I was initially unconvinced by the Hendree design but this one really sells it to me. The weapons make so much more sense to me than the tiny shield stick thing the original Hendree had.
it really feels like the Heindree is a design purely made for show at Astacsssia, hence the antennae. Kind of disguising that these are just tools for putting down revolution behinf a knightly aesthetic
the biggest issue with bandai action bases is that you gotta spend 20 minutes clipping it out and building it. the simples stand just pops out of the bag ready to go.
I've noticed that it looks so much like the Heingra, the main differences being the rifle, shield, backpack as well as the back of its head and colour. I'm hoping to see some customs like I've seen with the Lfrith to replicate the Pre Production Type or even an official model kit later down the line, unlikely but here's hoping.
Yeah, I've used Figma or Nendoroid stands for some of my HG and RG kits. They are so nice. Bandai's stands do the job, but they are way too thick and visible for smaller kits like 1/144 scale.
Thanks for all of your great videos...super helpful for someone new to Gunpla (me!). The Heindree Sturm is my 5th build and everything was fine until I started posing it. The ball joint where the abs plug into the torso keeps popping out of the joint, preventing secure posing. Any thoughts on a remedy? Otherwise, this model is a great value and looks amazing. Thanks again!
Hey Mecha, are you gonna take a look at the Kyoukai Senki Multi Joint Frame weapon set? For a "Weapon Set" it's damned near an entire mecha kit on its own, lacking only its own torso part, and looks super interesting.
I like this design but I think I like the original Heindree more. I've got a different question for you, do you like to panel line on the runner or after builidng? Also, drill out that barrel! :)
Really liked how the round elements and tapered shapes the original design looked. The green also worked surprisingly well with the purple and made it look very non gundam, pretty cool mecha
You better be careful, good sir. I’m getting close to beating you on having the entire witch from Mercury collection. Only have eight kits left before I have the entire collection.
Any chance we can get a backpack fashion show with some of the earlier witch from mercury figures? I’m debating a mirasoul on a heindree storm/Michaelis kitbash and can’t find a picture of them together anywhere!
Hey mecha have u taken a look at the motor nuclear line of model kits if not I think u should bro they're really good and the yolopark Optimus prime is fantastic as well
I have that kit, bought it because the box art was so bad ass! Too bad the kit wasn’t. Definitely in my top 5 least favorite kits with the delta plus 😅
How are the Pour Type Gundam Markers? I've heard that they can cause the plastic to become brittle and crack. Has anyone noticed this with any of your model kits?
That's mainly an issue on ABS plastic, tends to be used for the inner frame or joints. The runner will say if it's ABS. Sometimes it cracks polystyrene if you leave a puddle of panel liner for a while
When in doubt, go for simple! The RX-78-02 will be a good starting point I believe. And if you have any 30 Minute Missions kits, find the one with the backpack with the most pegs and holes on it(Foresteri being the most ideal right now), and go ham!
So im hoping to do a kitbash with this as the base for the build. I do have a question if you see this. Can you remove the beam saber holder bit? And if so do you think the rocket launcher from the Zowort heavy would be able to connect in instead?
It looks like the beam saber holder is already on the pack piece but it shouldn't be difficult to just snip it off and use a pin vice to drill a hole to put the rocket launcher peg in. You might have to fill where you cut off the saber holder with some putty or use a piece of pla-plate and then just drill through it. The peg for the launcher might be the same as the peg for the Zowort's launcher so you can just do that unless you wanted the beam cannon and launcher.
@@3xasfast811 yeah if it is molded on i think ill swap it for the backpack unit on the demi trainer. that has two holes in it by default. Ill get the heindree sturm since even if i cant do my kitbash i love the way the normal one looks, then test it with the demi ive already got. if it works then ill get the gundvola and zowort heavy and pull the other pieces i had in mind
some people in the comments think that the wfm line is soft, but I have to disagree some of the designs go hard. love your videos man keep it up
It varies per person technically.
These people just like to bi_ch for no reason, just ignore them
Well, the plastic is a little softer than I'd like
@@Yfr28Gundvolva’s heel piece agrees with you
@@1Stunna2323for real bro
Man I love the heavy weapon grunt suits from WFM
Makes you wonder when Bandai releases hg Demi garrison…
@@a.p.studios8713please god
@@a.p.studios8713did you use a monkey paw because wish granted but it's pbandai
I was initially unconvinced by the Hendree design but this one really sells it to me. The weapons make so much more sense to me than the tiny shield stick thing the original Hendree had.
it really feels like the Heindree is a design purely made for show at Astacsssia, hence the antennae. Kind of disguising that these are just tools for putting down revolution behinf a knightly aesthetic
So far TWFM has constantly put out top tier kits. No duds yet
Mmmm i didnt like the demi trainer kits, so borring of a design, the demi barding is better, but still lacking
@@jackspicy7228 technically the Demi's were meant to be boring, they're basically school supplies, the barding however is perfect
the biggest issue with bandai action bases is that you gotta spend 20 minutes clipping it out and building it. the simples stand just pops out of the bag ready to go.
Ah yes ,the GM of the A.D Stella timeline
I love all the WfM grunts design, need to get them all at least.
Hey, the right thigh is reversed. You need to spin it around. Great review!
The touch... The feel... Of Grass...ley!
It's not cotton and definitely not soft.
I've noticed that it looks so much like the Heingra, the main differences being the rifle, shield, backpack as well as the back of its head and colour. I'm hoping to see some customs like I've seen with the Lfrith to replicate the Pre Production Type or even an official model kit later down the line, unlikely but here's hoping.
I've wanted this kit ever since it got announced.
Yeah, I've used Figma or Nendoroid stands for some of my HG and RG kits. They are so nice. Bandai's stands do the job, but they are way too thick and visible for smaller kits like 1/144 scale.
Wfm is the only series where i bought the grunts first before the main gundam
Lol same, not that i hate the gundam designs but these grunts really stand out and keep me hooked
You should make some videos of you making kitbashes
"The touch, the feel"
of COOOTTTTTOOOOON. The faabric of our liiiivesss.
Love the Good Smile Simple stand for 144s! What's your best stand recommendation for 1/100?
Grading system has been thrown out whack by the Witch from Mercury kits, all these Platinum are becoming the standard
Ngl all g witch grunts are awesome! Although i didn't like standard heindree that much
Thanks for all of your great videos...super helpful for someone new to Gunpla (me!). The Heindree Sturm is my 5th build and everything was fine until I started posing it. The ball joint where the abs plug into the torso keeps popping out of the joint, preventing secure posing. Any thoughts on a remedy? Otherwise, this model is a great value and looks amazing. Thanks again!
Yes another purple mobile suit XD
7:40 Drill ya barrels!
You can really see the 30 Minute Missions influence in this line
Hey Mecha, are you gonna take a look at the Kyoukai Senki Multi Joint Frame weapon set? For a "Weapon Set" it's damned near an entire mecha kit on its own, lacking only its own torso part, and looks super interesting.
I like this design but I think I like the original Heindree more. I've got a different question for you, do you like to panel line on the runner or after builidng? Also, drill out that barrel! :)
I agree the original was more cohesive and unique, this just slaps some guns on it, looks very typical.
Really liked how the round elements and tapered shapes the original design looked. The green also worked surprisingly well with the purple and made it look very non gundam, pretty cool mecha
When will we get a vid on your ibo gundam frame custom? We all have been waiting for the video
Wonder when we’ll get more WFM FM kits, or maybe even actual MGs
1 thing I would like for GSC to do is incorporate more holes in the stand base.
Woooo new review
You better be careful, good sir. I’m getting close to beating you on having the entire witch from Mercury collection. Only have eight kits left before I have the entire collection.
hey, @Mecha Gaikotsu where did you get your collapsible runner holder?
Yo mecha gaikotsu! Can you review demi barding when it has realease?
Any chance we can get a backpack fashion show with some of the earlier witch from mercury figures? I’m debating a mirasoul on a heindree storm/Michaelis kitbash and can’t find a picture of them together anywhere!
Are you going to review the rg Eva unit 03
That like grunt suit from 00
Is that daylight? A Gaikotsu first?
heindree looks like frog ninjas lol
Do those Good Smile stands you showed work with RG kits as well?, specifically the smaller ones like the Impulse or Wing Zero EW
I cant unsee how the chest piece looks like a frog face....
M'quve would like this suit
Hey mecha have u taken a look at the motor nuclear line of model kits if not I think u should bro they're really good and the yolopark Optimus prime is fantastic as well
CCP-068 Heingra (from the G-Witch Prologue)
⬇
CFP-010 Heindree
⬇
CFP-013 Heindree Sturm
10:51 Oh no~ Spooky is having bad dreams.
@xxnike0629xx Will you hoard their BOXES for your BOX fort?
@xxnike0629xx Also, do you have any plans to go back in building a kit again?
Getting knight type Spinatio vibe on this
The regular hiendree i skipped because of the armaments. This one though.
question MechaGaikotsu Will you be doing Any p-bandai 30 minutes mission kits?
Can you do a review on RG astray red frame please. Is it still worth the buy even though it's an old kit?
the body was like a shocked face
have you looked at the mg unicorn ova if not do a review of the mg hd coller=ms cage
I have that kit, bought it because the box art was so bad ass!
Too bad the kit wasn’t. Definitely in my top 5 least favorite kits with the delta plus 😅
Wait, the connection between the hip and leg on the hiendree’s right leg is backwards
the color scheme gave me GN-X vibes from Gundam 00.
Great review, as always. Am I the only one who sees an evil grinning face in the breastplate?😊
you have probably inverted the right hip section
26 seconds
Nice
What a good kit, unfortunately i cant stop thinking it has an stupid frog face on the chest XD
when i checked hlj for the simple stand, I found that it was discontinued :(
How are the Pour Type Gundam Markers? I've heard that they can cause the plastic to become brittle and crack. Has anyone noticed this with any of your model kits?
That's mainly an issue on ABS plastic, tends to be used for the inner frame or joints. The runner will say if it's ABS. Sometimes it cracks polystyrene if you leave a puddle of panel liner for a while
Hi i wonder what tools i need to build one of this ??
I should to buy that in shoppee Philippines 😅
Dilanza sol when?
It's look like a tallgeese but WFM ver.
Can any of you guys list down gunpla to buy for best friend
Heavy -dilanza- I mean, heindree
(I keep confusing the dilanza, heindree and zowort, I fr thought the dilanza sol was a zowort)
Where can I get those simple stands?
dilanza sol when?
Hey, do you have any recommendations for hg gunpla with the standard backpack adapter? I want a backpack with a lot of cannons.
When in doubt, go for simple!
The RX-78-02 will be a good starting point I believe.
And if you have any 30 Minute Missions kits, find the one with the backpack with the most pegs and holes on it(Foresteri being the most ideal right now), and go ham!
@MasterSwo-MK thanks!
They lied to us . . . Its supposed to be dark grey
Airbrush/ Painting Time 😅 sigh*
platinum? really? which one is better, the normal one or the sturm one?
You prefer green or purple?
Holup, ain't this called a *heindra* ?
_Or am I going insane?_
Mecha Gaikotsu presents Grassley's most reliable riot control in the form of plastic.
Miorine's "peacekeeping" force: Welp... they shot me with ineffectual bullets. Time for "operation 'mow them down'".
So im hoping to do a kitbash with this as the base for the build. I do have a question if you see this.
Can you remove the beam saber holder bit? And if so do you think the rocket launcher from the Zowort heavy would be able to connect in instead?
It looks like the beam saber holder is already on the pack piece but it shouldn't be difficult to just snip it off and use a pin vice to drill a hole to put the rocket launcher peg in. You might have to fill where you cut off the saber holder with some putty or use a piece of pla-plate and then just drill through it. The peg for the launcher might be the same as the peg for the Zowort's launcher so you can just do that unless you wanted the beam cannon and launcher.
@@3xasfast811 yeah if it is molded on i think ill swap it for the backpack unit on the demi trainer. that has two holes in it by default. Ill get the heindree sturm since even if i cant do my kitbash i love the way the normal one looks, then test it with the demi ive already got. if it works then ill get the gundvola and zowort heavy and pull the other pieces i had in mind
да сделай уже нормальный маникюр ))
Kinda look like 30min mission.
Algorithm
This looks like a demi trainer but with steroids for me
Like all other WfM kits it looks like it belongs in a build show.
all the witch kits look soft.
Mechagaykotsu is playing junk again
He played you hard, I see.
It's rubbish
Takes one to know one.
another one for the wishlist 🥲
Is it out of stock?