I would absolutely love you to make a video on how to replace the heater blower motor in an MX5 NC MK3, as mine is rattling, as if the bearings have gone. 😊👍
I presume it’s a case of removing the glove box and removing the plastic cover that covers the motor. Unscrewing it and then replacing it, but not sure.
@@tristrammcneil352 You can actually find the video for that procedure. Three phillips screws after the glove box is out. Easy peasy. Search YT for blower motor removal. I suspect your blower motor is rattling because there is crud / leaves/ debris in the blower hamster fan. Take it all out, clean it up and, voila, hopefully no more noise.
Nice video, very clear. Just a small point on the torque specs - they are usually measured as either foot-pounds (ft-lbs) or Newton-Meter (Nm) in vehicle application. You referenced pounds per square inch PSI which is used as a measurement of pressure within vehciles, I'm sure you knew what you meant though!
Hi, great video although when I go to purchase the oil through your link it states on Amazon not suitable for my car? I’ve got the 2.0 mx5 nc 2006. Thanks
The cover plates on your car did you paint them? Sorry for the questions it’s my first mx5 so I’m still getting to grips with what I can do and can’t do on it. I was thinking of spraying mine while they’re off while I undercoat.
Yeah I removed all of them, used an angle grinder and wire grinder to remove all the rust, sprayed them with Halfords metal primer them painted them with car spray paint that I had spray in the garage
Another good video!! helpful for me. Thanks a lot for your effort doing this videos!!
Glad it was helpful!
Excellent easy to follow video. More of these videos please 😊👍
Any particular video you’d like to see?
I would absolutely love you to make a video on how to replace the heater blower motor in an MX5 NC MK3, as mine is rattling, as if the bearings have gone. 😊👍
I presume it’s a case of removing the glove box and removing the plastic cover that covers the motor. Unscrewing it and then replacing it, but not sure.
@@tristrammcneil352
You can actually find the video for that procedure. Three phillips screws after the glove box is out. Easy peasy. Search YT for blower motor removal. I suspect your blower motor is rattling because there is crud / leaves/ debris in the blower hamster fan. Take it all out, clean it up and, voila, hopefully no more noise.
Nice video, very clear. Just a small point on the torque specs - they are usually measured as either foot-pounds (ft-lbs) or Newton-Meter (Nm) in vehicle application. You referenced pounds per square inch PSI which is used as a measurement of pressure within vehciles, I'm sure you knew what you meant though!
Thanks for the info!
so is it 44ft/lb ?
@@Carl_Donaldson from a quick google it looks likethe torque range is 29-39 ft-lbs (34 in the middle).. but check for a manual or something!
Excellent video.
How many liters for the gearbox oil is needed please
Thank you for the comments, I used about 1.75ltr, I had just over a quarter of a litre left.
@@jackos5s Many thanks
Hi, great video although when I go to purchase the oil through your link it states on Amazon not suitable for my car? I’ve got the 2.0 mx5 nc 2006. Thanks
Thank you for the comments, the link probably needs removing because the video is now over a year old
The cover plates on your car did you paint them? Sorry for the questions it’s my first mx5 so I’m still getting to grips with what I can do and can’t do on it. I was thinking of spraying mine while they’re off while I undercoat.
That’s why I do the videos to help people, I also recommend MX5-Europe NC/MK3 (2006-2015) group. Can I please ask which covers you mean?
Thanks I’ll take a look at that group now. The blue cover plates you take off to get to the drain / filler plugs.
Yeah I removed all of them, used an angle grinder and wire grinder to remove all the rust, sprayed them with Halfords metal primer them painted them with car spray paint that I had spray in the garage
All 80 000km fill in Gearbox (Getriebe) 2 Liter 75/90 GL 4/5 ! Einlass ist konisch Ablass with 25-40 Nm !
Sorry for the delay been on holiday, absolutely 👍 thanks for sharing the information
How many liters did you use for the gearbox?
Thanks
Hi Buddy I purchased 2x 1 ltr bottles and if I remember correctly I used a full one and just over half of the second one
@@jackos5s Many thanks.
Very helpful video
Thank you 🙏