Chainsaw hero How to install fuel lines On a Partner 351 / 370 Chainsaw
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Here we look at replacing all of the fuel lines primer bulb and Fuel filter On the partner chainsaws. If you find this video useful please hit that like button and subscribe to the channel and turn on that notification bell for future how to videos thank you for taking the time to watch this video.
Link to parts
www.ebay.co.uk...
Link to complete Kit including carburettor
www.ebay.co.uk...
Thank you,this Video was a great help with me,Best Regards from Germany,Bavaria
You save me a tremendous amount of time.
Thanks for your kindness !
You're the man of the situation... It would be a pleasure tou see you again .
Best wishes from France
3:07 my version is PARTNER 351, but that hole is double smaller, i got exactly same tube as you do now. How to pull the tube trough it, drill it wider or get other tube?
tube that i measured that was there, was exactly with these specs as we are now using... help... pls...
Coipdnt believe this was on utube. Ive taken mine to peices because 4 years ago the primer bulb was eaten by a mouse. I bodged it with a marrigold glove finger tip and two tie wraps for the day I needed it and ordered one from ebay. Replaced it two weeks later and ive since had sproket worn to dead, replaced and now the fuel pipes were like bone china. Shattered to dust. Taken it to bits now I jave some fuel line and jesus it was tight. I heated the pipe up with a lighter and pulled it and it stretched and tapered. So was easiky able to feed it in and pull through with fishing forceps. But the gasket on the carb broke too. So ill order another tonighg but those bloody fuel lines and where they went. Id have gotten it the wrong way round 🤣
Brilliant vid mate and a big thank you cause ive had mine for 28 years. Ive replaced everytbing else with sthil but the partner wont die. So if she'll keep on living ill keep her.
just the video i needed! Thanks!
6:30 you got the operation right - the fuel line with the filter from the tank goes to the inlet on the carburetor, then from the carburetor to the PURGE bulb, from there back into the tank.
Трубки "вход на праймер" и "сброс с карбюратора" перепутаны местами ... )))
The line that goes back into the tank from the primer pump, how far into the tank does it need to go? (The thick line)
PS: Very good video😊🙏🏻
Not much is a return line.excess fuel
Excellent video,slow and precise .welldone
Hi thank you your video was a great help nicely explained and easy to follow
Regards
Steve U.K. London
I think the thin tube is the exhaust, not the fuel inlet
As far as I know you are correct and there is even a small ”adapter” between the crankcase and the return fuel line.
Thank you very much Sir, you solved my issue with my Partner P740 that needed new fuel lines.
Hi sir
Do you have a Partner 351 chainsaw manifold?
What are the diameter sizes of both pipes, I bought carb kit from Ebay but only the larger pipe was supplied. Both pipes on mine disintegrated as soon as I moved the carb. Great video by the way.
The yellow fuel line is 3/32-inch ID x 3/16-inch OD x one foot long and the blue fuel line is 1/16-inch ID x 1/8-inch OD x one foot long
Look at several websites to find out how to do this job. This is definitely the best
Thank you. You helped me so much
Thank you very much for this Video! Greats from germany
Which country do you live in ?
Great video, but I can’t buying those fuel line set. Can you tell me the measurements of those two lines please?
Do you know the sizes?
Tradu și în Română.
Thanks. 👍
Done really well
Perfect! Very helpfull...on the very point! :)
Super la vidéo j'ai un le même problème