MISTAKES IN INSTALLTION OF CHILLED WATER PIPE RISER | HVAC | CHILLED WATER BRANCH by MEP TECH TIPS

Assalamualaikum,
#chilledwater #hvac #firefighting #plumbing #electrical
Friends,
In this video am showing some mistakes in installation of chilled water pipe due to very tied shaft, so i want your suggestion, comments and advice for this video.
If you like, I ask you to SUBSCRIBE to the channel and do not forget to activate the bell to not miss anything posted on the channel, also SHARE with a friend, thank you all, and good luck with your project.
Thanks
#meptechtips

[@manojthakur4316]

I would request you to please make more videos on chilled water pipes

[@vipulhodawdekar]

Considering bottom as supply and above as return. Both will need heavy modification. For return take tee and connect straight to riser going down without looping supply pipe but we require some modifications to match above and below riser for return line.for supply line you can install tee and rotate by 90 degree such that by using one more elbow supply line and return line tapoff side by side and not up and down.

[@joyceabraham9556]

It looks like velocity breaker to reduce the impact of water on joint's?

[@mdfahadiqubal4192]

Walaikum assalam why you stop posting video

[@junaiskp1423]

Is there any ASHRAE standard for spacing chilled water supply and return lines?

[@junaiskp1423]

It may lead to leakage.

[@machine21ify]

Taking tapping from elbow is not good Engineering practice for any service.Weak joint