look at it again... Its not the ratchet increasing load, its the cable tension because you're aplying pressure to the brake pads (its not actually changing any wear with the ratchet mechanism, look at it closely). If you were to disconnect your brake cable, it would move buttery smooth, its not the ratchet. Remember to connect the brake cables afterwards though!
the wear is so negligible it doesnt matter. thats the whole point of the video. car parts are meant to last to a certain extent and parking brakes arent used too often
Better not engage the brakes when driving, it causes unnecessary wear to the brake pads and shortens the life of them!
+Angry Skipper and it wastes kinetic energy, lowering your fuel economy, great info thanks for sharing!
I was merely being satire :) Haha
To all the people who are saying they still want to engage the handbrake with the button.
what you say is actually written in the owner's manual of my 1953 Citroen Traction Avant ! in french, of course, but it's someething like : "Using brakes is an useless expense. use only when absolutely necessary"
I'm hope that translates to "brakes" not "breaks.
personally I love the ratcheting sound. Auto manufacturers should make it even louder.
lol
+Wayne Wildman I agree. I own a newer VW Passat and it has an electrical handbrake. I miss the click sound :(
+amanoncrack I don't think it's an emergency brake anymore. It's a parking brake. I need to test, but I wonder if it will even work if the cars battery is dead/disconnected.
amanoncrack I don't know, probably to simplify the interior. A big handle does take quite the space in the middle. Electronic brakes are also good since you don't need to tighten the cable, but does of course mean that repairs will be much more expensive.
Sad thing is that I live in Sweden where there are a lot of snow, and I can't do any handbrake turns or anything to have fun in the snow due to that button. It's a frontwheel drive too. It's a very boring car, but I still love it
Jason Taylor The brake would be on if I put it on before disconnecting the battery, but if I disconnect it prior to pressing it it wouldn't work
I'm glad everyone in the comments understands that wear is a result of friction. I assumed this much was obvious - but it is wrong to assume. When I stated wear occurs as a result of heat, my intention was to explain that heat can dramatically accelerate wear. The brake pads and tires were my example. Hope you're all having a great day!
Can drums be drilled for it to decrease heat, and water insertion or should it damage the drum also if you make a vid how drums work it will be much appreciated thanks
+zerohunter64 They could but they wouldn't work for very long after that. Water in the drum is an awful idea. Spray it on the outside in that case. But why bother improving redundant technology that can never be better than what replaced it? It's better just to change to disks, because it's not brake fade that's the issue with drums.
Well i know but some very old cars have drums in the four wheels and when its raining its very hard to stop and upgrading to disk is too much money involve thats why i ask if is possible. Oh and the holes are for removing the water not for inserting water
zerohunter64 There should not be water in them.
+Engineering Explained I think you simplified this explanation a little too much but I think I get your intention. Supposing you are right with the life span of it, there is still the point that it just hurts my ears.
It won't break, it will just brake.
Wow, that was bad. :P
oh, stop
Here have a cookie
I like it 😂
o, my, god
Even though you posted this 2 years ago I still want you to get out! Lol
I sure hope those Car Throttle guys saw this.
Do not push on the throtle you will wear it out, Tie a bit of string to it and pull.. Lol
Do you not just see the rachete thing?.. if you say you wear the hand brake and should not use it,, then you must be one that dose not use the rachete on you spanner,,, simple Logic as spok would say
Kevin Lew lol, those guys are ridiculous.
i pull my handbrake up to make toast on the hood
Tbh, they didn't say that it's wearing the handbrake out, they are just addressing the noise that it makes.
same noise when you put the car in park while driving... bet you don't do that every time you put it in park either.
Look at the smirk on his face throughout the video, he's laughing inside cause he probably can't believe he's having to explain a parking break to people who give him crap for it
+Alex Silva brake*, and I noticed that too I was laughing with him.
Can't believe people need to have the correct spelling of brake explained to them.
the linkage and bears of the ratchet system, also it wears and puts tension on the brake cables if you use the handbrake, better to not use it at all
Hilarious
Thank you to Car Throttle for perpetuating this myth.
lol
Friction causes heat, genius.
Yes friction, but you would probably have to sit there pulling it up and letting it down for a pretty long time for there to be enough wear for it to fail. Like a thousand years.
But the damage the friction creates is so small it can be disregarded. Very small quantities that are used to describe inevitably larger numbers are sometimes not needed since they affect it a very small quantities that isn't even noticeable until a very very long time frame. But if you are oh so well versed scientifically and care so much for that small detail then instead of using 300 000 000 as the speed of light, use the exact value which is 299 792 458 in every computation you would use that constant. Also, when facing non-repeating decimal numbers, like the value of pi, use as much of the space you can to write the farthest decimal value you can since accuracy is that important to you. Lol.
Yeah you'd only have to ratchet the hand brake up about 1 billion times to wear it down enough to not work anymore. What a smart thing to mention.
I always use mcdonnald's drive-though instead of going inside in order to avoid wearing out the dome light.
Yeah, but then you excessively wear out your window and window support system from rolling it up and down and up and down and..... :-P
Yea so wear out your starter instead
@@pauliespats112 That's why people go inside and leave it idling for 10 minutes, so the starter doesn't wear out ;)
@@MozzaBurger88 seems like a good way to get a car stolen
@@odeo5691 simple fix is to lock the car from the inside and have your spare door key clipped to the inside of your gas cap door or under a bumper etcetera. Cops tie em to the gas cap so they can leave the a/c on while they keep it locked
I wonder if anyone has ever had to replace the ratchet mechanism. I've never heard of one wearing out.
Way too late, but I have an AE92 Corolla from the 90s. I engage the handbrake regularly, multiple times. It's not even close to getting worn out.
Well my brother in his 1992 golf mk2 completly splited in half ratcheting mechanism, idk how but he did it
@@sinisavujkovic8299 One of my cousins managed to break the handbrake ratchet on his Civic too. It was honestly the first time I saw a broken handbrake ratchet. I've seen ratchets that have stopped working but broken ratchet was a first lol.
I have
Even later. I had a Peugeot where the handbrake ratchet wore out to the extent it would release if you tapped on the handle. Pulling the button in saves taking the edge off the teeth
It is so refreshing to hear someone using facts and logic instead of "feelings" to prove their point. Well done.
Don Brotherton like Christianity
White Lmh Any religion at all
So it's called engineering
@@filmweaver2013 it's called science
666th like
Here's one for the "worried about wear" crowd: pressing the button when applying the parking break will wear out the spring! 🙃
Aaaaaahhhhhhhh! Now what do I do?!
@@briant7265 don't use the brakes at all. just let the environment stop your car 😅
@@zumabbar 😆😂😂
@@zumabbar aaahhhhhh yes natural selection
Am I the only one who loves the sound of a proper hand brake ratcheting?
Same
No I know what you mean joint the gang, You know it has cault on as high a point as it can when you do not hit that button,,
yeah..u are the best musician..every single knot of sound is an art.. lol
Same. I feel like it's holding hard and sure when i hear that sound
wait...are you the british guy i talked to in jackfrags video?
He roasted everyone with the socket wrench example v
Socket wrench’s never wear out do they?
I've worn out a couple of 3/8 ratchets, they just slip because the teeth were worn down.
@@daily501 I was taking the piss. I’ve binned quite a few down the years mostly Britool as that’s my favourite brand. ( after keeping them for potential spares, I got real and chucked them)
There’s a lot of people who seem to think that the metall to metal contact and stress in a handbrake ratchet is exempt from the rules of physics that eventually fucks everything else.
@@highdownmartin i was replying to original comment mate. I fully agree with you about the metal to metal wear, I always push the button when operating handbrake lever. Have a good Bank Holiday weekend mate
@@daily501 and you fella
I only push the button for handbrake turns.
The socket wrench was a great comparison. That's a way to prove a point!
+Jeff V agreed
Ratchets do wear out. The internals have to be replaced after a bit of use. Any pro mechanic has rebuilt their ratchet or had the tool truck do it. With that said, I agree with this video.
I always pulled the handbrake without pushing the button. I assumed the button was only for putting it down.
Same
You must be very smart
Because it is
Hi bladed
you assumed right
"The thing to think about when thinking about"
lol
OveRMinDTR
Spoken like a true engineer!
Hahaha I was wondering if someone else would write that in the comments ;-DD
Those kinds of drivers keep their tv remote in a plastic baggy
+xartpant Hey, it does sound like someone is overly cautious, but it makes sense after the first time you get something spilled on it.
+xartpant I've had cars past 300k and they still haven't worn out the parking break ratchet. Anyone who is afraid of any wear at all might as well never drive their car
+GrimFaceHunter If you spill something on it once it's nothing but if it becomes a problem to where you have to take extra precautions to protect a remote from spills, you should maybe stop spilling your drink on your remotes. The problem isn't the remote getting wet.
Grant Brewer Well, there are also other people using the remote and accidents do happen.
i never use the hand-brake i don't want to wear out my pads, in fact i still have a brand new car in my garage from 2005 i don't drive it because i don't want to get bugs on the paint.
At first I was gunnu be like this guys a complete dumbass then I started laughing lololol😂😂
Holy crap. Give it a few more years and your car becomes a highly priced antique.
Don't buy a car. It will wear down your financial capabilities.
That's so true it gets sad...
Alec Cross That is if you dont use it properly. Like if u use it to enhance the fluidity of your Work flow like imagine having a business and you need to go to several places at once. If it is a financial drain to you , it may not be the case to other people,.
Tarciso Filho tell me more
@@nikyabodigital its called a "joke" you know, comedy? relax bro no need to take it so seriously plus he didnt ask for your opinon lol stfu and mind your business
Don' pay a internet. It will wear down....
I gotta show this video to my mom... She keeps telling me not the pull the handbreak without pushing the button. Thanks, now I will be relieved.
while I completely agree with you that the ratchet mechanism on the handbrake is designed to be used... as a ratchet, I disagree with your statement that wear is caused by heat. heat is caused by friction, wear is also caused by friction, it's just that when you have enough friction to cause significant amounts of heat very regularly then there is a lot of friction, lots of friction also causes lots of wear.
+Neil Sheriff Heat accelerates wear. Apologies if that point was unclear - obviously there must be friction for wear.
+Engineering Explained although i agree with your points, i think you could have used the term negligible more. yes, using the ratchet will cause wear. any contact between surfaces will cause wear. but this system is great because it is cheap and the wear is negligible. the heat generated from use is soo minute that i doubt it could even be measured. but i love your comment about how if the ratchet wears out... the car is probably done anyway. still, there can be an occasion where these parts wear out... but even then... lets be honest. it isnt the most expensive fix for a car. a ratchet mechanism, some metal and plastic. buy the new part and self installation would be under an hour.
+Engineering Explained how fast to tires wear out during handbrake turns? is there a proper way to execute a turn without completely mutilating the tire?
+Engineering Explained thanks for your explanation, it may be worth making this a subject of another video or more specifically about heat stresses. I'd still maintain that heat in itself doesn't cause wear, however that it can accelerate the wear of components which experience extreme heat stresses such as brake discs where the constant heating and cooling can cause microscopic surface fractures which will then wear more quickly when friction is applied but the heat in itself hasn't caused wear of the discs. Heat is generated in the ratchet mechanism, but not enough to cause the stresses that produce effects which can cause accelerated wear.
Thomas Ferguson ... are you serious?
+1 for using the socket wrench as a great example.
i like your videos, mainly because you use props and explain with it. This is a great way to verbally and visually help people understand "FULLY" what you mean by what you're saying. Very enjoyable because i analyze a lot and sometimes to much and confuse myself. with this technique of explaining it helps me a lot and im sure a lot others. Thanks for the vids and congrats on the amount of veiws you have been getting.
i like to test my car when i stop on a hill and see how many clicks it takes for the car to stop moving, well i get bored waiting for my woman to get ready and come of the house..
How many clicks to stop the car on a 2% grade? How many clicks total? How many clicks before it's time for new brakes?
T Shuart Ha Ha I am not sure how many but i think thet fail on the amount it moves as the mot fail will say . " Hand brake travel excesive"
Same here
On a very steep hill, 4 clicks would be enough
AthletismeQc I just pull it up till I feel it’s enough lol
The parking break should be pulled all the way, all the time. But usually carmakers do tests to figure how many 'clicks' it takes to park the car on a predetermined hill.
In Alex's words, "it's like going in without lube"
I was told not to turn the steering wheel all the way to the left or right when turning my car at a U-turn. Is this another case of people educated by those that don't understand things?
+PacificCoastAuto yeah
+PacificCoastAuto Yes
anyone?
+PacificCoastAuto They were probably showing concern for the steering pump which will be running even though your wheel is at full lock. I don't know if this puts serious wear on the steering pump or not. You're probably fine doing this though- a U-turn is not a very common driving maneuver and, similarly to the ratcheting mechanism in the hand break, your car is designed to be able to turn to full lock. Manufacturers are smart enough to design vehicles to be able to do the functions they are able to do (including U-turns) without breaking immediately from normal use.
It'd be interesting to see what Jason has to say about this as well. +Engineering Explained
+PacificCoastAuto
It is a good measure not to reach the end of the travel of the steering wheel.. but depends on the system. Some old hydraulic unit will work harder (but within designed limits.. the over pressure valve will come off and the system will be running at max pressure designed.
Some systems will have a valve at the end of travel to release all the pressure from the pump at full lock. So aside the fluid circulating rapidly trough that valve without genearting any pressure is no real harm.
Whichever the system.. even non assisted, the full lock position will rest somewhere (at the steering rack end travel usually).. so any additional torque beside the lock will torqueout the pinion and rack - and if monkeyed around can cause harm.
It's the same when people tell you not to crack your knuckles because so called bad things will happen to your hands, in actual fact, it's more to do with people finding the crunching sound irritating lol.
I crack my knuckles AND I hate when other people to it. Yep.
Yeah, don't eat ice cream, give it to me. :D
I've heard this, but when I crack them too often my hands start hurting. That surely is a sign that it's not a good thing to do.
KapteinFruit When I was younger I used to crack my knuckles alot, one day I actually dislocated the ring finger on my left hand, wasn't nice :-(
Nigel Smith Yeah so it is not good to crack them. People love to tell others they are wrong lol just because they have a bad habit. :P
More than ten years ago when I was a learner driver, my driving instructor told me that pulling up the handbrake without pressing the button would wear out the mechanism. Since then, I've always pressed the button and when I accidentally make it make a bit of noise or hear someone else pulling up their handbrake fully and making a long grating noise, it makes me wince and think that it's created a bit of damage!
Logic & Physics: 1
Car Culture Hype: 0
Triggered
Cars Simplified more like engineering
Ralph Körner engineering is mostly made up of physics
Ralph Körner engineering is based on physical sciences.....
Ralph Körner Yes, engineering that was based on physics... what’s the point of this comment lmao
I love this, its always driven me crazy how people hate clicking the handbrake, but will gladly let out a clutch at 3500 rpm
+smoky bandaid It feels so satisfying to do it when you stop the car though, it's like the sound that signals the end of the drive.
Exactly, And besides, whos ever heard of a handbrake clicker wearing out.
1:45 he says the words "really fast" as a car whips by him in great speed. nice one!
The ratcheting sound is good. It tells the passengers the handbrake has been applied and it's safe to get out of the car. Great for kids who are in a rush to get out of the car i.e "don't open your doors till you hear the handbrake."
I'd never heard anyone talk about this until I saw Car Throttle whine about it.
+dansolodan Just what I was thinking.
dansolodan p
Car Throttle is going to be pissed! lol
IKR, but its the truth, Alex needs to understand it already.
45 years in the motor trade and never saw one handbrake ratchet replaced ever. had the same snap on ratchet for 30 years approx. still works perfect. Urban myth a bit like "a swan can break your leg with its wing" lol..
Brilliant explanation with that ratchet wrench! That totally busted the myth for me!
If you wanna be really pedantic, pushing the button every time you engage the brake will wear out the spring :P
+Cadde And how many tires were worn from just driving??
It should be illegal ...
+Cadde
Good point!! We need to stop sitting on seats
Oh no, come to think of it, my car will wear out if I drive it! I'll just walk, and petition for a ban on cars, cuz you know, they'll wear out if you use them.
+fetB We can only seat on things that don't wear out. Let's seat on water.
+Max Rein Make sure you are bare foot, you don't want to wear out your shoes.
I always pull it up without pressing the button.. Thug life
1, 2, 3, and to the 4...
+Jasiah Cisco Snoop ratchy ratch and spring replacement's at your door.. haha
+Jhonny Benitez Yo! That is gangsta! Lol
It does sound cool though.
Damn it feels good to be a gangster
The details of your explaination is mind blowing. Your videos are an institution buddy! This is the level of detail I want to go for my Qs in mind!
My 22yr old corolla (315,000 km) has had the no button hand brake pull from me for the last 21 years. My Dad taught me not to use the button when engaging the hand brake because it may overstretch the cable. I don't know if that's true or not, but I have had discussions with others who argue to depress the button. Lol. Thanks for the clip. Makes perfect sense to me. Love your informative and easy to understand videos. Thanks.
Pushing the button wears out the button!
+Green Black looooool
My son broke the button on his 08’ eclipse so it doesn’t ratchet at all, at least it isn’t stuck in the up position, won’t lock the e-brake, he lost the plastic button, have to replace the entire e-brake, handle and all. Freaking Mitsubishi
@@mfhouse2112 Should of bought a Subaru, jk I like Mitsubishi also
I love how you don't just tell people that it's not going to hurt it, you pull one apart and show the mechanism! Very happy I subscribed.
I totally agree that, on a well designed and built hand/parking brake the ratchet should be used as you describe. However, wear is not caused solely by heat. I once drove a van where the pawl of the hand/parking brake was made of mild steel working on a hardened ratchet and it did wear out. Cheap and not correctly designed, but cheap enough to replace.
Love your channel and videos! Always answers my questions
It's like pushing the button when fastening the seatbelt.
+Choujeen Yeah, I've recently come to terms with this, noticed how my handbrake doesn't actually engage well enough unless I click the ratchet at least once.
It's so satisfying hearing it click.
+Adrian Cortez lol I think it's rather unsatisfying....
+Adrian Cortez Yeah, I can't stand the noise, even though it's not wearing out anything, it sounds like it. However, the ratchet noise is satisfying.
car throttle = REKT
🤣🤣🤣🤣🤣🤣
I had this question but now it's much clearer to me. Thank you very much
I feel bad that you even had to make a video about this...
+Ashton Murch it started because of Car Throttle's new video
In Canada at least they teach you in driver training to not push the button to ensure the brake actually engages and is not slipping.
Really good point with the socket wrench. Now when I think about it in all my years of driving and car ownership & service have I ever had to replace the handbrake ratchet mechanism, or had anyone else tell me they had to do it.
AWESOME camerawork in this vid. Not easy, getting this focus, so close and in so little light.
I never think it's going to break. I just don't like the noise so I've been pushing the button in lol.
i love that sound!!!
Yoshimatsu414 I do the same, for the same reason. Irritating noise.
I like it....
Has your button wore out yet all that extra pressing will be bad for it.
I love the sound lol
"-instead of, you know; the way it's actually designed to work."
Thank you for calling it a "parking brake" and not an "e brake". What a relief. I expect that when you do videos on "wheels" you call them "wheels" and not "rims" too. Keep up the good work!
Thank you so much for letting us understand. Subscribed 🖤
Funny that Car Throttle had this listed as one of the things to never do. Maybe u need to take a trip to UK and talk with him in the tiny bathroom again.
Keep up the great content
Finally! I'm so sick of hearing people saying you should press the button and then pull up and trying to explain to them it causes no harm. I hope this videos get mores views in the coming weeks because people really need to understand this. Parking brakes located in the footwells make the same noise too! Apparently, people lack common sense. Which doesn't seem very common these days.
Also, reading these comments, how is the sound annoying? I suppose starting up the car sounds annoying? Typing on your keyboard sounds annoying? How about the noise your shower makes when it turns on? Seriously, if your response to this is "the sound is annoying," please stick to public transit.
exactly what I was thinking
The socket wrench analogy was a gem, thank you so much for this
I freaking love this channel! Made me discover a passion for cars !
Happy to hear it, thanks for watching!
The only trouble that I have experienced in my 38 years of driving is that the cables stretch and fail first. I have lived in some hilly areas of the fruited plain, always turn your wheels toward the curb and use your handbrake. I've watched many folks chasing their vehicles down the street. Sam.
it work pretty much like a bike cassette!
works*
free wheel body
+George-Alex Psathas yea but cassettes wear out tho and start skipping
+Karlis Miezis Mostly due to dirt etc getting on the chain so friction/heat increases - this wouldnt happen on a handbrake :P
No, it just doesn't
Your videos are awesome and detailed. You should be a talk show host or news broadcaster... seriously.
It's always awesome when people post TH-cam videos on how to work on cars, it saves me big time money.
Great video. My understanding is exactly yours. However my driving instructor (43 years ago!) told me to press the button in, so I've been doing that for the last 44 years. I admit the silence of the action of applying the handbrake with button depressed is subjectively more 'refined' than the ratchet sound and his car was new-ish so I can kind of understand his reaction, but scientific and logical it was not! You make very enjoyable videos. Subscribed! All the best, Rob in Switzerland.
When he said some people say it can cause unnecessary wear I immediately rolled my eyes.
I just kinda laughed to myself
Well they shouldn't brake either, it cause wear and tear on brake pads
+tokekkk Thats the importance of the word "necessary"
Good video and the absolutely best explanation I have seen!
People just need to argue, man. No logic required :D Cheers for the video!
Always the same... In the middle of the video "let's take a look at this..."
Grabs a brake pad and a disc out of nowhere xD
Nice video, keep up the good work, lovely explanations.
I wore out my handbrake in Tokyo when I was drifting against the grandson of yakuza mafia boss. Should I keep using the e brake while drifting in my fwd car or just use the brakes?
+DreiZ You should use the inertia drift!
Tokyoooooooooooooo drift
+Chola Tech Its front wheel drive, more gas = understeer, you won't be drifting you'll be going straight for the wall. However if it were RWD more gas would be correct. I would just use the hand brake, just look on eBay how much a new hand brake mechanism costs so you know what you are getting into if you damage it. The problem with using your brakes is it gots to all four wheels so I don't see how you could possibly drift by doing that. ALSO are you sure you haven't just worn down your back brakes? Try adjusting your handbrake if you have drum brakes it is incredibly simple you just hit the drum off when you are changing tires and there is a brake adjuster that will let you tighten the hand brake. If you have disk brakes it is a bit more complicated but still not hard just look it up on youtube. I believe +ChrisFix has a video on it.
+ForTheTech Could just go in reverse.
ForTheTech Bro, it`s a joke. F&F 3 - Tokyo Drift - the scene when Han is teaching Sean to drift :D
I've done this in videos without paying attention so many times and the comment section is 99% having a go at me for it. Thank you for this. I can sleep at night now.
The clicks are actually designed to give the driver a feedback how tight he's using the handbrake. You don't have to pull it all the way up everytime - just on let's say down or uphill. On a flat surface you don't need that much brake pressure or don't even use it at all: some say the inserted gear after power off the car is enough to hold it. Personally I prefer to use the handbrake as second guard against rolling...
The cable will snap long before the teeth grind down!
+Da Siver I was just thinking that. :P
Usually they just stretch. Had this happen in my old Honda. Cable stretched too far for adjustments to take up the slack and had to be replaced.
Anyone else actually enjoy the sound of the socket wrench being used?
+EyesOnThe2.5i I really angered my small engines teacher by "helicoptering" socket wrenches. That sound was just too awesome for me.
+EyesOnThe2.5i Yes. And I like the sound of the handbrake ratcheting as well.
+GemCat I angered my sex-ed teacher by "helicoptering" something else.
That explains a lot! Good video!
huh, a properly well done video. good job man
The ratcheting noise of the parking brake is so satisfying.
Right????? it's as relaxing as the sound of a ratchet
Car throttle...you watching this!!!!!
Hey, your channel is really cool and we learn a lot here.
Regarding braking, I have been wondering when it comes to hydraulic hand brakes for drifting, are there effects on the engine and transmission when the brakes are active? As in, driving in high speed and then the wheels are locked suddenly, does that not put lot of stress on the mechanical system of the car?
Thanks
Very informative, thank you!
Engineering OVERexplained
That's engineering for ya!
some people need it.
I know it doesn't cause wear. I just hate hearing the clicking on a parking brake for whatever reason (yet I don't mind it on a ratchet)
+djhero0071 same
+djhero0071 I love that sound.
i love the sound of the handbrake :D
Well done mate you explained it so well.
Thanks for the myth busting! ✌🏽
I just love the sound it makes.
I've never used in the button in my 93' Fox Mustang, the only way I feel comfortable about it being activated is if I can actually hear the mechanical action.
Nicely done video. Thanks.
I'm glad I can show people this video for the next time this argument comes up.
Pushing the button involves more moving pieces wich are also more fragile, so I'd say that pushing the button might actually lead to more problems than not pushing it!
+Arthur Tipaldi (rAthur) Lols, that's probably right!
This is a tip I learned years ago, before you pull the handbrake on press the footbrake hard .This pre applies the brake pads or shoes against the disc or drum and increases the efficiency of the handbrake application needing less effort and less stress on the mechanism.
If you’re pulling up the handbrake, you’re probably already stopped with your foot on the brake, meaning the pads are already contacting the rotors. Pushing harder on the pedal shouldn’t have much effect on the work the handbrake has to do, apart from some negligible flex in the braking system.
How I didn't find this channel before? Subscribing!
lol funny how you had to make a video about this, some people....
I've never pressed the button when applying the Handbrake! In fact, I never even knew people could think this was wrong! It just feels weird applying it with the button pressed!
You're the best youtuber ever.
That's very kind, thank you!!
I think it's also worth mentioning that the pressure being applied is quite low on the teeth. If it was a heavy system then it would have more (albeit still negligible) wear.
Showed it to my dad. Finally his myth is busted.